Table of Contents
Advertisement
Figure 14. Installing Tooled Rails in a Threaded-Hole Rack
3.
Attach the front of each rail to the front rack posts using the screws provided with the rack.
On a 4-post rack, slide each rail backward so that they seat into the back post holes at the desired
height. Attach each rail to a rear post using four screws provided with the rack (item 4 in Figure 13).
4.
Lift the chassis and slide it into the rails installed in the rack (Figure 14). Tighten the two thumb
screws and four rack screws (item 5 in Figure 14) on each flange to secure the chassis to the rack.
On a 2-post rack, slide each rail bracket (item 4 in Figure 14) forward to the post. Tighten two screws
(item 3 in Figure 14) to secure the bracket to each post.
20
Installing the Hardware
Advertisement
Table of Contents
