1. Manuals
  2. Brands
  3. Creative Playthings Manuals
  4. Play Sets & Playground Equipment
  5. Ridgefield
  6. Assembly manual

Creative Playthings Ridgefield Assembly Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Ridgefield
Model #SP 6400-000
ASSeMbly MAnuAl
The Ridgefield gym is built using the frame of the Williamsburg gym as a
base structure. When assembling the this gym, set aside the Williamsburg
instructions and follow the steps in this document.
Please read the owner's manual before assembling your play set.
it provides additional information on the care and use of your play set
you must carefully read the entire instruction manual before
proceeding with the assembly or use of your new play set.
Creative Playthings takes great care to design its products with your child's safety
in mind. However, only with careful supervision and proper safety instructions,
can you be assured of safe play time on any product designed for children.
This product is intended for single family home/residential use
only and not intended for use in any public setting. Placement in
any public setting constitutes a misuse of this product.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ridgefield and is the answer not in the manual?

Questions and answers

Related Manuals for Creative Playthings Ridgefield

Summary of Contents for Creative Playthings Ridgefield

  • Page 1 Ridgefield Model #SP 6400-000 ASSeMbly MAnuAl The Ridgefield gym is built using the frame of the Williamsburg gym as a base structure. When assembling the this gym, set aside the Williamsburg instructions and follow the steps in this document. Please read the owner’s manual before assembling your play set.

  • Page 2: Assembly Safety

    • until assembly is complete, do noT let your children use the play set. • never fasten anything not approved by Creative Playthings to your play set. Accessories or items not ap- proved by Creative Playthings include; dog runs, clothes lines, electrical devices, or bird feeders etc.

  • Page 3: Safe Play Area

    • The Ridgefield play set has ground dimensions of 5'-3" x 8'-8" (Accessories not included). • The Ridgefield play set requires a level ground surface of 19'-3" x 20'-8" for a Safe Play Area (Accessories not included). • Additional accessories may increase the size of the Safe Play Area.

  • Page 4: Hardware Bag Contents

    10 17036-1202 lag Screw 5/16 x 3" 12002-207 flat Washer 3/8" 106 17020-105 Screw #8 x 1-5/8" 12017-207 lock Washer 3/8" We have packaged more hardware than is required for assembly. Ridgefield Page 4 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)

  • Page 5: Pre-Assembly

    PRe-ASSeMbly All hardware on this set is specially coated for corrosion resistance. if non-Creative Playthings hardware is used, it MuST be galvanized or stainless steel. CReATiVe PlAyTHingS PlAy SeTS uSe A feW STAndARd ConneCTionS. beCoMing fAMiliAR WiTH THeSe ConneCTionS Will SiMPlify ASSeMbly And inSuRe A SAfeR PlAy PRoduCT foR youR CHildRen.
  • Page 6 1 15133-400 Slide mount - green 1 50334-700 Hardware Bag - SP (2005) 2 32429-102 Platform end - 2 x 6 x 59-1/4" 1 50345-100 Hole Cap Pack Ridgefield Page 6 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)

  • Page 7: Component Parts

    AH 2 33474-402 Panel Board 11/16 x 4-11/16 x 49-3/4" Ai* 4 33476-102 Panel frame 2 x 3 x 49-3/4" AJ 1 33478-102 Safety Rail 2 x 4 x 100-1/2" 1 50490-700 Hardware Pack, Yorktown/ Ridgefield BA* 1 40457-402 Side Panel (52-3/4" Wide) no Swing mounts are required to mount a Swing Beam in the standard position.

  • Page 8: Maintenance Instructions

    Tighten as required and specified in these instructions. do not over tighten. • Check structure twice monthly during usage for any evidence of deterioration. if upon inspection, hardware has sharp edges, rusted or structural pieces have signs of premature failure; replace them through Creative Playthings Customer Service.
  • Page 9 ASSeMbly inSTRuCTionS The Ridgefield gym is built using the frame of the Williamsburg gym as a base structure. When assembling the this gym, set aside the Williamsburg instructions and follow the steps in this document. Step 1 — Sandbox base & Corner Posts: note: The large hole at the Separate and identify hardware and components.
  • Page 10 5/16 x 4" Hex Bolt Assemblies as shown. fasten the remaining Sandbox Side (Q) to the Porch Corner Posts using four 5/16 x 4" Hex Bolt Assemblies. Ridgefield Page 10 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 11 Center Platform Support offset to the bottom of the board. use a hammer to slightly inset each Weld nut. drill 7/16"dia. hole 2" 1-1/2" insert 5/16" Weld nut from this side Ridgefield Page 11 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 12 Stringer to the Center Plat- form Support using one 5/16 x 5-1/2" lag Screw and one 5/16" flat Washer. Slightly offset toward the top Ridgefield Page 12 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 13 Stringers (g). install the inside String- ers between the Platform front and the Platform Back. fas- ten each inside Stringer using 5/16 x 4" lag Screws and flat Washers as shown. Ridgefield Page 13 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 14 Platform Board as shown. The edge of the board should align with the corner of the adjacent Posts. fasten the narrow Platform Board to the Stringers with eight #8 x 2" flat Head Wood Screws. Ridgefield Page 14 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 15 Step 17 — Right Wall Support: fasten the Right Wall Support (P) to the Porch Corner Posts above the Right Platform Side using four 5/16 x 4" Hex Bolt Assemblies. Ridgefield Page 15 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 16 Weld nut into the top hole and 3/8" Weld nuts from the Swing mounts on the next page for mounting details. beam hardware bag in the bottom holes before moving to the step 20. Ridgefield Page 16 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 17 Roof Assemblies. use a 5/16 x 2" Hex Bolt Assembly in each end of the Ceiling Joist. Tighten the Bolts holding the Roof Assemblies to the Corner Posts. Ridgefield Page 17 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 18 Panels in the same manner used in the previous step. door Panel is not shown at right. one Roof Panel has been omitted for clarity Ridgefield Page 18 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 19 Assemble and install the dormer as directed by the instruc- tions included in the dormer package. install the gable fans as directed by the instructions includ- ed in the gable fan package. Ridgefield Page 19 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)

  • Page 20: Step 30 - Panel Board

    Panel. fasten using #8 x 1-5/8" Screws. Repeat with the Panel at the other end of the gym. Ridgefield Page 20 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)

  • Page 21: Step 32 - Safety Rail

    Access ladder opening. important: When placing Wall Slats, never leave a gap larger than 3-1/4" except at access points, where the gap must be larger than 9". Ridgefield Page 21 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 22 An effort should be made to provide space to mount entrance Wall Slats and Hand grips on either side of the Access ladder. Your set-up will look different Ridgefield Page 22 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 23 Platform Board and continue with assembly. it may help to clear space for the Weld nut but using a 1" paddle bit on the underside of the Platform Board Ridgefield Page 23 © Copyright 2011, Creative Playthings 19803-100 Rev g (10-17)
  • Page 24 Save all instruction sheets and receipts in case it becomes necessary to con- tact Creative Playthings for warranty service and/or part replacement. The warranty can be found in your owner’s Manual. Please fill out the warranty card on the back of your owners manual. your completed warranty card will allow us to quickly process warranty claims.

Table of Contents