Board-To-Board Application Connector; Table 36: Technical Specifications Of Molex Board-To-Board Connector - Siemens AC75 Hardware Interface Description

AC75 Hardware Interface Description
Strictly confidential / Preliminary
6.3

Board-to-Board Application Connector

This section provides the specifications of the 80-pin board-to-board connector used to
connect AC75 to the external application.
Connector mounted on the AC75 module:
Type: 52991-0808 SlimStack Receptacle
80 pins, 0.50mm pitch,
for stacking heights from 3.0 to 4.0mm,
see Figure 44 for details.
Supplier: Molex
www.molex.com

Table 36: Technical specifications of Molex board-to-board connector

Parameter
Electrical
Number of Contacts
Contact spacing
Voltage
Rated current
Contact resistance
Insulation resistance
Dielectric Withstanding Voltage
Physical
Insulator material (housing)
Contact material
st
Insertion force 1
th
Insertion force 30
st
Withdrawal force 1
Maximum connection cycles
Mating connector types for the customer's application
offered by Molex:
•
53748-0808 SlimStack Plug, 3mm stacking height,
see Figure 45 for details.
•
53916-0808 SlimStack Plug, 4mm stacking height
AC75_HD_V00.202
Specification (80-pin B2B connector)
80
0.5mm (.020")
50V
0.5A max per contact
50mΩ max per contact
> 100MΩ
500V AC (for 1 minute)
White glass-filled LCP plastic, flammability UL 94V 0
Plating: Gold over nickel
< 74.4N
< 65.6N
> 10.8N
30 (@ 70mΩ max per contact)
Page 106 of 120
s
27.04.2006