03/2006
The individual bits can be set or reset by clicking on them with the mouse.
Alternatively they can be selected using the cursor keys and then pressing the
Toggle key.
S
S
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
Press the "OK" soft key to exit the bit editor and accept the set value.
Press the "Cancel" soft key to exit the bit editor and reject the set value.
The previous setting is restored.
6 Programming the control
6.1
Machine and setting data
6
6-51