Advertisement
Advertisement
Table of Contents
Related Manuals for ResMed Tx Link
Summary of Contents for ResMed Tx Link
- Page 1 Tx Link ConneCtion module Quick Setup Guide English...
-
Page 2: Intended Use
Furthermore, it relays real-time signals measured by the therapy device to a polysomnograph (PSG). The Tx Link is also a component of the VPAP Tx Lab System. The VPAP Tx Lab System provides remote PC control of a therapy device capable of delivering multiple therapy modes. -
Page 3: Device Connections
PSG connections Tx Link provides up to six color-coded analog DC outputs (A-F), which can be used to connect the real-time streams measured by the ResMed therapy device to a PSG system. To support many different types of PSG systems, each DC output is available at three connection points. - Page 4 The LEDs may be disabled during normal use to avoid patient disruption. However, in the disabled state, the LEDs will continue to indicate Tx Link status during power-up, or any system error state. For more information on enabling and disabling LEDs, refer to the EasyCare Tx Online Help.
- Page 5 Before connecting to the power outlet, insert the plug blade attachment suitable for your region into the power pack. Turning off the Tx Link To turn off the Tx Link, disconnect the power pack from the power outlet or turn off the switch at the power outlet. Setup...
-
Page 6: Cleaning And Maintenance
Administrator software. For further information refer to the EasyCare Tx Online Help. Cleaning and maintenance The exterior of the Tx Link unit and power pack may be cleaned with a damp cloth and mild liquid soap. WARNING • Always disconnect the power pack from the power outlet before cleaning. -
Page 7: Technical Specifications
Technical specifications Tx Link dimensions (H x W x L) 1.9" x 5.7" x 4.9" (47 mm x 145 mm x 123 mm) Tx Link weight 0.77 lb (350 g) Power pack dimensions 4.2" x 2.4" x 1.4" (106 mm x 60 mm x 36 mm) -
Page 8: Symbols Which Appear On The Device
• Only use the supplied power pack (APD Model No. WB-10F05RUGKN). • Plug pack supplied with Tx Link only to be used with this device. Not suitable for use with any other device. • Check the power pack periodically for signs of wear or damage. If the power pack is damaged, return it to your supplier for replacement. -
Page 9: Limited Warranty
Portable diagnostic/screening devices This warranty is only available to the initial consumer. It is not transferable. If the product fails under conditions of normal use, ResMed will repair or replace, at its option, the defective product or any of its components. - Page 10 ResMed shall not be responsible for any incidental or consequential damages claimed to have resulted from the sale, installation or use of any ResMed product. Some regions or states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.
- Page 11 ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia See www.resmed.com for other ResMed locations worldwide. For patent information, see www.resmed.com/ip. VPAP Tx is a trademark of ResMed Ltd and VPAP is registered in U.S. Patent and Trademark Office. © 2017 ResMed Ltd.
- Page 12 258206/3 2017-10 Tx Link QUICK SeTUp GUIDe GLobaL EnG Global leaders in sleep and respiratory medicine www.resmed.com...
Need help?
Do you have a question about the Tx Link and is the answer not in the manual?
Questions and answers