Garage Doors; Scenes - Nortek 2GIG GC3 User Manual

Garage Doors

Use the controls in the Garage Doors screen to open and
close garage doors. To operate the Garage Door controller:
1. Navigate to the Smart Home Controls menu. See
"Navigate to the Smart Home Controls Menu."
2. Tap Garage Doors.
3. At the Garage Door screen press the toggle to open
or close the Garage Door.

Scenes

NOTE: Consult your dealer to determine if this
feature is available or to have it turned ON.
Use the Scenes screen to create scenarios that defi ne
simple rules for how your Z-Wave home automation
devices work together. There is no functional limit on the
number of scenes that you can create to control lights,
home automation devices, and other alarm sensors.
Smart Home Controls > Scenes
Examples: When to Create Scenes
There are a wide variety of scenes that you can create.
Some of the more common include:
»
Leaving for the Day: Create a scene named
"Leave" to lock the door, turn off all lights, adjust the
thermostat.
»
Retire for the Night: Create a scene name "Good
Night" to switch OFF the downstairs lights, lock the
entry doors, illuminate a nightlight in the dwelling's
hallways, and adjust the thermostat setting.
36
»
Wake Up in the Morning: Create a scene
named "Good Morning" to adjust the thermostat
temperature, turn on family room lights, and turn on
the coffee pot.
Add a New Scene
To add a new scene:
1. Navigate to the Smart Home Controls menu. See
"Navigate to the Smart Home Controls Menu" at the
beginning of the Smart Home Controls section.
2. At the Smart Home Controls menu, tap Scenes.
3. At the Scenes screen, tap Edit Scenes.
Scenes > Edit Scenes
4. At the Scenes screen, tap Add New Scene.
Add New Scene
5. Enter a name for the new scene. Then tap Next.
For example, enter: Lock Up.
Copyright © 2019 Nortek Security & Control LLC