Robustel R3000 Lite Installation And Configuration Manual
  1. Manuals
  2. Brands
  3. Robustel Manuals
  4. Network Router
  5. GoRugged R3000 Lite
  6. Installation and configuration manual

Robustel R3000 Lite Installation And Configuration Manual

Dual sim industrial cellular vpn router
Hide thumbs Also See for R3000 Lite:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Robustel GoRugged R3000 Lite Quick Guide
Installation and Configuration
Quick Guide
R3000 Lite - Dual SIM Industrial Cellular VPN Router
Packing List
Before installing the R3000 Lite router, please verify the kit contents as following:
1 x Robustel R3000 Lite Industrial Dual SIM Cellular VPN Router
1 x Terminal block for power
1 x Quick Start Guide with download link of other documents or tools
Optional Accessories
AC/DC power supply adapter
Rubber/magnet SMA cellular antenna for HSPA+/LTE
Serial cable (DB9 female connector switches to DB9 male connector)
35 mm DIN rail mounting kit or wall mounting kit
*If any of the above items is missing or damaged, please contact your Robustel Sales Representative.
Environmental Requirements
Power input: 6 to 26 VDC
Power consumption: 100 mA@12 V in idle state, 400 mA (peak) @12 V in communication state
Operating temperature: -40 °C to 85 °C (R3000-L3E supports -20 °C to 75 °C)
Relative humidity: 5% to 95% RH
RT_QG_R3000 Lite v.1.0.2 (04.02.2017)
Confidential
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R3000 Lite and is the answer not in the manual?

Questions and answers

Related Manuals for Robustel R3000 Lite

Summary of Contents for Robustel R3000 Lite

  • Page 1 Serial cable (DB9 female connector switches to DB9 male connector)  35 mm DIN rail mounting kit or wall mounting kit *If any of the above items is missing or damaged, please contact your Robustel Sales Representative. Environmental Requirements Power input: 6 to 26 VDC Power consumption: 100 mA@12 V in idle state, 400 mA (peak) @12 V in communication state Operating temperature: -40 °C to 85 °C (R3000-L3E supports -20 °C to 75 °C)

  • Page 2: Chapter 1 Hardware Introduction

    Chapter 1 Hardware Introduction 1.1 Overview As shown in the following figure, the R3000 Lite router has an Ethernet port (LAN interface), a DB9 serial port (supports for RS232 and RS485), two cellular SIM card slots and two cellular antenna interfaces.
  • Page 3 Robustel GoRugged R3000 Lite Quick Guide 1.3 Pinouts RS485 PIN Polarity PIN Debug RS232 (2-wire) Positive polarity Data+ (A) Negative polarity PIN Function DRXD Data- (B) DTXD 1.4 LEDs LED Name Color State Description On, solid Router is booting Green...

  • Page 4: Reset Button

    Robustel GoRugged R3000 Lite Quick Guide 1.5 Reset Button Function Operation Reboot Press the button for at least 5 seconds in operating status After powering up the router, press the RST button by a small non-conductive Restore to factory stick with a blunt end in about 60 seconds until all three LEDs (RUN, PPP, USR) on default settings the left side blinking 5 times simultaneously.

  • Page 5: Chapter 2 Hardware Installation

    Robustel GoRugged R3000 Lite Quick Guide Chapter 2 Hardware Installation 2.1 Installation for the SIM Card Remove slot cover  Make sure router is powered off. To remove cover, loosen the screws associated with the cover by using a screwdriver and then find the SIM card slot.

  • Page 6: Grounding The Router

    2.4 Connect the Router to PC Connect the router’s Ethernet port to a PC through a standard crossed network cable. 2.5 Mounting the Router R3000 Lite router supports for horizontal surface placement, DIN rail mounting and wall mounting. Two methods for mounting the router ...
  • Page 7 Robustel GoRugged R3000 Lite Quick Guide  DIN rail mounting DIN rail size (unit: mm): Use 3 pcs of M3*4 countersunk phillips screws to fix the router on the DIN rail, and then hang the DIN rail on the bracket. It is necessary to choose the standard bracket.

  • Page 8: Power Supply

    Robustel GoRugged R3000 Lite Quick Guide 2.6 Power Supply R3000 Lite router supports reverse polarity protection, but always refers to the figure above to connect the power adapter correctly. There are two cables associated with the power adapter. Following to the color of the head, connect the cable marked red to the positive pole through a terminal block, and connect the yellow one to the negative in the same way.

  • Page 9: Chapter 3 Webpage Configuration

    There are two methods to configure the IP address on PC, one is to obtain an IP address automatically from Local Area Connection, and another is to configure a static IP address manually within the same subnet of R3000 Lite router. Please refer to the steps below: Window 7 System (the configuration for Windows system is similar) Click Start >...
  • Page 10 Robustel GoRugged R3000 Lite Quick Guide Click Properties in the window of Local Area Connection Status. Choose Internet Protocol Version 4 (TCP/IPv4) and click Properties. RT_QG_R3000 Lite v.1.0.2 (04.02.2017) Confidential...
  • Page 11 Robustel GoRugged R3000 Lite Quick Guide Two ways for configuring the IP address of PC Obtain an IP address automatically: Use the following IP address (configured a static IP address manually within the same subnet of R3000 Lite router): Click OK to finish the configuration.

  • Page 12: Logging In The Router

    192.168.0.1, though the actual address may vary. Note: If a public SIM card is inserted in the R3000 Lite router, you can enter the corresponding public IP address of the SIM card in the browser’s address bar, so that to access the R3000 Lite router wirelessly by this public IP.
  • Page 13 Robustel GoRugged R3000 Lite Quick Guide The home page of the R3000 Lite router’s web interface is displayed. For example: Note: To configure parameters should follow this order modify parameter 1 > Apply > modify parameter 2 > Apply > Save > Reboot.
  • Page 14 If the router has obtained the IP address, it means it is connected to the cellular network. 3.5 Configuration for the IP of LAN The default Ethernet IP address of R3000 Lite router is 192.168.0.1. There are two methods for configuring the IP addresses of the router, webpage configuration and CLI command configuration.
  • Page 15 R3000 Lite router. If yes, configure the IP address of the PC’s LAN interface manually to make the R3000 Lite router and the PC can access each other in the same LAN; or restore to the factory default settings of the R3000 Lite router via the Reset button.

Table of Contents