Robustel GoRugged R3000 Lite User Manual
  1. Manuals
  2. Brands
  3. Robustel Manuals
  4. Network Router
  5. GoRugged R3000 Lite
  6. User manual

Robustel GoRugged R3000 Lite User Manual

Dual sim industrial cellular vpn router for gsm/gprs/edge/umts/td-scdma/evdo/ hspa plus/lte networks
Hide thumbs Also See for GoRugged R3000 Lite:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Robustel GoRugged R3000 Lite
Dual SIM Industrial Cellular VPN Router
For GSM/GPRS/EDGE/UMTS/TD-SCDMA/EVDO/
HSPA+/LTE Networks

User Guide

Document Name:
User Guide
Firmware:
1.3.0
Date:
2016-11-15
Status:
Confidential
Doc ID:
RT_UG_R3000 Lite_v.1.4.1
www.robustel.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GoRugged R3000 Lite and is the answer not in the manual?

Questions and answers

Related Manuals for Robustel GoRugged R3000 Lite

Summary of Contents for Robustel GoRugged R3000 Lite

  • Page 1: User Guide

    Robustel GoRugged R3000 Lite Dual SIM Industrial Cellular VPN Router For GSM/GPRS/EDGE/UMTS/TD-SCDMA/EVDO/ HSPA+/LTE Networks User Guide Document Name: User Guide Firmware: 1.3.0 Date: 2016-11-15 Status: Confidential Doc ID: RT_UG_R3000 Lite_v.1.4.1 www.robustel.com...
  • Page 2 The contents of this document are subject to change without notice due to continued progress in methodology, design and manufacturing. Robustel shall have no liability for any error or damage of any kind resulting from the use of this document.
  • Page 3 Robustel accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the router, or for failure of the router to transmit or receive such data.
  • Page 4 Robustel GoRugged R3000 Lite User Guide Protecting your router To ensure error-free usage, please install and operate your router with care. Do remember the following:  Do not expose the router to extreme conditions such as high humidity/rain, high temperature, direct sunlight, ...
  • Page 5 Robustel GoRugged R3000 Lite User Guide Regulatory and Type Approval Information Table 1: Directives Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and...
  • Page 6 Robustel GoRugged R3000 Lite User Guide Revision History Updates between document versions are cumulative. Therefore, the latest document version contains all updates made to previous versions. Release Date Firmware Version Doc Version Change Description 2013-12-20 1.01.00 V1.0.0 Initial Release Removed IP Passthrough...
  • Page 7 Robustel GoRugged R3000 Lite User Guide  Updated section about 2.11 Power Supply 2016-11-15 1.3.0 v.1.4.1 RT_UG_R3000 Lite_v.1.4.1 15.11.2016 6 / 135 Confidential...

  • Page 8: Table Of Contents

    Robustel GoRugged R3000 Lite User Guide Contents Chapter 1 Product Concept ............................10 Overview ..............................10 Packing List ............................... 11 Specifications ............................13 Dimensions ............................... 14 Selection and Ordering Data ........................15 Chapter 2 Installation ..............................16 LED Indicators ............................16 PIN Assignment ............................
  • Page 9 Robustel GoRugged R3000 Lite User Guide 3.24 Configuration > GRE ..........................76 3.25 Configuration > L2TP ..........................77 3.26 Configuration > PPTP ..........................80 3.27 Configuration > Modbus over TCP ......................84 3.28 Configuration > Modbus Master ......................85 3.29 Configuration >...
  • Page 10 Robustel GoRugged R3000 Lite User Guide Glossary ..................................133 RT_UG_R3000 Lite_v.1.4.1 15.11.2016 9 / 135 Confidential...

  • Page 11: Chapter 1 Product Concept

    Robustel GoRugged R3000 Lite User Guide Chapter 1 Product Concept 1.1 Overview Robustel GoRugged R3000 Lite is a rugged cellular router offering state-of-the-art mobile connectivity for machine to machine (M2M) applications.  Dual SIM redundancy for continuous cellular connections; supports 2G/3G/4G ...

  • Page 12: Packing List

    3-pin pluggable terminal block with lock for power connector x 1  CD with user guide x 1 Note: If any of the above items is missing or damaged, please contact your Robustel Sales Representative. Optional accessories (can be purchased separately): ...
  • Page 13 Robustel GoRugged R3000 Lite User Guide Ethernet cable x 1   Wall mounting kit x 2  35 mm DIN rail mounting kit x 1  AC/DC power supply adapter x 1 (12 VDC, 1.5 A; EU, US, UK, AU plug optional) ...

  • Page 14: Specifications

    Robustel GoRugged R3000 Lite User Guide 1.3 Specifications Cellular Interface  Standards: GSM/GPRS/EDGE/UMTS/TD-SCDMA/EVDO/HSPA+/LTE  GSM: max. 9.6/2.7 Kbps (DL/UL)  GPRS: max. 86 Kbps (DL & UL), class 10  EDGE: max. 236.8 Kbps (DL & UL), class 12 ...

  • Page 15: Dimensions

    Robustel GoRugged R3000 Lite User Guide  Management: Web, CLI, SNMP v1/v2/v3, SMS, RobustLink  Serial port: TCP client/server, UDP, Modbus RTU/ASCII to Modbus TCP, Virtual COM (COM port redirector)  RobustLink: Centralized M2M management platform  RobustVPN: Cloud VPN Portal Power Supply and Consumption ...

  • Page 16: Selection And Ordering Data

    Robustel GoRugged R3000 Lite User Guide 1.5 Selection and Ordering Data Operating Model No. Description Frequency Range Selection Environment 3G: UMTS 900/2100MHz -40 to 85 °C R3000-L3H HSDPA router HSDPA/HSUPA/HSPA 850/900/1900/2100MHz /5 to 95% RH 2G: GSM/GPRS/EDGE 850/900/1800/1900MHz 3G: UMTS/HSDPA/HSUPA/HSPA 800/850/900/AWS/1900/2100MHz -40 to 85 °C...

  • Page 17: Chapter 2 Installation

    Robustel GoRugged R3000 Lite User Guide Chapter 2 Installation 2.1 LED Indicators Name Color Status Description On, blinking Router is ready Green On, solid Router is booting Router is powered off On, blinking VPN tunnel/PPPoE/DynDNS/GPS is up Green VPN tunnel/PPPoE/DynDNS/GPS is down...

  • Page 18: Pin Assignment

    Robustel GoRugged R3000 Lite User Guide 2.2 PIN Assignment DB9 Female Connector PIN Power Positive PIN Debug RS232 RS485 (2-wire) Terminal block Direction Data+ (A) 485+ Negative R3000 Lite  Device Device  R3000 Lite Device  R3000 Lite DRXD...

  • Page 19: Reset Button

    Robustel GoRugged R3000 Lite User Guide 2.4 Reset Button Reset Button Function Operation Reboot Press the button for at least 5 seconds in operating status After powering up the router, press the RST button by a small non-conductive stick with a...

  • Page 20: Mount The Router

    Robustel GoRugged R3000 Lite User Guide 2.6 Mount the Router R3000 Lite router supports for horizontal surface placement, DIN rail mounting and wall mounting.  Two ways for mounting the router Wall mounting Use 3 pcs of M3*4 countersunk Phillips screws to fix the router on the wall mounting kit, and then use 2 pcs of M3 drywall screws to mount the router associated with the wall mounting kit on the wall.

  • Page 21: Install The Sim Card

    Robustel GoRugged R3000 Lite User Guide 2.7 Install the SIM Card Remove slot cover  Make sure router is powered off. To remove cover, loosen the screws associated with the cover by using a screwdriver and then find the SIM card slot.

  • Page 22: Grounding The Router

    Robustel GoRugged R3000 Lite User Guide 2.9 Grounding the Router Router grounding helps prevent the noise effect due to electromagnetic interference (EMI). Connect the router to the site ground wire by the ground screw before powering on. Note: This product is appropriate to be mounted on a sound grounded device surface, such as a metal panel.

  • Page 23: Chapter 3 Configuration Settings Over Web Browser

    Robustel GoRugged R3000 Lite User Guide Chapter 3 Configuration Settings over Web Browser The router can be configured through web browser including IE 8.0 or above, Chrome and Firefox, etc. And the supported operating systems are: Linux, Mac OS, Windows 98/NT/2000/XP/Me/Vista/7/8, etc. There are various ways to connect to the router, either through an external repeater/hub or to PC directly.
  • Page 24 Robustel GoRugged R3000 Lite User Guide 2. Click Properties in the window of Local Area Connection Status. 3. Choose Internet Protocol Version 4 (TCP/IPv4) and click Properties. RT_UG_R3000 Lite_v.1.4.1 15.11.2016 23 / 135 Confidential...
  • Page 25 Robustel GoRugged R3000 Lite User Guide 4. Two ways for configuring the IP address of PC: Obtain an IP address automatically: Use the following IP address (configured a static IP address manually within the same subnet of R3000 Lite router): 5.

  • Page 26: Logging In The Router

    Robustel GoRugged R3000 Lite User Guide 3.2 Logging in the Router Before configuring your router, you need to know the following default settings. Item Description Username admin Password admin Ethernet 192.168.0.1/255.255.255.0, LAN mode DHCP Server Enabled. Access the router’s web interface On the PC, open a web browser such as Internet Explorer, Google and Firefox etc.

  • Page 27: Control Panel

    Robustel GoRugged R3000 Lite User Guide 3.3 Control Panel This section allows users to save configuration, reboot router, logout and select language. Control Panel Item Description Button Save Click to save the current configuration into router’s flash. After save the current configuration, router needs to be rebooted to make Reboot the modification taking effect.

  • Page 28: Status > System

    Robustel GoRugged R3000 Lite User Guide Note: The steps of how to modify configuration are as below: 1. Modify in one page; 2. Click under this page; 3. Modify in another page; 4. Click under this page; 5. Complete all modification;...
  • Page 29 Robustel GoRugged R3000 Lite User Guide Router Information Item Description Device Model Show the model name of this device Serial Number Show the serial number of this device Device Name Show the device name to distinguish different devices you have installed.
  • Page 30 Robustel GoRugged R3000 Lite User Guide Cellular Information Item Description Current SIM Show the SIM card which the router work with currently: SIM1 or SIM2 Phone No. Show the phone number of the current SIM. SMS Service Center Show the SMS Service Center.

  • Page 31: Status > Network

    Robustel GoRugged R3000 Lite User Guide IMEI/ESN Show the IMEI/ESN number of the radio module. IMSI Show the IMSI number of the current SIM. USB Status Show the current status of USB host. 3.5 Status > Network This section displays the router’s Network status, which include status of Cellular WAN and LAN.

  • Page 32: Status > Route

    Robustel GoRugged R3000 Lite User Guide 3.6 Status > Route This section displays the router’s route table. 3.7 Status > VPN This section displays the router’s VPN status, which includes IPSec, L2TP, PPTP, OpenVPN and GRE. RT_UG_R3000 Lite_v.1.4.1 15.11.2016 31 / 135...

  • Page 33: Status > Services

    Robustel GoRugged R3000 Lite User Guide 3.8 Status > Services This section displays the router’s Services’ status, including VRRP, DynDNS and Serial. 3.9 Status > Channels This section displays the status of router’s channels. RT_UG_R3000 Lite_v.1.4.1 15.11.2016 32 / 135...

  • Page 34: Status > Event/Log

    Robustel GoRugged R3000 Lite User Guide 3.10 Status > Event/Log This section displays the router’s event/log information. You need to enable router to output the log and select the log level first, then you can view the log information here. Also you can click Download System Diagnosing Data to download diagnose data.

  • Page 35: Configuration > Cellular Wan

    Robustel GoRugged R3000 Lite User Guide 3.11 Configuration > Cellular WAN This section allows users to set the Cellular WAN and the related parameters. RT_UG_R3000 Lite_v.1.4.1 15.11.2016 34 / 135 Confidential...
  • Page 36 Robustel GoRugged R3000 Lite User Guide RT_UG_R3000 Lite_v.1.4.1 15.11.2016 35 / 135 Confidential...
  • Page 37 Robustel GoRugged R3000 Lite User Guide Basic @Cellular WAN Cellular Settings Item Description Default There are the possible statuses of cellular SIM card. "Inserted", "Ready", "Need SIM PIN", "Need SIM PUK", "Check SIM error", Status "Input PIN Code error", "Input PUK Code error", "Poor signal",...
  • Page 38 Robustel GoRugged R3000 Lite User Guide Connect On Demand: After selection this option, user could configure Triggered by Serial Data, Triggered by Periodically Connect and Triggered by Time Schedule. Note: If you select several connect on demand polices, router only have to meet one of them to be triggered.
  • Page 39 Robustel GoRugged R3000 Lite User Guide phone Group they are belonged to. Tick this check box to allow router automatically connects to cellular Periodically Connect network with preset interval which you preset in Periodically Connect Enable Interval. Periodically Connect Periodically Connect Interval for Periodically Connect.
  • Page 40 Robustel GoRugged R3000 Lite User Guide (MB) Already used (KB) This tab will show how many data traffic has been used. Switch back main SIM Enable to Switch back Main SIM card after the Initial timeout. Disable card after timeout Initial Timeout(min) Set the initial timeout.
  • Page 41 Robustel GoRugged R3000 Lite User Guide Advanced @Cellular WAN Item Description Default Set the SIM card’s phone number, and it will be showed in Status > System > System > Cellular WAN Information > SIM Phone Number. Phone No. Null In general, you don’t need to set this number because router will read it...
  • Page 42 Robustel GoRugged R3000 Lite User Guide One of the PPP initialization strings. In general, you don’t need to modify Asyncmap Value this value. Use Peer DNS Enable to obtain the DNS server’s address from the ISP. Enable Set the primary DNS server’s address. This item will be unavailable if you...

  • Page 43: Configuration > Ethernet

    Robustel GoRugged R3000 Lite User Guide 3.12 Configuration > Ethernet This section allows users to set the Ethernet LAN parameters of Eth0. Eth0@Ethernet Item Description Default IP Address, Netmask, Set the IP address, Netmask, MTU and Media Type of Eth0. These...
  • Page 44 Robustel GoRugged R3000 Lite User Guide Netmask @ DHCP Define the Netmask which the DHCP clients will obtain from DHCP 255.255.255.0 Server server. Lease Time @ DHCP Define the time which the client can use the IP address which Server(min) obtained from DHCP server.

  • Page 45: Configuration > Serial

    Robustel GoRugged R3000 Lite User Guide 3.13 Configuration > Serial This section allows users to set the serial (RS232/RS485) parameters.  When Select Protocol “Transparent”:  When Select Protocol “Modbus gateway”: RT_UG_R3000 Lite_v.1.4.1 15.11.2016 44 / 135 Confidential...
  • Page 46 Robustel GoRugged R3000 Lite User Guide  When Select Protocol “Transparent Over Rlink”:  When Select Protocol “Modbus Over Rlink”:  When Select Protocol “AT Over COM”:  When Select Protocol “GPS Report”: RS232 @ Serial Item Description Default Select from “300”, “600”, “1200”, “2400”, “4800”, “9600”, “19200”, “38400”,...
  • Page 47 Robustel GoRugged R3000 Lite User Guide Modbus TCP protocol data, and then send to Robustlink, after that Robustlink will forward the data to another destination site. AT Over COM: select to operate router via RS232 COM port. For example, enter AT commands to router via RS232 COM port.
  • Page 48 Robustel GoRugged R3000 Lite User Guide @Transparent The Delimiter process field determines how the data is handled when a delimiter is received. Delimiter Process None: Data in the buffer will be transmitted when the delimiter is received; the Strip @Transparent data also includes the delimiter characters.
  • Page 49 Robustel GoRugged R3000 Lite User Guide Modbus Over Rlink RTU protocol. Modbus ASCⅡ slave: router connects to slave device which works under Modbus ASCⅡprotocol. Enable to display all virtual com of the module inside the router. Generally, Display all com @ router will occupy /dev/ttyUSB0 and /dev/ttyUSB2 for dialing up to GPRS.
  • Page 50 Robustel GoRugged R3000 Lite User Guide  When Select Protocol “Modbus gateway”:  When Select Protocol “Transparent Over Rlink”:  When Select Protocol “Modbus Over Rlink”: RS485 @ Serial Item Description Default Select from “300”, “600”, “1200”, “2400”, “4800”, “9600”, “19200”, “38400”,...
  • Page 51 Robustel GoRugged R3000 Lite User Guide @Transparent Click “Add” button to add multiple server. You need to enter the server’s IP and port, and enable or disable “Send data to serial”. If you disable “Send Multiple Server data to serial”, router will not transmit the data from this server to serial...

  • Page 52: Configuration > Usb

    Robustel GoRugged R3000 Lite User Guide Local Port @ Enter the Local port for Modbus. Modbus gateway Select From “Modbus RTU slave”, “Modbus ASCⅡ slave”, “Modbus RTU master” and “Modbus ASCⅡ master”. Modbus RTU slave: router connects to slave device which works under Modbus RTU protocol.

  • Page 53: Configuration > Nat/Dmz

    Robustel GoRugged R3000 Lite User Guide Item Description Default Enable automatic Click Enable to automatically update the configuration file of R3000 when Disable update of configuration insert the USB storage devices which has R3000’s configuration file. Enable automatic Click Enable to automatically update the firmware of R3000 when insert the...

  • Page 54: Configuration > Firewall

    Robustel GoRugged R3000 Lite User Guide DMZ @ NAT/DMZ Item Description Default DMZ host is a host on the internal network that has all ports exposed, except Null those ports otherwise forwarded. Enable DMZ Select to enable the DMZ function.
  • Page 55 Robustel GoRugged R3000 Lite User Guide If you disable one of tabs: “Remote Access Using HTTP”, “Remote Access Using TELNET”, “Remote Access Using SNMP”, “Remote Access Using SSH2” or “Remote Ping Request”, it will pop up “Add Allow Access List” to allow you to preset specific user to access to WAN interface of R3000.
  • Page 56 Robustel GoRugged R3000 Lite User Guide Filtering @ Firewall Item Description Default Select from “Accept” and “Drop”. Accept: Router will accept all the data traffic except the hosts which were Default Filter Policy added in the drop list. Accept Drop: Router will drop all the data traffic except the hosts which were added in the accept list.

  • Page 57: Configuration > Qos

    Robustel GoRugged R3000 Lite User Guide URL@ Blocking By Block the access according to the URL Address that filled in the blank. Null URL Address Blocking By Keywork Click “Add” to add a Keywork list. Null Keywork@ Blocking Block the access according to the Keywork that filled in the blank.
  • Page 58 Robustel GoRugged R3000 Lite User Guide Item Description Default Enable QoS Click to enable “QoS” function. Disable Downlink Speed Prescribe downlink speed of router. (kbps) Note: Default setting“0” means that there is no limitation of downlink speed. Prescribe uplink speed of router.
  • Page 59 Robustel GoRugged R3000 Lite User Guide Select from “Exempt”, “Premium”, “Express”, “Normal” and “Bulk”. Users (Services) with no other pre-priority set will use this default priority. Exempt: this is the highest priority which guarantees that the minimum global rate of router is 50% of “Downlink Speed”, and the maximum rate can reach to 100% of “Downlink Speed”.
  • Page 60 Robustel GoRugged R3000 Lite User Guide rate of router is 50% of “Downlink Speed”, and the maximum rate can reach to 100% of “Downlink Speed”. Premium: guarantees that the minimum global rate of router is 25% of “Downlink Speed”, and the maximum rate can reach to 100% of “Downlink Speed”.

  • Page 61: Configuration > Ip Routing

    Robustel GoRugged R3000 Lite User Guide 3.18 Configuration > IP Routing This section allows users to set the IP routing parameters. Static Route @ IP Routing Item Description Default Static Route Table Allow users to add, delete or modify static route rules manually.
  • Page 62 Robustel GoRugged R3000 Lite User Guide RIP @ IP Routing Item Description Default RIP (Routing Information Protocol) is a distance-vector routing protocol, which employs the hop count as a routing metric. RIP prevents routing loops by Null implementing a limit on the number of hops allowed in a path from the source to a destination.

  • Page 63: Configuration > Dyndns

    Robustel GoRugged R3000 Lite User Guide OSPF @ IP Routing Item Description Default OSPF (Open Shortest Path First) is a link-state routing protocol for IP networks. OSPF It uses a link state routing algorithm and falls into the group of interior routing Null protocols, operating within a single autonomous system (AS).

  • Page 64: Configuration > Dmvpn

    Robustel GoRugged R3000 Lite User Guide Username Enter the user name the DDNS server provided. Null Password Enter the password the DDNS server provided. Null Force Update Click to the update and use the DynDNS settings. Null DynDNS Status Show current status of DynDNS Null 3.20 Configuration >...
  • Page 65 Robustel GoRugged R3000 Lite User Guide stands for “Router’s extern IP”. ID: Uses custom string as the ID in IKE negotiation. FQDN: Uses an FQDN type as the ID in IKE negotiation. If this option is selected, type a name without any at sign (@) for the local security gateway, e.g., test.robustel.com.

  • Page 66: Configuration > Ipsec

    Robustel GoRugged R3000 Lite User Guide 3.21 Configuration > IPSec This section allows users to set the IPSec parameters. IPSec Basic @ IPSec Item Description Default Tick to enable NAT Traversal for IPSec. This item must be enabled when router...
  • Page 67 Robustel GoRugged R3000 Lite User Guide IPSec Tunnel @ IPSec Item Description Default Click Add to add new IPSec Tunnel Null Enable Enable IPSec Tunnel, the max tunnel account is 3 Null IPSec Gateway Enter the address of remote side IPSec VPN server.
  • Page 68 Robustel GoRugged R3000 Lite User Guide Address Select from “Tunnel” and “Transport”. Tunnel: Commonly used between gateways, or at an end-station to a gateway, the gateway acting as a proxy for the hosts behind it. IPSec Mode Transport: Used between end-stations or between an end-station and a Tunnel gateway, if the gateway is being treated as a host—for example, an...
  • Page 69 Robustel GoRugged R3000 Lite User Guide AES192: Uses the AES algorithm in CBC mode and 192-bit key. AES256: Uses the AES algorithm in CBC mode and 256-bit key. Select from “MD5” and “SHA1”to be used in IKE negotiation. Authentication MD5: Uses HMAC-SHA1.
  • Page 70 Robustel GoRugged R3000 Lite User Guide interval, it sends a DPD hello to the peer. If the local end receives no DPD acknowledgment within the DPD packet retransmission interval, it retransmits the DPD hello. If the local end still receives no DPD...

  • Page 71: Configuration > Robustvpn

    Robustel GoRugged R3000 Lite User Guide Click “Browse” to select the correct Local Public Key file from your PC, and then click “Import” to import it to the router. Local Public Key Null Click “Export” you can export the Local Public Key file from router to your PC.

  • Page 72: Configuration > Open Vpn

    Robustel GoRugged R3000 Lite User Guide 3.23 Configuration > Open VPN This section allows users to set the Open VPN parameters. Client @ Open VPN Item Description Default Enable Enable OpenVPN Client, the max tunnel account is 3 Null Protocol Select from “UDP”...
  • Page 73 Robustel GoRugged R3000 Lite User Guide Select from “tun” and “tap” which are two different kinds of device interface for OpenVPN. Interface The difference between tun and tap device is this: a tun device is a virtual IP point-to-point device and a tap device is a virtual Ethernet device.
  • Page 74 Robustel GoRugged R3000 Lite User Guide Server @ Open VPN Item Description Default Enable OpenVPN Tick to enable OpenVPN server tunnel. Disable Server Tunnel_OpenVPN_ Tunnel name Name the OpenVPN server tunnel. You can enter the IP address of cellular WAN, Ethernet WAN or Listen IP Ethernet LAN.
  • Page 75 Robustel GoRugged R3000 Lite User Guide Select from “tun” and “tap” which are two different kinds of device interface for OpenVPN. Interface The difference between a tun and tap device is this: a tun device is a virtual IP point-to-point device and a tap device is a virtual Ethernet device.
  • Page 76 Robustel GoRugged R3000 Lite User Guide X.509 @ Open VPN Item Description Default Select Cert Type Select the OpenVPN client or server which the certification used for. Null Click “Browse” to select the correct CA file from your PC, and then click “Import”...

  • Page 77: Configuration > Gre

    Robustel GoRugged R3000 Lite User Guide 3.24 Configuration > GRE This section allows users to set the GRE parameters. Item Description Default Click “Add” to add a GRE tunnel. Click to enable GRE (Generic Routing Encapsulation). GRE is a protocol that...

  • Page 78: Configuration > L2Tp

    Robustel GoRugged R3000 Lite User Guide 3.25 Configuration > L2TP This section allows users to set the L2TP parameters. L2TP Client @ L2TP Item Description Default Click “Add” to add a L2TP client. You can add at most 3 L2TP clients.
  • Page 79 Robustel GoRugged R3000 Lite User Guide Password Enter the password which was provided by your L2TP server. Null Select from “Auto”, “PAP”, “CHAP”, “MS-CHAP v1” and “MS-CHAP v2”. You need to select the corresponding authentication method based on the Authentication Disable server’s authentication method.
  • Page 80 Robustel GoRugged R3000 Lite User Guide L2TP Server @ L2TP Item Description Default Enable L2TP Server Tick to enable L2TP server. Disable Username Set the username which will assign to L2TP client. Null Password Set the password which will assign to L2TP client.

  • Page 81: Configuration > Pptp

    Robustel GoRugged R3000 Lite User Guide IP Pool End Set the IP pool end IP address which will assign to the L2TP clients. 10.0.0.100 Show L2TP Server Tick to show the L2TP server advanced setting. Disable Advanced Address/Control Used for PPP initialization. In general, you need to enable it as default.
  • Page 82 Robustel GoRugged R3000 Lite User Guide PPTP Client @ PPTP Item Description Default Click “Add” to add a PPTP client Enable Enable PPTP Client. The max tunnel accounts are 3. Null Disable Disable PPTP Client. Null Remote IP Address Enter your PPTP server’s public IP or domain name.
  • Page 83 Robustel GoRugged R3000 Lite User Guide Set the IP address of the PPTP client. Local IP You can enter the IP which assigned by PPTP server. Null means PPTP client Null will obtain an IP address automatically from PPTP server’s IP pool.
  • Page 84 Robustel GoRugged R3000 Lite User Guide PPTP Server @ PPTP Item Description Default Enable PPTP Server Tick to enable PPTP server. Disable Username Set the username which will assign to PPTP client. Null Password Set the password which will assign to PPTP client.

  • Page 85: Configuration > Modbus Over Tcp

    Robustel GoRugged R3000 Lite User Guide Advanced Address/Control Used for PPP initialization. In general, you need to enable it as default. Enable Compression Protocol Field Used for PPP initialization. In general, you need to enable it as default. Enable Compression One of the PPTP initialization strings.

  • Page 86: Configuration > Modbus Master

    Robustel GoRugged R3000 Lite User Guide 3.28 Configuration > Modbus Master R3000 Lite router could be configured as a Modbus master, and will automatically poll the slave sides and report the collected data to specified server. This section allows users to configure the Modbus Master.

  • Page 87: Configuration > Remote Channels

    Robustel GoRugged R3000 Lite User Guide instructions after the Max Response Time, the instructions read timeout. Time Between The execution of the interval between each instruction. Commands (ms) Read the save site of Modbus’s data. Logging Type Only save when it can’t upload to the server, upload the data after the Null upload channel recovering.

  • Page 88: Configuration > Alarms

    Robustel GoRugged R3000 Lite User Guide the channel, for the alarm and upload platform. Used to indicate a dot in the read into the position of the channel. For Decimal Place example: read the channel value is 1234, and a Decimal Place is equal to 2, then the actual value of 12.34.

  • Page 89: Configuration > Smtp

    Robustel GoRugged R3000 Lite User Guide 3.31 Configuration > SMTP Simple Mail Transfer Protocol (SMTP) is an Internet standard for electronic mail (email) transmission. This section allows users to set the SMTP parameters. SMTP Item Description Default SMTP Enable Tick to enable SMTP feature...

  • Page 90: Configuration > Snmp

    Robustel GoRugged R3000 Lite User Guide 3.32 Configuration > SNMP This section allows users to set the SNMP parameters. Basic @ SNMP Item Description Default Port UDP port for sending and receiving SNMP requests. Agent Mode Select the correct agent mode.
  • Page 91 Robustel GoRugged R3000 Lite User Guide VACM @ SNMP Item Description Default Readwrite Select the access rights from “Readonly” and “ReadWrite”. Readonly Network Define the network from which is allowed to access. E.g. 172.16.0.0. Null Community Enter the community name.

  • Page 92: Configuration > Vrrp

    Robustel GoRugged R3000 Lite User Guide 3.33 Configuration > VRRP This section allows users to set the VRRP parameters. VRRP Item Description Default Tick to enable VRRP protocol. VRRP (Virtual Router Redundancy Protocol) is an Internet protocol that provides a way to have one or more backup routers...

  • Page 93: Configuration > Phone Book

    Robustel GoRugged R3000 Lite User Guide remotely. Protocol Select from “TCP server” or “UDP” You can enter the IP address of cellular WAN, Ethernet WAN or Ethernet LAN. Local IP 0.0.0.0 Null stands for all these three IP addresses. Local Port Enter the local TCP or UDP listening port.

  • Page 94: Configuration > Sms

    Robustel GoRugged R3000 Lite User Guide Phone Group Group Name Set the Group Name. Null Phone List Show the phone list in the Group. Null Add or remove the Click right arrow to add the phone no.to this group; Click left arrow to remove phone no.to/from...

  • Page 95: Configuration > Reboot

    Robustel GoRugged R3000 Lite User Guide Item Description Default Send SMS on power Enable to send SMS to specific user after router was powered up. Disable Send SMS on PPP Enable to send SMS to specific user when router PPP up.

  • Page 96: Configuration > Portal

    Robustel GoRugged R3000 Lite User Guide Time @ Reboot Item Description Default Enable daily reboot, you should follow ahh:mm,24h time frame, or the data Enable(ahh:mm,24h) Disable will be invalid. Reboot Time1 Specify time1 when you need router reboot. Null Reboot Time2 Specify time2 when you need router reboot.
  • Page 97 Robustel GoRugged R3000 Lite User Guide Robustlink @ Portal Item Description Default Server address Enter IP address of RobustLink. Null Port Enter port number of RobustLink. 1883 Enter the password preset in RobustLink. Password Null Note: The passwords set in R3000 and RobustLink need to be the same.

  • Page 98: Configuration > Syslog

    Robustel GoRugged R3000 Lite User Guide 3.39 Configuration > Syslog This section allows users to set the syslog parameters. Syslog Item Description Default Select the save position from “None”, “Flash” and “SD”. “None” means syslog Save Position NONE is only saved in RAM, and will be cleared after reboot.

  • Page 99: Configuration > Usr Led

    Robustel GoRugged R3000 Lite User Guide Event Item Description Default Click to enable Event feature. This feature is used to report R3000 Lite’s main running event to SNMP-TRAP or RobustLink. There are numbers of Event code you can select, such as Enable Event “BOOT-UP”, “3G-UP”, “3G-DOWN”, etc.
  • Page 100 Robustel GoRugged R3000 Lite User Guide Radius Item Description Default Server Address Radius server address (domain or IP) Null Server Port Radius server port 1812 Password The password to access the server Null Tacacs+ Item Description Default Server Address Tacacs+ server address (domain or IP)
  • Page 101 Robustel GoRugged R3000 Lite User Guide Radius Item Description Default There are “Telnet”, “Ssh” and “Web”. Services When set the Radius, Tacacs+ and local in the meanwhile, the priority order to follow: 1>2>3 Select from “Null”, “Local”, “Radius”, “Tacacs+” and “Ldap”.

  • Page 102: Configuration > Ftp

    Robustel GoRugged R3000 Lite User Guide 3.43 Configuration > FTP Item Description Default FTP Client Enable click to enable FTP client Null Server Address Enter FTP server’s IP address or domain name. Null Server port Enter FTP server’s port Username Enter the username which can be used to access FTP server.

  • Page 103: Administration > Profile

    Robustel GoRugged R3000 Lite User Guide CSV File Include List All the local CSV files will display in this list. Channel Name Modbus remote channel name Alias Set the file’s alias. Enable Select the CSV files which you want to send to the FTP server.

  • Page 104: Administration > Tools

    Robustel GoRugged R3000 Lite User Guide Language Router system supports multiple languages, and imports via language pack. Configuration Restore to Factory Click the button of “Restore to Factory Default Settings” to restore the router Null Default Settings to factory default setting.
  • Page 105 Robustel GoRugged R3000 Lite User Guide AT Debug @ Tools Item Description Default Send AT Commands Enter the AT commands which you need to send to cellular module in this box. Null Send Click this button to send the AT commands.
  • Page 106 Robustel GoRugged R3000 Lite User Guide Traceroute @ Tools Item Description Default Trace Address Enter the trace destination IP address or domain name. Null Specify the max trace hops. Router will stop tracing if the trace hops has met Trace Hops max value no matter the destination has been reached or not.

  • Page 107: Administration > Clock

    Robustel GoRugged R3000 Lite User Guide Test @ Tools Item Description Default Click “Enable” to select the hardware component whose status you want to Enable Enable check. Select from “USB Test”, “Flash Test”, “Memory Test”, “Ethernet Test”, “SIM1 Description Test”, “SIM2 Test” and “Module Test”.

  • Page 108: Administration > Web Server

    Robustel GoRugged R3000 Lite User Guide Clock Item Description Default Time zone Select your local time zone. UTC +08:00 Expert Setting Support expert mode of Daylight Saving Time. Null Primary NTP Server Enter primary NTP Server’s IP address or domain name.

  • Page 109: Administration > User Management

    Robustel GoRugged R3000 Lite User Guide Basic @ Web Server Item Description Default Enter the HTTP port number you want to change in R3000’s Web Server. On a Web server, port 80 is the port that the server "listens to" or expects to HTTP Port receive from a Web client.

  • Page 110: Administration > Update Firmware

    Robustel GoRugged R3000 Lite User Guide Super @ User Management Item Description Default One router has only one super user account. Under this account, user has the Super Admin highest authority include modify and add management user accounts. User Management Set Username and Password.
  • Page 111 Robustel GoRugged R3000 Lite User Guide Update Item Description Default Firmware Version Show the current firmware version. Null Show the old firmware version of the router. Firmware Old Version Click “Apply” button to fall back to the old version, after updating successfully, you need to reboot router to take effect.

  • Page 112: Chapter 4 Configuration Examples

    Robustel GoRugged R3000 Lite User Guide Chapter 4 Configuration Examples 4.1 Interface DB9 Female Connector Debug RS232 RS485 (2-wire) Direction Data+ (A) R3000 Lite  Device Device  R3000 Lite Device  R3000 Lite DRXS Data- (B) Device  R3000 Lite R3000 Lite ...

  • Page 113: Rs232

    Robustel GoRugged R3000 Lite User Guide 4.1.2 RS232 R3000 Lite supports one RS232 for serial data communication. Please refer to the connection diagram at the right site. 4.1.3 RS485 R3000 Lite supports one RS485 for serial data communication. Please refer to the connection diagram at the right site.

  • Page 114: Cellular

    Robustel GoRugged R3000 Lite User Guide 4.2 Cellular 4.2.1 Cellular Dial-Up This section shows users how to configure the parameters of Cellular Dial-up within two configuration methods: “Always Online” and “Connect on Demand”. Always Online Configuration > Cellular WAN > Basic The modifications will take effect after click “Apply”...
  • Page 115 Robustel GoRugged R3000 Lite User Guide Connect on Demand Configuration > Cellular WAN > Basic Select the trigger policy you need. Note If you select multiple trigger policies, the router will be triggered under anyone of them. RT_UG_R3000 Lite_v.1.4.1 15.11.2016...

  • Page 116: Sms Remote Status Reading

    Robustel GoRugged R3000 Lite User Guide 4.2.2 SMS Remote Status Reading R3000 Lite supports remote control via SMS. Users can use following commands to get the status of R3000 Lite, cannot set new parameters of R3000 Lite at present. An SMS command has following structure: Password:cmd1,a,b,c;cmd2,d,e,f;cmd3,g,h,i;...;cmdn,j,k,n...

  • Page 117: Network

    Robustel GoRugged R3000 Lite User Guide 2 - SIM_2 0011 Get system status 0012 Upload and download ftp xml cmd, function Number, functionNumber: server, address 1 - upload datalog.log 2 - download config.xml Set Commands 1000 Set SIM card (APN, username,...

  • Page 118: L2Tp

    Robustel GoRugged R3000 Lite User Guide Configuration > NAT/DMZ > Port Forwarding Explanations for above diagram: If there are two IP addresses 58.1.1.1 and 59.1.1.1 for the External Devices, that the result will be different from the test when the NAT is working at R3000.
  • Page 119 Robustel GoRugged R3000 Lite User Guide L2TP_SERVER: Configuration > L2TP > L2TP Server Tick “Enable L2TP Server”, and fill in the blank textbox The modification will take effect after Apply > Save > Reboot. Note The following diagrams with red color numbers mean these are the matches between server and client, and with the blue color number means it must be set locally for the tunnel.

  • Page 120: Pptp

    Robustel GoRugged R3000 Lite User Guide The modification will take effect after Apply > Save > Reboot. 4.3.3 PPTP Note The following diagrams with red color numbers mean these are the matches between server and client, and with the blue color number means it must be set locally for the tunnel.
  • Page 121 Robustel GoRugged R3000 Lite User Guide The modification will take effect after Apply > Save > Reboot. PPTP_CLIENT: Configuration > PPTP > PPTP Client Click “Add” button, and fill in the blank textbox The modification will take effect after Apply > Save > Reboot.

  • Page 122: Ipsec Vpn

    Robustel GoRugged R3000 Lite User Guide 4.3.4 IPSEC VPN Note The following diagrams with red color numbers mean these are the matches between server and client, and with the blue color number means it must be set locally for the tunnel.
  • Page 123 Robustel GoRugged R3000 Lite User Guide Note Polices 1,4,6,7 are default for Cisco router and do not display at the CMD IPsecVPN_CLIENT: Configuration > IPSec > IPSec Basic Then click “Apply”. Configuration > IPSec > IPSec Tunnel Tick “Enable IPSec Tunnel1”...

  • Page 124: Openvpn

    Robustel GoRugged R3000 Lite User Guide The modification will take effect after Apply > Save > Reboot. 4.3.5 OPENVPN Note: The following diagrams with red color numbers mean these are the matches between server and client, and with the blue color number means it must be set locally for the tunnel.
  • Page 125 Robustel GoRugged R3000 Lite User Guide The modifications will take effect after click Apply > Save > Reboot. OPENVPN_CLIENT: Configuration > OpenVPN > Client Tick “Enable OpenVPN Client1”, and fill in the blank textbox RT_UG_R3000 Lite_v.1.4.1 15.11.2016 124 / 135...
  • Page 126 Robustel GoRugged R3000 Lite User Guide The modification will take effect after Apply > Save > Reboot. RT_UG_R3000 Lite_v.1.4.1 15.11.2016 125 / 135 Confidential...

  • Page 127: Chapter 5 Introductions For Cli

    Robustel GoRugged R3000 Lite User Guide Chapter 5 Introductions for CLI 5.1 What’s CLI and Hierarchy Level Mode The R3000 Lite command-line interface (CLI) is a software interface providing another way to set the parameters of equipment from the console or through a telnet network connection. There are four different CLI hierarchy level modes which have different access rights: User exec mode—The command prompt “>”...
  • Page 128 Robustel GoRugged R3000 Lite User Guide R3000> enable Password: ***** //type “admin” R3000# ? //check what commands can be used in Privileged exec mode debug Debug configure information enable Turn on privileged commands exit Exit from current mode export Export file using tftp...

  • Page 129: How To Configure The Cli

    Robustel GoRugged R3000 Lite User Guide R3000(config)# interface Ethernet 0 //check what commands can be used in interface mode R3000(config-e0)# ? exit Exit from current mode Exit to Normal mode Set the IP address of an interface Set the IP address of an interface 5.2 How to Configure the CLI...
  • Page 130 Robustel GoRugged R3000 Lite User Guide R3000# R3000# tftp 172.16.3.3 get rootfs R3k.1.01.01-sub-131211.01.fs Tftp transfering tftp succeeded!downloaded R3000# write //save current configuration Building configuration... R3000#reload !Reboot the system?'yes'or 'no':yes //reload to take effect Example 3: Set IP address for Eth0 R3000>...
  • Page 131 Robustel GoRugged R3000 Lite User Guide 2. Custom 3. china-mobile ->please select mode(1-3)[1]: ->dial out using numbers[]: PIN mode: 1. input only 2. PIN locked 3. PIN unlocked ->please select mode(1-3)[1]: ->pin code[]: ->PUK[]: connection Mode: 1. Always online 2. Connect on demand ->please select mode(1-2)[1]:...

  • Page 132: Commands Reference

    Robustel GoRugged R3000 Lite User Guide 1. show SIM_1 parameters 2. show SIM_2 parameters ->please select mode(1-2)[1]: SIM 1 parameters: network provider : Auto dial numbers pin code : NULL connection Mode : Always online redial interval : 30 seconds...
  • Page 133 Robustel GoRugged R3000 Lite User Guide Syslog syslog Export log information to tftp server Load Load default Restores default values Write Write Save current configuration parameters Tftp IP-address get {cfg|rootfs} tftp Import configuration file or update firmware via tftp file-name...
  • Page 134 Robustel GoRugged R3000 Lite User Guide Glossary Abbreviations Description Alternating Current Access Point Name of GPRS Service Provider Network ASCII American Standard Code for Information Interchange Conformité Européene (European Conformity) CHAP Challenge Handshake Authentication Protocol Command Line Interface for batch scripting...
  • Page 135 Robustel GoRugged R3000 Lite User Guide kbps kbits per second L2TP Layer 2 Tunneling Protocol local area network Light Emitting Diode Machine to Machine Maximum Minimum Mobile Originated Mobile Station Mobile Terminated OpenVPN Open Virtual Private Network Password Authentication Protocol...
  • Page 136 Robustel GoRugged R3000 Lite User Guide VLAN Virtual Local Area Network Virtual Private Network VSWR Voltage Stationary Wave Ratio Wide Area Network RT_UG_R3000 Lite_v.1.4.1 15.11.2016 135 / 135 Confidential...

Table of Contents