Robustel R3000 Lite User Manual
  1. Manuals
  2. Brands
  3. Robustel Manuals
  4. Network Router
  5. GoRugged R3000 Lite
  6. User manual

Robustel R3000 Lite User Manual

Industrial dual sim cellular vpn router
Hide thumbs Also See for R3000 Lite:
Table of Contents

Advertisement

Quick Links

See also: User Manual
User Guide
User Guide
R3000 Lite
R3000 Lite
Industrial Dual SIM Cellular VPN Router
Industrial Dual SIM Cellular VPN Router
1 Eth + 1 RS-232 + 1 RS-485 + 1 USB Host
1 Eth + 1 RS-232 + 1 RS-485 + 1 USB Host
Guangzhou Robustel Technologies Co., Ltd
www.robustel.com
Guangzhou Robustel Technologies Co., Ltd.
www.robustel.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R3000 Lite and is the answer not in the manual?

Questions and answers

Related Manuals for Robustel R3000 Lite

Summary of Contents for Robustel R3000 Lite

  • Page 1 Industrial Dual SIM Cellular VPN Router 1 Eth + 1 RS-232 + 1 RS-485 + 1 USB Host 1 Eth + 1 RS-232 + 1 RS-485 + 1 USB Host Guangzhou Robustel Technologies Co., Ltd www.robustel.com Guangzhou Robustel Technologies Co., Ltd.
  • Page 2 The contents of this document are subject to change without notice due to continued progress in methodology, design and manufacturing. Robustel shall have no liability for any error or damage of any kind resulting from the use of this document.
  • Page 3 Robustel accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the router, or for failure of the router to transmit or receive such data.
  • Page 4 Robustel R3000 Lite User Guide Protecting Your Router To ensure error-free usage, please install and operate your router with care. Do remember the following: Do not expose the router to extreme conditions such as high humidity / rain, high temperature, direct sunlight, ...
  • Page 5 Robustel R3000 Lite User Guide Regulatory and Type Approval Information Table 1: Directives 2011/65/EC Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and...
  • Page 6 Robustel R3000 Lite User Guide Document History Updates between document versions are cumulative. Therefore, the latest document version contains all updates made to previous versions. Date Firmware Version Doc Version Change Description 24 March, 2017 2.9.1 v.3.0.0 Initial release 19 May, 2017 3.0.0...

  • Page 7: Table Of Contents

    Robustel R3000 Lite User Guide Contents Chapter 1 Product Concept ..........................8 Key Features ............................... 8 Package Contents ............................9 Specifications ............................11 Dimensions ............................... 13 Ordering Information ..........................13 Chapter 2 Hardware Installation ........................14 LED Indicators ............................14 PIN Assignment ............................
  • Page 8 Robustel R3000 Lite User Guide 3.26 Services > Advanced ..........................78 3.27 System > Debug ............................79 3.28 System > Update ............................80 3.29 System > APP Center ..........................80 3.30 System > Tools ............................82 3.31 System > Profile ............................84 3.32...

  • Page 9: Chapter 1 Product Concept

    Chapter 1 Product Concept 1.1 Key Features The Robustel Industrial Dual SIM Cellular VPN Router (R3000 Lite) is a rugged cellular router offering state-of-the-art mobile connectivity for machine to machine (M2M) applications. R3000 Lite is a powerful router developed from RobustOS, a Robustel self-developed and Linux-based operating system which is designed to be used in Robustel hardware routers.

  • Page 10: Package Contents

    1 x 3-pin pluggable terminal block for power supply  1 x Quick Start Guide with download link of other documents or tools *If any of the above items is missing or damaged, please contact your Robustel sales representative. Optional accessories (sold separately): ...
  • Page 11 Robustel R3000 Lite User Guide  Wall mounting kit  35 mm DIN rail mounting kit  Ethernet cable  AC/DC power adapter (12V DC, 1.5 A; EU/US/UK/AU plug optional)  Terminal block with a DB9 male connector for serial port connection RT_UG_R3000 Lite_v.3.0.1...

  • Page 12: Specifications

    Robustel R3000 Lite User Guide 1.3 Specifications Cellular Interface Number of ports: 2 (MAIN + AUX)  Connector: SMA, female  SIM: 2 (3.0 V & 1.8 V)  Standards: GSM/GPRS/EDGE/WCDMA/TD-SCDMA/CDMA (CDMA 1X/EVDO)/HSDPA/HSUPA/HSPA+/  DC-HSPA+/FDD LTE/TDD LTE GSM: max DL/UL = 9.6/2.7 Kbps GPRS: max DL/UL = 86 Kbps EDGE: max DL/UL = 236.8 Kbps...
  • Page 13  App Center Available apps for RobustOS: L2TP, PPTP, DMVPN, RobustVPN, DDNS, VRRP, QoS, SNMP, Language, RobustLink  *Request on demand. For more APPs please visit www.robustel.com. Power Supply and Consumption Connector: 3.5 mm DC Jack socket  Input voltage: 9 to 36V DC ...

  • Page 14: Dimensions

    -40 to 75°C -40 to 75°C Environment 5 to 95% RH 5 to 95% RH 5 to 95% RH *For more information about 4G frequency bands in different countries, please contact your Robustel sales representative. RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 13/109 Confidential...

  • Page 15: Chapter 2 Hardware Installation

    Robustel R3000 Lite User Guide Chapter 2 Hardware Installation 2.1 LED Indicators The R3000 Lite has been designed to be placed on a desktop. Below is the top view of the R3000 Lite. Name Color Status Description Green On, fast blinking...

  • Page 16: Pin Assignment

    Note: You can choose the display type of USR LED. For more details, please refer to 3.26 Service > Advanced. 2.2 PIN Assignment The R3000 Lite has been designed to be placed on a desktop. Below is the bottom view of the R3000 Lite. DB9 female connector...

  • Page 17: Usb Interface

    Robustel R3000 Lite User Guide 2.3 USB Interface Function Operation Firmware USB interface is used for batch firmware upgrading, but cannot be used for sending or receiving upgrade data from slave devices which connected to it. You can insert a USB storage device into the router’s USB interface, such as a U disk or a hard disk.

  • Page 18: Ethernet Port

    Robustel R3000 Lite User Guide 2.5 Ethernet Port Ethernet Port R3000 Lite Router has one Ethernet port with two LED indicators. The yellow one is link indicator and the green one is speed indicator. For details about status, see the table below. Indicator...

  • Page 19: Attach External Antenna (Sma Type)

    Robustel R3000 Lite User Guide To remove slot cover, loosen the screws associated with the cover by using a screwdriver and then find the SIM card slot. To insert SIM card, press the card with finger until you hear a click and then tighten the screws associated with the cover by using a screwdriver.

  • Page 20: Mount The Router

    Robustel R3000 Lite User Guide 2.8 Mount the Router The router can be placed on a desktop or mounted to a wall or a 35 mm DIN rail. Two methods for mounting the router Wall mounting Use 3 pcs of M3*4 flat head Phillips screws to fix the wall mounting kit to the router, and then use 2 pcs of M3 drywall screws to mount the router associated with the wall mounting kit on the wall.

  • Page 21: Connect The Router To A Computer

    Robustel R3000 Lite User Guide 2.9 Connect the Router to a Computer Connect an Ethernet cable to the port marked ETH at the bottom of the R3000 Lite, and connect the other end of the cable to your computer. 2.10 Power Supply R3000 Lite router supports reverse polarity protection, but always refers to the figure above to connect the power adapter correctly.

  • Page 22: Chapter 3 Initial Configuration

    Robustel R3000 Lite User Guide Chapter 3 Initial Configuration The router can be configured through your web browser that including IE 8.0 or above, Chrome and Firefox, etc. A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me/Vista/7/8, etc.
  • Page 23 Robustel R3000 Lite User Guide Click Properties in the window of Local Area Connection Status. Choose Internet Protocol Version 4 (TCP/IPv4) and click Properties. RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 22/109 Confidential...
  • Page 24 Robustel R3000 Lite User Guide Two ways for configuring the IP address of PC. Obtain an IP address automatically: Use the following IP address: (Configured a static IP address manually within the same subnet of the router) Click OK to finish the configuration.

  • Page 25: Factory Default Settings

    Robustel R3000 Lite User Guide 3.2 Factory Default Settings Before configuring your router, you need to know the following default settings. Item Description Username admin Password admin 192.168.0.1/255.255.255.0, LAN mode DHCP Server Enabled 3.3 Log in the Router To log in to the management page and view the configuration status of your router, please follow the steps below.

  • Page 26: Control Panel

    Robustel R3000 Lite User Guide 3.4 Control Panel After logging in, the home page of the R3000 Lite Router’s web interface is displayed, for example. Using the original password to log in the router, the page will pop up the following tab It is strongly recommended for security purposes that you change the default username and/or password.

  • Page 27: Status

    Robustel R3000 Lite User Guide Note: The steps of how to modify configuration are as bellow: Modify in one page; Click under this page; Modify in another page; Click under this page; Complete all modification; Click 3.5 Status This page allows you to view the System Information, Internet Status and LAN Status of your router.

  • Page 28: Internet Status

    Robustel R3000 Lite User Guide Internet Status Internet Status Item Description Active Link Show the current active link. Uptime Show the current amount of time the link has been connected. IP Address Show the IP address of current link. Gateway Show the gateway address of the current link.

  • Page 29: Interface > Link Manager

    Warm Backup: The inactive link is online on standby  Load Balancing: Use two links simultaneously Note: R3000 Lite supports only the cold backup mode. Revert Interval Specify the number of minutes that elapses before the primary link is checked if a backup link is being used in cold backup mode. 0 means disable checking.
  • Page 30 Robustel R3000 Lite User Guide Click on the right-most of WWAN1/WWAN2 to enter the configuration window. WWAN1/WWAN2 The window is displayed as below when enabling the “Automatic APN Selection” option. The window is displayed as below when disabling the “Automatic APN Selection” option.
  • Page 31 Robustel R3000 Lite User Guide Link Settings (WWAN) Item Description Default General Settings Index Indicate the ordinal of the list. Type Show the type of the link. WWAN1 Description Enter a description for this link. Null WWAN Settings Automatic APN Click the toggle button to enable/disable the “Automatic APN Selection”...
  • Page 32 Robustel R3000 Lite User Guide Link Settings (WWAN) Item Description Default Data Allowance Set the monthly data traffic limitation. The system will record the data traffic statistics when data traffic limitation (MiB) is specified. The traffic record will be displayed in Interface > Link Manager > Status > WWAN Data Usage Statistics.
  • Page 33 Robustel R3000 Lite User Guide Click the right-most button to select the connection status of the current link. Click the row of the link, and it will show the details information of the current link connection under the row. Click the button to clear SIM1 or SIM2 monthly data traffic usage statistics.

  • Page 34: Interface > Lan

    3.7 Interface > LAN This section allows you to set the related parameters for LAN port. There is one LAN port on R3000 Lite Router, which is ETH. The default settings of ETH is lan0 and its default IP is 192.168.0.1/255.255.255.0.
  • Page 35 Robustel R3000 Lite User Guide The window is displayed as below when choosing “Relay” as the mode. Item Description Default DHCP Settings Enable Click the toggle button to enable/disable the DHCP function. Mode Select from “Server” or “Relay”. Server ...
  • Page 36 Robustel R3000 Lite User Guide Item Description Default Primary DNS Define the primary DNS server assigned by the DHCP server to the Null clients. Secondary DNS Define the secondary DNS server assigned by the DHCP server to the Null clients.
  • Page 37 Robustel R3000 Lite User Guide VLAN Trunk Click to add a VLAN. The maximum count is 8. VLAN Settings Item Description Default Index Indicate the ordinal of the list. Enable Click the toggle button to enable/disable this VLAN. Enable to make router can encapsulate and de-encapsulate the VLAN tag.
  • Page 38 Robustel R3000 Lite User Guide Status This section allows you to view the status of LAN connection. RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 37/109 Confidential...

  • Page 39: Interface > Ethernet

    3.8 Interface > Ethernet This section allows you to set the related parameters for Ethernet. There is one Ethernet port on R3000 Lite Router, which is ETH. The default settings of ETH is lan0 and its default IP is 192.168.0.1/255.255.255.0.

  • Page 40: Interface > Cellular

    3.9 Interface > Cellular This section allows you to set the related parameters of Cellular. The R3000 Lite Router has two SIM card slots, but do not support two SIM cards online simultaneously due to its single-module design. If insert single SIM card at the first time, SIM1 slot and SIM2 slots are available.
  • Page 41 Robustel R3000 Lite User Guide The window is displayed as below when choosing “Auto” as the network type. The window is displayed as below when choosing “Specify” as the band select type. Cellular Item Description Default General Settings RT_UG_R3000 Lite_v.3.0.1...
  • Page 42 Robustel R3000 Lite User Guide Cellular Item Description Default Index Indicate the ordinal of the list. SIM Card Show the currently editing SIM card. SIM1 Phone Number Enter the phone number of the SIM card. Null PIN Code Enter a 4-8 characters PIN code used for unlocking the SIM.
  • Page 43 Robustel R3000 Lite User Guide Click the row of status, the details status information will be displayed under the row. Status Item Description Index Indicate the ordinal of the list. Modem Status Show the status of the radio module. Modem Model Show the model of the radio module.

  • Page 44: Interface > Usb

    Robustel R3000 Lite User Guide Status Item Description IMEI Show the IMEI (International Mobile Equipment Identity) number of the radio module. Firmware Version Show the current firmware version of the radio module. This page allows you to check the AT Debug.

  • Page 45: Interface > Serial Port

    3.11 Interface > Serial Port This section allows you to set the serial port parameters. R3000 Lite Router supports one RS-232 and one RS-485 across a DB9 connector. Serial port provides a way to transfer serial data to IP data, or vice versa, and transmit these data via wired or wireless network to achieve data transparent transmission.
  • Page 46 Robustel R3000 Lite User Guide Serial Port Item Description Default Serial Port Application Settings Index Indicate the ordinal of the list. Port Show the current serial’s name, read only. COM1 Enable Click the toggle button to enable/disable this serial port. When the status is OFF, the serial port is not available.
  • Page 47 Robustel R3000 Lite User Guide The window is displayed as below when choosing “Transparent” as the application mode and “Robustlink” as the protocol.  The window is displayed as below when choosing “Modbus RTU Gateway” as the application mode and “TCP Client”...
  • Page 48 UDP: Router works as UDP client  Robustlink: Router will automatically upload the serial data to Robustlink platform under the Robustlink protocol. Robustlink is a management platform from Robustel. This function only available when Router is connects to Robustlink Server Address...

  • Page 49: Network > Route

    Robustel R3000 Lite User Guide 3.12 Network > Route This section allows you to set the static route. Static route is a form of routing that occurs when a router uses a manually-configured routing entry, rather than information from a dynamic routing traffic. Route Information Protocol (RIP) is widely used in small network with stable use rate.

  • Page 50: Network > Firewall

    Robustel R3000 Lite User Guide Status This window allows you to view the status of route. 3.13 Network > Firewall This section allows you to set the firewall and its related parameters, including Filtering, Port Mapping and DMZ. Filtering The filtering rules can be used to either accept or block certain users or ports from accessing your router.
  • Page 51 Robustel R3000 Lite User Guide Filtering Item Description Default Default Filtering Policy Select from “Accept” or “Drop”. Cannot be changed when filtering Accept rules table is not empty.  Accept: Router will accept all the connecting requests except the hosts which fit the drop filter list ...

  • Page 52: Port Mapping

    Robustel R3000 Lite User Guide Filtering Rules Item Description Default Index Indicate the ordinal of the list. Description Enter a description for this filtering rule. Null Source Address Specify an access originator and enter its source address. Null Source Port Specify an access originator and enter its source port.

  • Page 53: Network > Ip Passthrough

    Robustel R3000 Lite User Guide Port Mapping Rules Item Description Default Remote IP Specify the host or network which can access the local IP address. Empty Null means unlimited, e.g. 10.10.10.10/255.255.255.255 or 192.168.1.0/24 Internet Port Enter the internet port of router which can be accessed by other hosts Null from internet.

  • Page 54: Vpn > Ipsec

    Robustel R3000 Lite User Guide 3.15 VPN > IPsec This section allows you to set the IPsec and the related parameters. Internet Protocol Security (IPsec) is a protocol suite for secure Internet Protocol (IP) communications that works by authenticating and encrypting each IP packet of a communication session.
  • Page 55 Robustel R3000 Lite User Guide Click to add tunnel settings. The maximum count is 3. General Settings @ Tunnel Item Description Default Index Indicate the ordinal of the list. Enable Click the toggle button to enable/disable this IPsec tunnel. Description Enter a description for this IPsec tunnel.
  • Page 56 Robustel R3000 Lite User Guide The window is displayed as below when choosing “PSK” as the authentication type. The window is displayed as below when choosing “CA” as the authentication type. The window is displayed as below when choosing “xAuth PSK” as the authentication type.
  • Page 57 Robustel R3000 Lite User Guide The window is displayed as below when choosing “xAuth CA” as the authentication type. IKE Settings Item Description Default Negotiation Mode Select from “Main” and “Aggressive” for the IKE negotiation mode in phase 1. Main If the IP address of one end of an IPsec tunnel is obtained dynamically, the IKE negotiation mode must be aggressive.
  • Page 58 Robustel R3000 Lite User Guide IKE Settings Item Description Default Remote ID Type Select from “Default”, “FQDN” and “User FQDN” for IKE negotiation. Default  Default: Use an IP address as the ID in IKE negotiation  FQDN: Use an FQDN type as the ID in IKE negotiation. If this option is selected, type a name without any at sign (@) for the local security gateway, e.g., test.robustel.com.
  • Page 59 Robustel R3000 Lite User Guide If choose AH as protocol, the window of SA Settings is displayed as below. SA Settings Item Description Default Encrypt Algorithm Select from “3DES”, “AES128” or “AES256” when you select “ESP” in 3DES “Protocol”. Higher security means more complex implementation and lower speed.
  • Page 60 Robustel R3000 Lite User Guide SA Settings Item Description Default acknowledgment within the DPD packet retransmission interval, it retransmits the DPD hello. If the local end still receives no DPD acknowledgment after having made the maximum number of retransmission attempts, it considers the peer already dead, and clears the IKE SA and the IPsec SAs based on the IKE SA.

  • Page 61: Vpn > Openvpn

    Robustel R3000 Lite User Guide x509 Item Description Default Index Indicate the ordinal of the list. Filename Show the imported certificate’s name. Null File Size Show the size of the certificate file. Null Last Modification Show the timestamp of that the last time to modify the certificate file.
  • Page 62 Robustel R3000 Lite User Guide The window is displayed as below when choosing “Preshared” as the authentication type. RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 61/109 Confidential...
  • Page 63 Robustel R3000 Lite User Guide The window is displayed as below when choosing “Password” as the authentication type. RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 62/109 Confidential...
  • Page 64 Robustel R3000 Lite User Guide The window is displayed as below when choosing “X509CA” as the authentication type. RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 63/109 Confidential...
  • Page 65 Robustel R3000 Lite User Guide The window is displayed as below when choosing “X509CA Password” as the authentication type. General Settings @ OpenVPN Item Description Default Index Indicate the ordinal of the list. Enable Click the toggle button to enable/disable this OpenVPN tunnel.
  • Page 66 Robustel R3000 Lite User Guide General Settings @ OpenVPN Item Description Default Authentication Type Select from “None”, “Preshared”, “Password”, “X509CA” and “X509CA None Password”. “None” and “Preshared” authentication type are only working with p2p mode. Username Enter the username used for “Password” or “X509CA Password”...
  • Page 67 Robustel R3000 Lite User Guide Advanced Settings @ OpenVPN Item Description Default Enable HMAC Firewall Click the toggle button to enable/disable this option. Add an additional layer of HMAC authentication on top of the TLS control channel to protect against DoS attacks.

  • Page 68: Vpn > Gre

    Robustel R3000 Lite User Guide @crl.pem @client.p12 Certificate Files Index Indicate the ordinal of the list. Filename Show the imported certificate’s name. Null File Size Show the size of the certificate file. Null Last Modification Show the timestamp of that the last time to modify the certificate file.

  • Page 69: Services > Syslog

    Robustel R3000 Lite User Guide Local Virtual IP Address Set the local virtual IP address of the GRE tunnel. Null Local Virtual Netmask Set the local virtual Netmask of the GRE tunnel. Null Remote Virtual IP Address Set the remote virtual IP Address of the GRE tunnel.

  • Page 70: Services > Event

    Robustel R3000 Lite User Guide Syslog Settings Item Description Default Enable Click the toggle button to enable/disable the Syslog settings option. Syslog Level Select from “Debug”, “Info”, “Notice”, “Warning” or “Error”, which from low to Notice high. The lower level will output more syslog in details.
  • Page 71 Robustel R3000 Lite User Guide Click button to add an Event parameters. RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 70/109 Confidential...
  • Page 72 Robustel R3000 Lite User Guide General Settings @ Notification Item Description Default Index Indicate the ordinal of the list. Description Enter a description for this group. Null Sent SMS Click the toggle button to enable/disable this option. When enabled, the router will send notification to the specified phone numbers via SMS if event occurs.

  • Page 73: Services > Ntp

    Robustel R3000 Lite User Guide Event Details Item Description Default Save Position Select the events’ save position from “RAM” or “NVM”.  RAM: Random-access memory  NVM: Non-Volatile Memory Filter Message Enter the filtering message based on the keywords set by users. Click the “Refresh”...

  • Page 74: Services > Sms

    Robustel R3000 Lite User Guide NTP Server Settings Enable Click the toggle button to enable/disable the NTP server option. This window allows you to view the current time of router and also synchronize the router time. Click button to synchronize the router time with the PC’s.

  • Page 75: Services > Email

    Robustel R3000 Lite User Guide User can test the current SMS service whether it is available in this section. SMS Testing Item Description Default Phone Number Enter the specified phone number which can receive the SMS from router. Null Message Enter the message that router will send it to the specified phone number.

  • Page 76: Services > Ddns

    Robustel R3000 Lite User Guide Email Settings Item Description Default Outgoing server Enter the SMTP server IP Address or domain name. Null Server port Enter the SMTP server port. Timeout Set the max time for sending email to SMTP server. When the server doesn’t receive the email over this time, it will try to resend.

  • Page 77: Services > Ssh

    Robustel R3000 Lite User Guide Hostname Enter the hostname provided by the DDNS server. Null Username Enter the username provided by the DDNS server. Null Password Enter the password provided by the DDNS server. Null Enter the URL customized by user.

  • Page 78: Services > Web Server

    Robustel R3000 Lite User Guide Import Authorized Keys Item Description Authorized Keys Click on “Choose File” to locate an authorized key from your computer, and then click “Import” to import this key into your router. Note: This option is valid when enabling the password logins option.

  • Page 79: Services > Advanced

    Robustel R3000 Lite User Guide Import Certificate Item Description Default  CA: a digital certificate issued by CA center  Private Key: a private key file HTTPS Certificate Click on “Choose File” to locate the certificate file from your computer, and then click “Import”...

  • Page 80: System > Debug

    Robustel R3000 Lite User Guide Periodic Reboot Settings Item Description Default Periodic Reboot Set the reboot period of the router. 0 means disable. Daily Reboot Time Set the daily reboot time of the router. You should follow the format as HH: Null MM, in 24h time frame, otherwise the data will be invalid.

  • Page 81: System > Update

    Robustel R3000 Lite User Guide The lower level will output more syslog in detail. Filtering Enter the filtering message based on the keywords. Use “&” to separate more Null than one filter message, such as “keyword1&keyword2”. Refresh Select from “Manual Refresh”, “5 Seconds”, “10 Seconds”, “20 Seconds” or “30 Manual Seconds”.
  • Page 82 File Click on “Choose File” to locate the App file from your computer, and then click to import this file into your router. Note: File format should be xxx.rpk, e.g. R3000 Lite-robustlink-1.0.0.rpk. Installed Apps Index Indicate the ordinal of the list.

  • Page 83: System > Tools

    Robustel R3000 Lite User Guide 3.30 System > Tools This section provides users three tools: Ping, Traceroute and Sniffer. Ping Item Description Default IP address Enter the ping’s destination IP address or destination domain. Null Number of Requests Specify the number of ping requests.
  • Page 84 Robustel R3000 Lite User Guide Traceroute Item Description Default Trace Address Enter the trace’s destination IP address or destination domain. Null Trace Hops Specify the max trace hops. Router will stop tracing if the trace hops has met max value no matter the destination has been reached or not.

  • Page 85: System > Profile

    Robustel R3000 Lite User Guide Sniffer Item Description Default Interface Choose the interface according to your Ethernet configuration. Host Filter the packet that contain the specify IP address. Null Packets Request Set the packet number that the router can sniffer at a time.

  • Page 86: System > User Management

    Robustel R3000 Lite User Guide Ignore Invalid Settings Click the toggle button as “OFF” to ignore invalid settings. XML Configuration File Click on to locate the XML configuration file from your computer, and then click to import this file into your router.
  • Page 87 Robustel R3000 Lite User Guide Super User Settings Item Description Default Old Username Enter the old username of your router. The default is “admin”. Null New Username Enter a new username you want to create; valid characters are a-z, A-Z, 0-9, Null @, ., -, #, $, and *.

  • Page 88: Chapter 4 Configuration Examples

    Robustel R3000 Lite User Guide Chapter 4 Configuration Examples 4.1 Cellular 4.1.1 Cellular Dial-Up This section shows you how to configure the primary and backup SIM card for Cellular Dial-up. Connect the router correctly and insert two SIM, then open the configuration page. Under the homepage menu, click Interface > Link Manager >...
  • Page 89 Robustel R3000 Lite User Guide When finished, click Submit > Save & Apply for the configuration to take effect. The window is displayed below by clicking Interface > Cellular > Advanced Cellular Settings. Click the edit button of SIM1 to set its parameters according to your application request.

  • Page 90: Sms Remote Control

    4.1.2 SMS Remote Control R3000 Lite supports remote control via SMS. You can use following commands to get the status of the router, and set all the parameters of the router. There are three authentication types for SMS control. You can select from “Password”, “Phonenum”...
  • Page 91 Robustel R3000 Lite User Guide XML command: <lan > <network max_entry_num="2" > <id > 1</id > <interface > lan0</interface > <ip > 172.16.7.29</ip > <netmask > 255.255.0.0</netmask > <mtu > 1500</mtu > SMS cmd: set lan network 1 interface lan0 set lan network 1 ip 172.16.7.29...

  • Page 92: Network

    Robustel R3000 Lite User Guide admin:admin;reboot In this command, username is “admin”, password is “admin”, and the command is to reboot the Router. SMS received: admin:admin;set firewall remote_ssh_access false;set firewall remote_telnet_access false In this command, username is “admin”, password is “admin”, and the command is to disable the remote_ssh and remote_telnet access.
  • Page 93 Robustel R3000 Lite User Guide IPsec VPN_Server: Cisco 2811: RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 92/109 Confidential...
  • Page 94 Robustel R3000 Lite User Guide IPsec VPN_Client: The window is displayed as below by clicking VPN > IPsec > Tunnel. Click button and set the parameters of IPsec Client as below. RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 93/109 Confidential...
  • Page 95 Robustel R3000 Lite User Guide When finished, click Submit > Save & Apply for the configuration to take effect. The comparison between server and client is as below. RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 94/109 Confidential...

  • Page 96: Openvpn

    Robustel R3000 Lite User Guide 4.2.2 OpenVPN OpenVPN supports two modes, including Client and P2P. Here takes Client as an example. OpenVPN_Server: Generate relevant OpenVPN certificate on the server side firstly, and refer to the following commands to configuration the Server: local 202.96.1.100...
  • Page 97 Robustel R3000 Lite User Guide verb 3 Note: For more configuration details, please contact your technical support engineer. OpenVPN_Client: Click VPN > OpenVPN > OpenVPN as below. Click to configure the Client01 as below. When finished, click Submit > Save & Apply for the configuration to take effect.

  • Page 98: Gre Vpn

    Robustel R3000 Lite User Guide 4.2.3 GRE VPN The configuration of two points is as follows. The window is displayed as below by clicking VPN > GRE > GRE. GRE-1 ： Click button and set the parameters of GRE-1 as below.
  • Page 99 Robustel R3000 Lite User Guide GRE-2: Click button and set the parameters of GRE-1 as below. When finished, click Submit > Save & Apply for the configuration to take effect. The comparison between GRE-1 and GRE-2 is as below. RT_UG_R3000 Lite_v.3.0.1...

  • Page 100: Chapter 5 Introductions For Cli

    Robustel R3000 Lite User Guide Chapter 5 Introductions for CLI 5.1 What Is CLI Command-line interface (CLI) is a software interface providing another way to set the parameters of equipment from the SSH or through a telnet network connection. Route login:...

  • Page 101: How To Configure The Cli

    = "Fri May 12 15:44:07 2017" Example 2: Update firmware via tftp # tftpupdate (space+?) firmware New firmware # tftpupdate firmware (space+?) String Firmware name # tftpupdate firmware R3000 Lite-firmware-sysupgrade-unknown.bin host 192.168.100.99 //enter a new firmware name Downloading RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 100/109...
  • Page 102 Robustel R3000 Lite User Guide R3000 Lite-firmware-s 100% |*******************************| 5018k 0:00:00 ETA Flashing Checking 100% Decrypting 100% Flashing 100% Verifying 100% Verfify Success upgrade success //update success # config save_and_apply // save and apply current configuration, make you configuration effect...
  • Page 103 Robustel R3000 Lite User Guide Enum Primary Link (wwan1/wwan2/wan) # set link_manager primary_link wwan1 //select “wwan1” as primary_link //setting succeed # set link_manager link 1 type Type desc Description connection_type Connection Type wwan WWAN Settings static_addr Static Address Settings pppoe...
  • Page 104 Robustel R3000 Lite User Guide netmask = 255.255.255.0 mtu = 1500 dhcp { enable = true mode = server relay_server = "" pool_start = 192.168.0.2 pool_end = 192.168.0.100 netmask = 255.255.255.0 gateway = "" primary_dns = "" secondary_dns = ""...
  • Page 105 Robustel R3000 Lite User Guide Example 5: CLI for setting Cellular # show cellular all sim { id = 1 card = sim1 phone_number = "" extra_at_cmd = "" network_type = auto band_select_type = all band_gsm_850 = false band_gsm_900 = false...
  • Page 106 Robustel R3000 Lite User Guide band_wcdma_1900 = false band_wcdma_2100 = false band_lte_800 = false band_lte_850 = false band_lte_900 = false band_lte_1800 = false band_lte_1900 = false band_lte_2100 = false band_lte_2600 = false band_lte_1700 = false band_lte_700 = false band_tdd_lte_2600 = false...

  • Page 107: Commands Reference

    Robustel R3000 Lite User Guide band_lte_1900 LTE 1900 (band 2) band_lte_2100 LTE 2100 (band 1) band_lte_2600 LTE 2600 (band 7) band_lte_1700 LTE 1700 (band 4) band_lte_700 LTE 700 (band 17) band_tdd_lte_2600 TDD LTE 2600 (band 38) band_tdd_lte_1900 TDD LTE 1900 (band 39)

  • Page 108: Glossary

    Robustel R3000 Lite User Guide Glossary Abbr. Description Alternating Current Access Point Name ASCII American Standard Code for Information Interchange Conformité Européene (European Conformity) CHAP Challenge Handshake Authentication Protocol Command Line Interface for batch scripting Circuit Switched Data Clear to Send...
  • Page 109 Robustel R3000 Lite User Guide Abbr. Description local area network Light Emitting Diode Machine to Machine Maximum Minimum Mobile Originated Mobile Station Mobile Terminated OpenVPN Open Virtual Private Network Password Authentication Protocol Personal Computer Personal Communications Network, also referred to as DCS 1800...
  • Page 110 Robustel R3000 Lite User Guide Abbr. Description VSWR Voltage Stationary Wave Ratio Wide Area Network RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 109/109 Confidential...
  • Page 111 Robustel R3000 Lite User Guide Guangzhou Robustel Technologies Co., Ltd. Add: 3rd Floor, Building F, Kehui Park, No.95 Daguan Road, Guangzhou, China 510660 Tel: 086-20-29019902 Email: info@robustel.com Web: www.robustel.com RT_UG_R3000 Lite_v.3.0.1 19 May, 2017 110/109 Confidential...

Table of Contents