Getting Started; Installation; Module Specifications; Module Accessories And Cables - NI PXIe-4322 User Manual

Getting Started

The NI PXIe-4322 provides eight, simultaneously updated, analog output channels, each with
channel-to-channel and channel-to-earth isolation. Each channel has a 16-bit digital-to-analog
converter (DAC) and can be configured as voltage output mode or current output mode. The
voltage mode has ±16 V output range and the current mode has ±20 mA output range.

Installation

Refer to the NI PXIe-4322 and TB-4322 Installation Guide and Terminal Block Specifications
for step-by-step software and hardware installation instructions.

Module Specifications

Refer to the NI PXIe-4322 Specifications document for module specifications.

Module Accessories and Cables

Refer to the NI PXIe-4322 and TB-4322 Installation Guide and Terminal Block Specifications
document for information about supported accessories and cables.
Caution
any terminal, safety low-voltage (≤30 V
to any other terminal.
Caution
terminal block without the terminal block being connected to the NI PXIe-4322.
When hazardous voltages (>30 V
Do not supply hazardous voltages (>30 V
/42.4 V /60 VDC) are present on
rms pk
/42.4 V /60 VDC) cannot be connected
rms pk
/42.4 V
rms
© National Instruments | 1-1
1
/60 VDC) to the
pk