Advertisement
Press VOL
options. The output value of each option is divided equally into 100 steps.
Press VOL+ can increase output value until it reaches the max (100). Press
VOL
When VOL+ or VOL- is used to change output values, a bar-like OSD at
the bottom of the screen will indicate its changing direction with an arrow.
The output values changed will be stored in EEPROM automatically.
If no operation is performed within 10 seconds, AUDIO menu will quit
automatically.
3). OSD display (about 10 seconds)
4 15 CLOCK remote control and local buttons
1) Function to enter into CLOCK menu.
2) Description:
CLOCK menu operation description
Press CLOCK button to enter into CLOCK menu. If time is not set after
start-up, OSD display of the options is yellow. If time is set, then the
options are in green OSD display.
Use Clock button to select in circles or press POS /POS
proper items upward or downward. The option selected will be pointed out
with an arrow, and its OSD display is red. (CLOCK must be set before
setting the options hereafter.)
Press VOL
and use VOL
press of VOL- adds one hour. Press VOL
or VOL
to increase or decrease the output values of relevant
can decrease the output value until it reaches the minimum (0).
AUDIO
VOLUME
TREBLE
BASS
BALANCE
or VOL
to change setting values. Use VOL
to set hour. Each press of VOL
25
50
50
00
25
or VOL
button to select
to set minute,
adds one minute each
button and hold for
Advertisement
