Advertisement
VIVID" and "LIGHT" that is to set corresponding brightness, contrast,
sharpness, chrominance and tint . Besides, the "PERSONAL" can be
adjusted as you like and be stored automatically into the EEPROM for use.
"FACTORY" and "B/W BALANCE" modes also provide "FACTORY1"and
"FACTORY2" modes as well as the above modes.
Press PP button to change in the following order
STANDARD
3). Output values
BRIGHT NESS
STANDARD
SOFT
VIVID
LIGHT
FACTORY1
FACTORY2
4). OSD display (about 5 seconds)
4-14.AUDIO (remote control button)
1). Function: enter into AUDIO menu.
2). Description:
If stereo function is not set or stored in EEPROM, then AUDIO button do not
work. If simple stereo is set, then "treble" and "bass" are not included in the
menu.
Press AUDIO to reach AUDIO menu. Press AUDIO to select options in circles,
or press POS+ or POS- to select upward and downward. The option
selected is pointed out by an arrow, and its OSD is red. The OSD of other
options not selected are green.
SOFT
VIVID
(NORMAL mode)
MEMORY
CONTRAST CHROMINANCE SHARPNESS TINT
80
70
60
100
00
100
STANDARD
("FACTORY" and "BALANCE" mode)
LIGHT
80
50
40
60
100
88
100
70
00
00
100
00
FACTORY1
FACTORY2
50
00
25
00
70
00
72
00
00
00
00
00
Advertisement
