Advertisement
press VOL
In PRESET menu, press figure buttons (0~9) and (--) button to select the
program position to be adjusted directly.
During fine adjustment and semi-auto search, the color of OSD display bar will
turn to red, and the small erect bar displaying PWM setting values will
turn into an arrow indicating direction. When the operation is finished or
paused, the OSD display bar will turn to green.
During semi-auto search, search will stop when a program position is searched.
During semi-auto search, press VOL+ or VOL- button to change search
direction; press MENU button to stop search.
During auto-search, press MENU button to stop searching.
The modification of setting values will be automatically stored in EEPROM
addresses corresponding to program positions.
When auto-search is completed, the color system of the program positions
stored is set to AUTO the sound system is the same as that of the position
before auto-search.
If the position of a certain program is set to REMEMBER OFF this position
will be skipped off when POS /POS
button or "0~9" buttons are used to select the REMEMBER OFF position
directly, its position display will become red for distinguishing.
If a program position is fine adjusted, then the automatic digital AFT will be
off automatically. When the fine adjusted position is selected, its position
display will turn to yellow for distinguishing.
If no operation is performed within ten seconds, the PRESET menu will quit
automatically.
4) PRESET menu OSD display (about ten seconds)
POSITION
REMEMBER
BAND
FINE
SEMI SEARCH
AUTO SEARCH
5). CHANNEL menu operation instruction
Press MENU button to reach CHANNEL menu. Press POS+/ POS- button to
select options upward and downward. The option selected will be indicated
button to move downward.
PRESET
0
OFF
V L
is used to change positions. If "--"
Advertisement
