KSB S 100D Booklet

KSB S 100D Booklet

Submersible borehole pumps 60 hz
Hide thumbs Also See for S 100D:

Advertisement

Type series booklet
3400.51/2--10
Applications
-- Drinking and service water supply
-- Irrigation and spray irrigation
-- Lowering and maintaining ground water levels
-- Pressure boosting
-- Fountains
-- Mining, offshore, tank farms
-- Building services systems
-- VDS sprinkler systems
Operating Data
Capacity
. . . . . . . . . . . . . . . . . .
Head
. . . . . . . . . . . . . . . . . . . . .
Temperature of fluid handled
Speed
. . . . . . . . . . . . . . . . . . . .
Supply voltage
. . . . . . . . . . . . .
Design
Single-- or multistage centrifugal pumps in pump shroud or in
ring--section design. Radial or mixed flow hydraulic systems;
reduced impeller diameters also available in some cases. The
stage casings of radial pumps are connected by metal straps,
those of mixed flow pumps by stud bolts. Suction casing fitted
between pump and motor. Suction casing equipped with
strainer to protect the pump from coarse particles in the fluid.
Pumps with check valve or connection branch on option.
Available with threaded or flanged end on option.
Particularly suitable for vertical installation in narrow deep wells.
Pump Designation
Type series
Minimum well diameter (mm)
(for ex.: 200 mm = 8 inches)
Design status
Capacity (Q
at 50Hz)
opt
3
m
/h (4 up to 10 inches)
l/s (12 inches and above)
Number of stages
Reduced impeller diameters
1)
UPA 200 -11 + 14: Q in l/s.
Motor Designation
Type series
Well diameter (mm)
(for ex. 250 mm = 10 inches)
Design status
Rated power P
for 50 Hz (kW)
N
Number of poles
Winding insulation
60 Hz
3
Q up to 1080 m
/h (300 l/s
or up to 5000 US GPM)
H up to 460 m
o
. .
t
up to +50
C
n
≈ 3500 rpm
U up to 10,000 V
(Example)
UPA 200 B --
1)
(Example)
UMA 250 D 110 / 2 1
Submersible Borehole Pumps
S 100D, UPA 100C, UPA 150C, UPA 200,
80 / 5 b
Complete Range
The complete submersible borehole pump range comprises
pump models for capacity up to Q = 2500 m
heads up to H = 1500 m.
The submersible motor range covers sizes for power ratings up
to P = 3500 kW (4700 hp) and voltages up to U = 10,000 V for
50 and 60 Hz.
In addition, a special range is available which features
submersible motors with a higher number of poles.
Certification
Quality management certified to ISO 9001
Submersible Borehole Pumps
UPA 200B, UPA 250C, UPA 300,
UPA 350, BSX - - BSF, UPZ
Available automation products:
• Hyamaster
(UPA 200 and UPA 300)
3
/h (695 l/s) and

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S 100D and is the answer not in the manual?

Questions and answers

Summary of Contents for KSB S 100D

  • Page 1 3400.51/2--10 Applications Submersible Borehole Pumps -- Drinking and service water supply S 100D, UPA 100C, UPA 150C, UPA 200, -- Irrigation and spray irrigation UPA 200B, UPA 250C, UPA 300, -- Lowering and maintaining ground water levels -- Pressure boosting...
  • Page 2: Table Of Contents

    60 Hz Submersible Borehole Pumps Contents Page The 60 Hz Submersible Borehole Pump Range ............. . Operation with Soft Starters .
  • Page 3 -- first rough selection -- on your own to find a suitable KSB submersible borehole pump for your Pump Efficiency application. We have kept the volume of the catalogue down to what we think is the absolute minimum. For the 4 to 14 inch...
  • Page 4: The 60 Hz Submersible Borehole Pump Range

    (≥16 inches) " UPV 200 " UPA 100C (8 inches) (4 inches) " UPA 200 (8/10 inches) " S 100D (4 inches) " UPA 150C (6 inches) " UPA 200B (8/10 inches) " UPA 300, 350 (12/14 inches) " UPA 250C...
  • Page 5: Operation With Soft Starters

    60 Hz Submersible Borehole Pumps Operation of KSB Submersible Borehole Pumps with Soft Starters Effects on submersible borehole pumps Soft starters electronically reduce the incoming line voltage and, hence, the initial starting torque and starting current of -- Starting current ⇒ approx. 40% to 65% of I required for electric motors.
  • Page 6: Operation With Frequency Inverter

    60 Hz Submersible Borehole Pumps Pump Operation with Frequency Inverter Maximum Operating Frequency In principle, the motors of submersible borehole pumps can also be run on a frequency inverter. As submersible motors Frequency inverter operation above the nominal frequency differ from conventional standardized motors in terms of (50Hz / 60Hz) of the pump unit must be avoided so as, to bearings, moment of inertia, insulation, temperature increase, prevent motor overload.
  • Page 7: Typical Installation Positions

    60 Hz Submersible Borehole Pumps Typical Installation Positions Vertical Installation (deep well, pump sump, etc.) CAUTION: The construction of the well head must meet the relevant regulations of the competent authorities! The unit must never be installed with its suction strainer exactly at the level of the well screen / filter! Before installing the unit in narrow deep wells we recommend to check narrow boreholes for dimensional accuracy over their...
  • Page 8: Submersible Borehole Pump Selection For Deep Wells

    60 Hz Submersible Borehole Pumps Selection for Deep Wells Pump Selection The following data are required for a first rough selection of a submersible borehole pump: -- Capacity Q in m /h (l/s) -- Pressure at well head H in m -- Well diameter D in inches or mm -- Temperature of fluid handled t in °C...
  • Page 9: Request For Quotation (Form)

    60 Hz Submersible Borehole Pumps Request for Quotation Discharge head required at the end of the piping: We should like to test the efficiency and ..... bar) quality of your computer-aided quotation process.
  • Page 10: Head Losses In The Piping

    60 Hz Submersible Borehole Pumps Head Losses in the Piping ft/100 ft m/100 m 3300:103/3-2 The friction losses given in the above chart roughly apply to new diameter reduced by incrustations. For pipes subject to con- cast iron pipes. For new rolled steel or plastic pipes, multiply the siderable incrustation, the friction losses can only be deter- values by approx.
  • Page 11: Pump Sets 4 Inches

    60 Hz S 100D Applications Submersible Borehole Pumps Domestic and general water supply Irrigation and spray irrigation for Well Diameters Lowering groundwater levels of 100 mm (4 inches) and Above Fountains Pressure boosting Air-conditioning systems Fire protection Cooling water cycles...
  • Page 12 60 Hz S 100D Selection Chart 3450 rpm (Ranges on Offer) ¶ S 100D 2 S 100D 1 S 100D 4 S 100D 7 S 100D 12...
  • Page 13 Vertical and, depending on the number of stages, inclined as Temperatures well as horizontal installation (see tables on page 15 to 19) The S 100D submersible borehole pump is designed for use in water with temperatures of up to t = + 30...
  • Page 14 60 Hz S 100D Design Features (Pump sizes D1 -- D2) Stainless steel valve housing Non-return valve with double-guided valve disc -- No jamming or tilting. -- If not required, the non-return valve may be removed. Diffusers with smooth surfaces -- Made of glass fibre reinforced Noryl.
  • Page 15 60 Hz S 100D S 100D - - 1 for well diameters of 100 mm (4 inches) and above Pumps with submersible motors for ... Tolerances to Temperature of fluid handled ..up + 30 ISO 9906 Class 2...
  • Page 16 60 Hz S 100D S 100D - - 2 for well diameters of 100 mm (4 inches) and above Pumps with submersible motors for ... Tolerances to Temperature of fluid handled ..up + 30 ISO 9906 Class 2 Current / Operating voltage .
  • Page 17 60 Hz S 100D S 100D - - 4 for well diameters of 100 mm (4 inches) and above Pumps with submersible motors for ... Tolerances to Temperature of fluid handled ..up + 30 ISO 9906 Class 2...
  • Page 18 60 Hz S 100D S 100D - - 7 for well diameters of 100 mm (4 inches) and above Pumps with submersible motors for ... Tolerances to Temperature of fluid handled ..up + 30 ISO 9906 Class 2...
  • Page 19 60 Hz S 100D S 100D - - 12 for well diameters of 100 mm (4 inches) and above Pumps with submersible motors for ... Temperature of fluid handled ..up + 30 Tolerances to ISO 9906 Class 2 Current / Operating voltage .
  • Page 20 60 Hz S 100D Permissible Cable Lengths ∆ U up to 3 %, direct starting and t up to + 30 Current / Motor Motor Cable lengths for Voltage rating rating cable cross-section in ... mm 1.36 352 m 587 m...
  • Page 21 60 Hz UPA 100C Applications Submersible Borehole Pumps Domestic and general water supply of Stainless Steel Irrigation and spray irrigation for Well Diameters Groundwater lowering of 100 mm (4 inches) and Above Fountains Pressure boosting Air-conditioning systems Fire protection Cooling water cycles Operating Data Capacity .
  • Page 22 60 Hz UPA 100C Selection Chart n ¶ 3500 rpm (Ranges on Offer) UPA 100C 16 UPA 100C 10 UPA 100C 22 UPA 100C 35 UPA 100C 60 UPA 100C 22 UPA 100C 35 UPA 100C 16 UPA 100C 10 UPA 100C 60 Note: The diagram shows the ∆Q range on offer.
  • Page 23 60 Hz UPA 100C Materials Drive Type ....submersible canned motor Components Execution C1 Connection ... . . NEMA standard Pump ...
  • Page 24 60 Hz UPA 100C Design Features Optimised operating costs: Check valve, built into the dis- Resistance to corrosion and abra- charge chamber, designed for low sion, i.e. the same inherent qualities loss of head. of stainless steel. Hydraulic profiles are optimized for the attainment of high efficiencies.
  • Page 25 60 Hz UPA 100C UPA 100C 10 - - ... UPA 100C 10 - - ... (Tolerances to ISO 2548 Class C, Annex B) (3.86 inch) (3.75 inch) Ø D1 max: Pump = 96.5 mm Pump with motor = 98.0 mm Rated Rated Rated current...
  • Page 26 60 Hz UPA 100C UPA 100C 16 - - ... UPA 100C 16 - - ... (Tolerances to ISO 2548 Class C, Annex B) (3.86 inch) (3.75 inch) Ø D1 max: Pump = 96.5 mm Pump with motor = 98.0 mm Rated Rated Rated current...
  • Page 27 60 Hz UPA 100C UPA 100C 22 - - ... UPA 100C 22 - - ... (Tolerances to ISO 2548 Class C, Annex B) (3.86 inch) (3.75 inch) Ø D1 max: Pump = 96,5 mm Pump with motor = 98,0 mm Rated Rated Rated current...
  • Page 28 60 Hz UPA 100C UPA 100C 35 - - ... UPA 100C 35 - - ... (Tolerances to ISO 2548 Class C, Annex B) (3.86 inch) (3.75 inch) Ø D1 max: Pump = 96,5 mm Pump with motor = 98,0 mm Rated Rated Rated current...
  • Page 29 60 Hz UPA 100C UPA 100C 60 - - ... UPA 100C 60 - - ... (Tolerances to ISO 2548 Class C, Annex B) (3.86 inch) (3.75 inch) Ø D1 max: Pump = 96,5 mm Pump with motor = 98,0 mm Rated Rated Rated current...
  • Page 30 60 Hz UPA 100C...
  • Page 31: Pump Sets 6 Inches

    60 Hz UPA 150C Applications Submersible Borehole Pumps Suitable for handling clean or slightly contaminated water for Well Diameters of in applications such as: 150 mm (6 inches) -- domestic water supply -- general water supply -- irrigation and spray irrigation systems -- artificial lowering of the ground water level as well as -- heat transfer plants In addition, the pump sets are used in pressure...
  • Page 32 60 Hz UPA 150C Selection Charts 3500 rpm (Ranges on Offer) ≈ UPA 150C - - 60 UPA 150C - - 16 UPA 150C - - 30 UPA 150C - - 48 UPA 150C - - 16 UPA 150C - - 60 UPA 150C - - 30 UPA 150C - - 48...
  • Page 33 60 Hz UPA 150C Material Variants Bearings / Lubrication Radial plain bearings: pump bearings lubricated by the fluid Material handled, motor bearings by the motor’s water fill. Axial thrust is Component Component C1 (AISI 304) C2 (AISI 316) balanced by a tilting-pad thrust bearing in the motor (lower end). Pump Direction of Rotation of the Pump Suction casing...
  • Page 34 60 Hz UPA 150C Starting Motor DN 100 ..d.o.l. only (autotransformer or soft starter) Motor UMA 150D d.o.l. (autotransformer or soft starter) or star-delta Variable Speed The submersible borehole pumps can also be equipped with a speed control system to accommodate different operating points.
  • Page 35 60 Hz UPA 150C Design Features of the pump Corrosion resistance The pump and motor are constructed Flexibility of high--grade stainless steel as D Exchangeable connection variants standard -- producing consistently D Check valve can be removed easily high efficiency levels. Also available D Suitable for vertical installation in in higher grade CrNiMo steel for deep wells or horizontal installation...
  • Page 36 60 Hz UPA 150C Design Features of the motor UMA 150D The KSB motor -- VDE-compliant, i.e., high level of electrical safety. -- Designed for max. pump power to protect unit from overloads. Dynamically balanced rotor -- Ensures smooth running.
  • Page 37 60 Hz UPA 150C...
  • Page 38 60 Hz UPA 150C UPA 150C - - 16 / ...; number of stages 1 - - 15 The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. Selection The pressure losses H in the check valve are not considered in the pump characteristic curves.
  • Page 39 60 Hz UPA 150C UPA 150C - - 16 / ...; number of stages 16 - - 45 The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. Selection The pressure losses H in the check valve are not considered in the pump characteristic curves.
  • Page 40 60 Hz UPA 150C Technical Data Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3 µ) / 460 V -- Starting .
  • Page 41 60 Hz UPA 150C Dimensions / Weights / Horizontal Installation 2)3) Installation ≈ ≈ ≈ UPA 150C - - 16 / ... C1 (AISI 304) C2 (AISI 316) d.o.l. Y-∆ 1075 1075 1310 1310 v + h 1370 1370 v + h 1455 1450 v + h...
  • Page 42 60 Hz UPA 150C UPA 150C - - 30 / ...; number of stages 1 - - 13 The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. Selection The pressure losses H in the check valve are not considered in the pump characteristic curves.
  • Page 43 60 Hz UPA 150C UPA 150C - - 30 / ...; number of stages 14 - - 23 The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. Selection The pressure losses H in the check valve are not considered in the pump characteristic curves.
  • Page 44 60 Hz UPA 150C Technical Data Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3 µ) / 460 V -- Starting .
  • Page 45 60 Hz UPA 150C Dimensions / Weights / Horizontal Installation Installation ≈ ≈ ≈ UPA 150C - - 30 / ... C1 (AISI 304) C2 (AISI 316) d.o.l. Y-∆ 1315 1310 v + h 1410 1410 v + h 1525 1525 v + h 1620...
  • Page 46 60 Hz UPA 150C UPA 150C - - 48 / ...; number of stages 1 - - 14 The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. Selection The pressure losses H in the check valve are not considered in the pump characteristic curves.
  • Page 47 60 Hz UPA 150C Technical Data Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3 µ) / 460 V -- Starting .
  • Page 48 60 Hz UPA 150C UPA 150C - - 60 / ...; number of stages 1 - - 11 The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. Selection The pressure losses H in the check valve are not considered in the pump characteristic curves.
  • Page 49 60 Hz UPA 150C Technical Data Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3 µ) / 460 V -- Starting .
  • Page 50 60 Hz UPA 150C...
  • Page 51: Pump Sets 8 Inches / 10 Inches

    UPA 200, 200B, 250C 60 Hz Applications Submersible Borehole Pumps Handling clean or slightly contaminated water ... for Well Diameters in general water supply systems, in irrigation and spray irrigation systems, of 200 mm (8 inches) and Above in pressure boosting systems, and of 250 mm (10 inches) and Above in emergency water supply systems, in installations for lowering and maintaining ground water...
  • Page 52 UPA 200, 200B, 250C 60 Hz Selection Chart n ≈ 3500 rpm (Ranges on Offer) UPA 250C - - 120 UPA 250C - - 250 UPA 200B - - 80 UPA 200 - - 11 UPA 250C - - 150 UPA 200 - - 14 UPA 200B - - 130 UPA 250C-120...
  • Page 53 UPA 200, 200B, 250C 60 Hz UPA 200 Threaded End Flanged End Material Variants Component Execution G Execution B Casing Cast iron Bronze (JL1030) (CC480K--GS) Impeller Glass fibre reinforced NORYL (PPO) Diffuser Glass fibre reinforced NORYL (PPO) Shaft Cr steel CrNiMo steel (1.4021) (1.4462)
  • Page 54 UPA 200, 200B, 250C 60 Hz UPA 200B, 250C Pump End (Discharge Nozzle) At choice with female thread G 5’’ and G 6’’ or flange DN 125 and DN 150 dependent on pump size. Material Variants Coating (Standard) (Standard) (Special) (Duplex) UPA pump Quality...
  • Page 55 UPA 200, 200B, 250C 60 Hz Starting Direct on line (without or with starting transformer as well as with smooth running device) or star-delta starting. Variable Speed The submersible motor pumps can also be adjusted with a speed adjustment to different duty points. Application Temperatures The submersible borehole pumps are, as a standard, suitable for use in water with temperatures of up to t =...
  • Page 56 Energy-efficient hydraulic systems -- High efficiency and low energy Integrated sand separator costs. -- Tried and tested KSB patent. -- Added protection from abrasive wear for shafts and bearing areas. -- Long service life and high operating reliability. The KSB motor Wear-resistant mechanical seal -- VDE-compliant, i.e., high level of...
  • Page 57 UPA 200, 200B, 250C 60 Hz...
  • Page 58 60 Hz UPA 200 UPA 200 – 11 for Well Diameters of 200 mm (8 inches) and Above Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3~) / 460 V -- Starting .
  • Page 59 60 Hz UPA 200 UPA 200 - 11 / .. The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. UPA 200 - - 11 /.. (Tolerances to Selection ISO 9906 Class 2) The pressure losses H in the check valve are not considered in the pump characteristic...
  • Page 60 60 Hz UPA 200 UPA 200 - -14 for Well Diameters of 200 mm (8 inches) and Above Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3~) / 460 V -- Starting .
  • Page 61 60 Hz UPA 200 UPA 200 - 14 / .. The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. UPA 200 - - 14 /.. (Tolerances to ISO 9906 Class 2) Selection The pressure losses H in the check valve are...
  • Page 62 60 Hz UPA 200B, 250C UPA 200B - - 80 for Well Diameters of 200 mm (8 inches) and Above Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3~) / 460 V -- Starting .
  • Page 63 60 Hz UPA 200B, 250C UPA 200B - - 80 / .. The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. UPA 200B - - 80 /.. (Tolerances to ISO 9906 Class 2) Selection The characteristic curves shown apply to the standard impeller material, i.e.
  • Page 64 60 Hz UPA 200B, 250C UPA 200B - - 130 for Well Diameters of 200 mm (8 inches) and Above Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3~) / 460 V -- Starting .
  • Page 65 60 Hz UPA 200B, 250C UPA 200B - - 130 / .. The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. UPA 200B - - 130 /.. (Tolerances to Selection ISO 9906 Class 2) The characteristic curves shown apply to the standard impeller material, i.e.
  • Page 66 60 Hz UPA 200B, 250C UPA 250C - - 120 for Well Diameters of 250 mm (10 inches) and Above Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3~) / 460 V -- Starting .
  • Page 67 60 Hz UPA 200B, 250C UPA 250C - - 120 / .. The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. UPA 250C - - 120 /.. (Tolerances to ISO 9906 Class 2) Selection The pressure losses H in the check valve are not...
  • Page 68 60 Hz UPA 200B, 250C UPA 250C - -150 for Well Diameters of 250 mm (10 inches) and Above Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3~) / 460 V -- Starting .
  • Page 69 60 Hz UPA 200B, 250C UPA 250C - - 150 / .. The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. UPA 250C - - 150 /.. (Tolerances to ISO 9906 Class 2) Selection The pressure losses H in the check valve are not...
  • Page 70 60 Hz UPA 200B, 250C UPA 250C - - 250 for Well Diameters of 250 mm (10 inches) and Above Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3~) / 460 V -- Starting .
  • Page 71 60 Hz UPA 200B, 250C UPA 250C - - 250 / .. The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. UPA 250C - - 250 /.. (Tolerances to ISO 9906 Class 2) Selection The pressure losses H in the check valve are not...
  • Page 72 60 Hz UPA 200B, 250C...
  • Page 73: Pump Sets 12 Inches / 14 Inches

    60 Hz UPA 300, 350 Application Submersible Borehole Pumps Handling clean or slightly contaminated water in applications such as: for Well Diameters general water supply of 300 mm (12 inches) and Above irrigation and spray irrigation and of 350 mm (14 inches) and Above pressure boosting Single-entry and mixed flow lowering and maintaining ground water levels as well as...
  • Page 74 UPA 300, 350 60 Hz Selection Chart n ≈ 3500 rpm (Ranges on Offer) UPA 300 - - 94 UPA 300 - - 65 UPA 350 - - 128 UPA 350 - - 180 UPA 300 - - 65 UPA 350 - - 180 UPA 350 - - 128 UPA 300 - - 94 Note: The diagram shows the ∆Q...
  • Page 75 60 Hz UPA 300, 350 Material Variants Type of Installation In general, the pumps are installed vertically. Some models may also be installed horizontally, depending on the number of G (Standard) B (Special) C3 (Duplex) stages and motor size. Pump Casing Cast iron Bronze...
  • Page 76 Wear-resistant mechanical seal -- Long service life and high operating reliability. The KSB motor -- Efficiencies up to 91 %. -- VDE-compliant, i.e. high level of electrical safety. -- Designed for max. pump power to protect unit from overloads.
  • Page 77 60 Hz UPA 300, 350...
  • Page 78 UPA 300, 350 60 Hz UPA 300 - - 65 for Well Diameters of 300 mm (12 inches) and Above Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3~) / 460 V -- Starting .
  • Page 79 60 Hz UPA 300, 350 UPA 300 - - 65 / .. The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. UPA 300 - - 65 (Tolerances to ISO 9906 Class 2) Selection The pressure losses H in the check valve are not...
  • Page 80 UPA 300, 350 60 Hz UPA 300 - - 94 for Well Diameters of 300 mm (12 inches) and Above Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3~) / 460 V -- Starting .
  • Page 81 60 Hz UPA 300, 350 UPA 300 - - 94 / .. The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. UPA 300 - - 94 (Tolerances to ISO 9906 Class 2) Selection The pressure losses H in the check valve are not...
  • Page 82 UPA 300, 350 60 Hz UPA 350 - - 128 for Well Diameters of 350 mm (14 inches) and Above Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3~) / 460 V -- Starting .
  • Page 83 60 Hz UPA 300, 350 UPA 350 - - 128 / .. The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. UPA 350 - - 128 (Tolerances to ISO 9906 Class 2) Selection The pressure losses H in the check valve are not...
  • Page 84 UPA 300, 350 60 Hz UPA 350 - - 180 for Well Diameters of 350 mm (14 inches) and Above Pumps with submersible motors for ... -- Type of current / voltage ......three-phase (3~) / 460 V -- Starting .
  • Page 85 60 Hz UPA 300, 350 UPA 350 - - 180 /.. The characteristic curves shown are for preliminary selection only. Exact selection data will be provided in our quotation. UPA 350 - - 180 (Tolerances to ISO 9906 Class 2) Selection The pressure losses H in the check valve are not...
  • Page 86 UPA 300, 350 60 Hz...
  • Page 87: Pump Sets 16 Inches And Above

    60 Hz BSX, BSF Applications Submersible Borehole Pumps Transport of pure and natural water for ... for Well Diameters general water procuring and supplying, of 400 mm (16 inches) and Above irrigation and sprinkling, single-flow and mixed-flow ground-water lowering and maintaining in open-work mining, water maintaining and draining of galleries in underground mining.
  • Page 88 BSX, BSF 60 Hz Selection Chart n ≈ 1750 rpm (Ranges on Offer) U.S.gpm 1000 1400 4000 2000 3000 6000 10000 Imp.g.p.m. 2000 3000 4000 6000 10000 1000 1400 2000 1000 BRY 504 BRZS 535 BRE 555 BSX 463 BSF 586 1000 2000 3000...
  • Page 89 60 Hz BSX, BSF Materials Drive KSB submersible motors DN 300 and above in squirrel-cage Component Execution G Execution B design, three-phase current (3~), 4 poles. For low (U = 1000 V) Pump ... and high (U = 6000V) voltage. Water-filled motor. The water fill...
  • Page 90 (CrNiMo). -- That is a guarantee for a high degree of functional reliability and a considerably simplified dismantling. The motor KSB -- Acc. to VDE standards, i.e. a high level of electric safety. -- Designed for max. possible pump power consumption and thus protected against overload.
  • Page 91 60 Hz Applications Submersible Borehole Pumps Handling clean and raw water in applications such as: general water extraction / supply, for Well Diameters irrigation and spray irrigation, of 500 mm (20 inches) and Above lowering and maintaining ground water levels in open-cast Double entry, back-to-back impeller arrangement mines, dewatering and gallery drainage in underground mines.
  • Page 92 60 Hz Selection Chart n ≈ 3500 rpm and n ≈ 1750 rpm (Ranges on Offer) U.S.gpm 1000 2000 5000 10000 Imp. g. p. m. 1000 2000 5000 2000 6000 UPZ ... 1500 5000 4000 1000 n = 1450 1/min 3000 2000 1000...
  • Page 93 CrNiMo steel (1.4462) Drive Wear ring Aluminium bronze (CuAl10Ni) CrNiMo steel KSB submersible squirrel-cage motor, 2 or 4 poles. Three-phase current (3~). Bearings Chrome steel (1.4021), hard chrome plated / special bronze or other For supply voltages up to U = 6600 V. Water-filled motor. The...
  • Page 94 60 Hz Design Features Enclosed pump bearing Robust wear rings -- No--maintenance design, high wear -- Replaceable wear rings made of resistance. wear- and corrosion-resistant metal. -- For trouble-free long-term operation. -- Protection against wear in the clearance; easy servicing. Stainless steel pump shaft Pump shroud -- Fully protected by impeller hubs and...
  • Page 95: Typical Tenders: 4 To 14 Inches

    Submersible borehole pump(s) type S 100D for well diameters of 100 mm (4 inches) and above Make: Pump + motor: S 100D - - ......
  • Page 96 60 Hz Submersible Borehole Pumps Typical Tender UPA 100C Unit price Amount Item Submersible borehole pump(s) type UPA 100C for well diameters of 100 mm (4 inches) and above. Marke: Pump + motor: UPA 100C - - Multistage centrifugal pump for vertical / angled / horizontal installation.
  • Page 97 60 Hz Submersible Borehole Pumps Typical Tender UPA 200, 200B, 250C Unit price Amount Item Submersible borehole pump(s) type UPA 200 / 200B / 250C for well diameters of 200 mm (8 inches) and above. Make: Pump + motor: Multistage centrifugal pump in ring-section design for vertical / horizontal installation.
  • Page 98 60 Hz Submersible Borehole Pumps Typical Tender for UPA 300, 350 Unit price Amount Item Submersible borehole pump(s) type UPA 300 / 350 for well diameters of 300 mm (12 inches) and above. Make: Pump + motor: Multistage centrifugal pump in ring-section design for vertical / horizontal installa- tion.
  • Page 99 60 Hz Submersible Borehole Pumps...
  • Page 100: Submersible Motors

    DN 100, 150, UMA 150D, 200D, 250D and 300D of 100 mm (4 inches) and above Sizes / Connection DN 100, DN 150, UMA 150D, UMA200D: NEMA standard UMA 250D, UMA 300D: KSB standard 940.52 412.53 Material Variants (Material specifications to EN) 914.53...
  • Page 101 60 Hz Submersible Motors Submersible Motors DN 100, UMA 150D to 300D: 3~, n≈ 3500 1/min, d.o.l. + Y-∆ η φ Cu ∅ (submerged) Standard Standard 460 V d.o.l. Y-∆ Motor size ¶ mm ¶ kg DN 100 ... 0.37 0.59 0.76 4 x 1.5...
  • Page 102: Accessories

    60 Hz Accessories Accessories Description Ident. No. ≈ Electric extension cable , blue, rubber-sheathed cable for submerged Cable operation in drinking water applications, ambient temperatures t ≤+50 - - Cable kit, 4-core, round, only for pump sets with three-phase current (3~ motors, DN 100, G RD GWT - J - 4G 1.5 (4 x 1.5 mm ) with earth conductor...
  • Page 103 60 Hz Accessories Accessories Description Ident. No. ≈ Cable connector, non-separable, including sealing compound, for connecting 1 extension cable to 1 or 2 motor leads - - Size 28 for connecting 1 extension cable to ... 1 motor lead ....-- supplied, but not connected 95 005 106 0.45...
  • Page 104 60 Hz Accessories Accessories Description Ident. No. ≈ Adapter from threaded end G 1 ’’ to threaded end G 1 ’’ ... 90 052 823 Material: CrNiMo steel Mode of supply: sealed and screwed tightly into the pump end. Adapter, threaded end G / Flange DN, PN 10/40 with 2 recesses on flange, 90 spacing...
  • Page 105 ------ Stainless steel immersion electrodes 3 electrodes 40 980 055 1 electrode 40 980 056 Stainless steel wire rope for S 100D 15 m 42 200 727 30 m 42 204 021 Lightning protection with earthing terminal for -- 3~/ 400 V (supplied separately) ........
  • Page 106 60 Hz Accessories Electric Cable for Use in Drinking Water Applications Applications For use in water as standard short submersible motor cable (3- + 4-core, flat) and for use in air as extension cable from motor cable to control box / mains (3-core, flat and 4-core, round). Application Limits Rated voltage: -- U...
  • Page 107 60 Hz Accessories Maximum Permissible Rated Motor Current I a) Ambient temperature t ≤ + 30 in A for cross-section of ... mm Starting Used as ... D.o.l. Short motor cable (1 cable (1 cable Extension cable 2 cables in parallel Y-∆...
  • Page 108 60 Hz Accessories Permissible Cable Lengths L D.o.l. Starting (1 cable or 2 cables in parallel) U = 460 V ∆U = 3 % t ≤ + 30 in air laid along a surface! 70 mm = 250 A = 202 A 50 mm = 162 A 35 mm...
  • Page 109 60 Hz Accessories Permissible Cable Lengths L Y-∆ Starting (2 cables) U = 460 V = 433 A 70 mm ∆U = 3 % = 350 A 50 mm t ≤ + 30 in air laid along a surface! = 280 A 35 mm = 227 A 25 mm...
  • Page 110 60 Hz Accessories Connector for Electric Cable Applications Used to provide a sealed, water--tight connection between electric extension cable and short submersible motor cable. Supply voltage ... ≤ 750 V. Ambient temperature .
  • Page 111 60 Hz Accessories Cable Tie for Electric Cable Applications Securing electric cable at the riser / discharge pipe. Suitable for use in normal or slightly aggressive water. Models for use in more aggressive wasser (for ex. seawater) available on request. Selection Criteria Type, number and size of the electric cable, as well as nominal diameter and length of the riser / discharge pipe.
  • Page 112: Flow Velocity "V" Past The Motor

    Submersible borehole pumps 60 Hz Flow Velocity v Past the UMA Submersible Motor Depending on the general installation arrangement (i.e. depending, for example, on the ratio of outside motor diameter to inside well or shroud diameter, etc.) a distinction must be made between the following cases ... a) v = 0 m/s ...
  • Page 113 60 Hz Submersible borehole pumps...
  • Page 114 60 Hz Submersible Borehole Pumps...

Table of Contents