Handling Of Modules - ABB IRC5 with FlexPendant Operating Manual

5.3.2 Handling of modules

Overview
This section details how to handle program modules. i.e.:
Creating a new module
This section describes how to create a new module.
1
2
3
4
5
Operating manual - IRC5 with FlexPendant
3HAC050941-001 Revision: G
• create a new module
• load an existing module
• save a module
• rename a module
• delete a module
Action
On the ABB menu, tap Program Editor.
Tap Modules.
Tap File, then tap New Module.
en0400000688
Tap ABC... and use the soft keyboard to enter the new module's name. Then tap OK
to close the soft keyboard.
Select which type of module to be created:
• Program
• System
Then tap OK.
How to later switch between these types is detailed in section
on page 155.
© Copyright 2018 ABB. All rights reserved.
5 Programming and testing
5.3.2 Handling of modules
Changing type of module
Continues on next page
153