Draper 20582 Manual

Draper 20582 Manual

12v cordless air compressor
Hide thumbs Also See for 20582:

Advertisement

12V
CORDLESS
AIR COMPRESSOR
20582
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20582 and is the answer not in the manual?

Questions and answers

Summary of Contents for Draper 20582

  • Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
  • Page 2: Introduction

    Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.
  • Page 3: Table Of Contents

    CONTENTS 1. TITLE PAGE 1.1 INTRODUCTION......................2 1.2 REVISION HISTORY ....................2 1.3 UNDERSTANDING THIS MANUAL ................2 1.4 COPYRIGHT NOTICE ....................2 2. CONTENTS 2.1 CONTENTS ........................3 3. GUARANTEE 3.1 GUARANTEE ....................... 4 4. INTRODUCTION 4.1 SCOPE......................... 5 4.2 SPECIFICATION ......................
  • Page 4: Guarantee

    This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.
  • Page 5: Introduction

    Multi-functional compressor with light for the inflating of tyres, dinghies and sports equipment. Incorrect use of this 12V Air Compressor may result in personal injury or property damage. 4.2 SPECIFICATION Stock No..........................20582 Part No..........................DA12/151 Rated voltage ..........................12V Battery type ......................
  • Page 6: Health And Safety Information

    HEALTH AND SAFETY INFORMATION Have this tool repaired by a qualified person. This tool is designed to conform to the relevant international and local standards and as such should be maintained and repaired by someone qualified; using only original parts supplied by the manufacturer: This will ensure the tool remains safe to use.
  • Page 7: Power Tool Use And Care

    HEALTH AND SAFETY INFORMATION e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
  • Page 8: General Safety Instructions For Compressors

    Warning: Please read the following instructions carefully failure to do so could lead to serious personal injury. Important: Draper Tools recommends that this compressor should not be modified or used for any application other than that for which it was designed. If you are unsure of it’s relative applications do not hesitate to contact us in writing and we will advise you.
  • Page 9: Additional Safety Instructions For Your 12V Air Compressor

    HEALTH AND SAFETY INFORMATION 5.3 ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR 12V AIR COMPRESSOR This product is designed for occasional use. Inflation over a long period may over heat and cause damage to this product and potential harm to user. This product should not operate for more than 15 minutes at a time. After which it must be switched off for at least 15 minutes.
  • Page 10: Technical Description

    TECHNICAL DESCRIPTION 6.1 IDENTIFICATION SMD LED emergency light on/off switch. SMD LED emergency light Attachment lock. Pressure display. Trigger. Trigger lock. Battery release button. - 10 -...
  • Page 11: Unpacking And Checking

    Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Helpline (the telephone number appears on the Title page) and do not attempt to use the machine.
  • Page 12: Preparing The Compressor

    PREPARING THE COMPRESSOR 8.1 CHARGING THE BATTERY (230V MAINS) - FIGS. 1 & 2 Important: Charge for at least 3 hours before first use. Do NOT store battery inside unit when not in use. Remove the battery from the compressor by pressing locking tab and pulling battery downwards.
  • Page 13: Charging The Battery (12V Adaptor/Charger)

    PREPARING THE COMPRESSOR 8.2 CHARGING THE BATTERY (12V ADAPTOR/CHARGER) Unravel cord before use. Note: Be sure the cord runs through the hole at the base of the pack. FIG.4 If the battery is installed, remove from compressor as detailed in 8.1. FIG.5 Slide the 12V Adapter/Charger pack into compressor unit until it locks into place.
  • Page 14: Operation

    OPERATION 9.1 INFLATING TYRES Loosen the attachment lock approximately 3 rotations anticlockwise. Do not remove lock completely. Important: Insert the air hose with threaded connector into the attachment lock. Press in firmly while screwing in clockwise until it can go no further.
  • Page 15: Using The Lamp

    OPERATION 9.2 USING THE LAMP To switch the lamp on, press once to activate the 18 white SMD LED’s. Press again to activate the 18 red SMD LED’s. Press once more to activate the 18 red SMD LED’s in SOS form. To switch all lights off, press once again.
  • Page 16: Troubleshooting

    10. TROUBLESHOOTING 10.1 TROUBLESHOOTING GUIDE Fault Possible Causes Remedy Will not charge. 1a. Poor connection between 1a. Check connection. plug and 230V socket. 1b. Check connection. 1b. Poor connection between plug and 12V DC socket. Power supply fuse blown. Check cigarette lighter power supply fuse.
  • Page 17: Disposal

    11. DISPOSAL 11.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: ●...
  • Page 18: Explanation Of Symbols

    12. EXPLANATION OF SYMBOLS 12.1 EXPLANATION OF SYMBOLS Read the instruction manual. Class II construction (Double insulated). WEEE – Waste Electrical & Electronic Equipment. Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish. Lithium-ion product. Do not incinerate or throw onto fire.
  • Page 19 NOTES - 19 -...
  • Page 20 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

Table of Contents