Download
Share
Print this page
Draper DA25/190 Instructions Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Air Compressor
  5. DA25/190
  6. Instructions manual

Draper DA25/190 Instructions Manual

25 & 50 litre compressors
Hide thumbs

Advertisement

Quick Links

Download this manual
25 & 50 LITRE
COMPRESSORS
■ STOCK Nos. 77760
■ PART Nos.DA25/190
77759
DA50/190
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS TOOL.
01/2005

GENERAL INFORMATION

This manual has been compiled by Draper Tools and is an integrated part of the product with which it is enclosed
and should be kept with it for future references.
This manual describes the purpose for which the product has been designed and contains all the necessary
information to ensure its correct and safe use. We recommend that this manual is read before any operation or,
before performing any kind of adjustment to the product and prior to any maintenance tasks. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together with
longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.

Advertisement

loading
Need help?

Need help?

Do you have a question about the DA25/190 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Draper DA25/190

Summary of Contents for Draper DA25/190

  • Page 1: General Information

    01/2005 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the product with which it is enclosed and should be kept with it for future references. This manual describes the purpose for which the product has been designed and contains all the necessary information to ensure its correct and safe use.

  • Page 2: Declaration Of Conformity

    6 - 8 Maintenance 8 - 10 Troubleshooting DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock Nos:- 77759 & 77760. Part Nos:- DA50/190, DA25/190.
  • Page 3 This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the 12 month period.

  • Page 4: Power Supply

    (i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug fitted.
  • Page 5 IMPORTANT: Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you.
  • Page 6 GETTING TO KNOW YOUR COMPRESSOR (15) (10) (11) (12) (14) (13) DA50/190 Shown. (1) Air Receiver Tank (6) Motor (11) In-Line Pressure Gauge (2) Sump Bung (7) Overload Protection (12) Tank Pressure Gauge (3) Pump Unit (8) Safety Valve (13) Tank Bung (4) Dipstick/Oil Inlet (9) ON/OFF Switch (14) Tank Rating Plate...
  • Page 7 When starting the compressor for the first time, leave it running for about 10 minutes with the drain cock (A) open (Fig.3). DA25/190 does not have a tap. Instead, run for 10 minutes with a coupling inserted into the connector.
  • Page 8 OPERATION AND USE ADJUSTING THE PRESSURE SWITCH (Fig.5): Note: This is the only operation where it is acceptable to switch the compressor off without using the pressure switch. To decrease the pressure switch, run the compressor up to the desired capacity for the pressure switch to be set.
  • Page 9 Draper Stock No.51857 - Air Filter, Regulator & Lubricator. Draper Stock No.51858 - Air Filter & Regulator. To ensure an optimum air supply, please refer and carry out the following procedures as recommended.
  • Page 10 MAINTENANCE In order to keep your compressor in good working conditions, we recommend you to perform periodical servicing operations. Before performing any maintenance operation, switch off the compressor and ensure all air in the tank is released. OPERATIONS TO BE CARRIED OUT AFTER THE FIRST 50 WORKING HOURS: Check that all screws are properly tight, paying special care to the head and crank...
  • Page 11 MAINTENANCE It is advisable to clean all the finned parts of your compressor, so as to keep the cooling system efficient and to ensure a long work life to your machine. OPERATIONS TO BE CARRIED OUT EVERY 2 YEARS: Check the non-return valve and if necessary replace the seal.

  • Page 12: Troubleshooting

    TROUBLESHOOTING USE ONLY ORIGINAL SPARE PARTS, AVAILABLE AT ALL AUTHORIZED SERVICE CENTRES. FAULT POSSIBLE CAUSE REMEDY Pressure drop in tank Air leaks at connections Allow the compressor to reach max. pressure allowed. Switch it of and brush a soapy water solution onto all air connections.
  • Page 13 NOTES - 12 -...
  • Page 14 NOTES...
  • Page 15 NOTES...
  • Page 16 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

This manual is also suitable for:

Da50/1907776077759