Connect Weather Sensor (Optional); Connect Power - Rain Bird ESP-ME3 User Manual
Hide thumbs
Also See for ESP-ME3:
- Quick reference manual (2 pages) ,
- Advanced user's manual (19 pages) ,
- User manual
Table of Contents
Advertisement
Connect Weather Sensor (optional)
EN
A
Remove the yellow jumper wire from the SENSOR
terminals on the controller.
Do not remove the yellow jumper wire unless connecting a rain sensor.
B
Connect both rain sensor wires to the SENSOR
terminals as shown.
Do not route the rain sensor wires through the same opening as the
power wiring
NOTE: Rain Bird ESP-ME3 controllers are only
compatible with normally closed rain sensors.
NOTE: For wireless rain/freeze sensors, refer to
the sensor installation instructions.
Weather Sensor Settings
Set the controller to obey or ignore a weather sensor.
When set to Sensor ON, automatic irrigation will be
suspended if rainfall is detected. When set to Sensor
OFF all stations will ignore the rain sensor.
Turn the dial to Weather Sensors.
to select SENS ON (sensor on) or SENS
• Press
or
OFF (sensor off ).
Sensor ON
Sensor OFF
6
ESP-ME3 Controller
NOTICE
WARNING
B
Rain detected
(flashing)
Connect Power
WARNING
DO NOT plug in the transformer or connect external power until you
have completed and checked all wiring connections.
Installation with Pre-attached Cord
• Plug the attached power cord into a nearby 120VAC
electrical outlet.
V T MV COM
5 6 7
11 12 13
17 18 19
1 2 3 4
8 9 10
14 15 16
20 21 22
VT MV COM
1 2 3 4
V T
=
VA LV E T E S T
C ON NE CT
120 VA C
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ESP-ME3 and is the answer not in the manual?
Questions and answers
How do I hook up my system to my smart home
To connect your Rain Bird ESP-ME3 system to your smart home, follow these steps:
1. Download the latest Rain Bird mobile app from the App Store or Google Play.
2. Insert the LNK Wi-Fi module into the accessory port of your ESP-ME3 controller.
3. The module’s light should blink red and green, indicating it is broadcasting a Wi-Fi hotspot.
4. On your smartphone or tablet, open the Wi-Fi settings and connect to the network with "Rainbird" in the name.
5. Follow the app instructions to complete the setup and connect the controller to your home Wi-Fi network.
Ensure the controller has a strong Wi-Fi signal. If the signal is weak, move the router or controller closer or use a Wi-Fi booster.
This answer is automatically generated