Great Little Trading Paddington Midsleeper Manual

Great Little Trading Paddington Midsleeper Manual

Hide thumbs Also See for Paddington Midsleeper:

Advertisement

www.gltc.co.uk
www.gltc.co.uk
Paddington Midsleeper
Assembly Difficulty
two-person job
easy - medium -
hard
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you'll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.flatpackconstruction.co.uk.
A few important pointers before you start:
Please read the instructions right through before you start, and check
that all the components have been included in the pack; we find
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You'll find details of the
tools you need at the beginning of the instructions.
It's a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it's been assembled.
Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
V4
09/02/2017
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Paddington Midsleeper and is the answer not in the manual?

Questions and answers

Summary of Contents for Great Little Trading Paddington Midsleeper

  • Page 1 Hopefully our efforts will have been worthwhile and you’ll sail through Paddington Midsleeper the whole process. But if it all feels a bit too much like hard work, then we do have an assembly company we can recommend: the Flatpack Construction Company offers a nationwide service and can be contacted on 0843 289 4951 or www.flatpackconstruction.co.uk.
  • Page 2 Safety Warnings: Customer Service: • IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE. • If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLTC • This bed conforms to BS EN 747:2012 Parts1&2 +A1:2015 Customer Services on 0344 848 6000 immediately.
  • Page 3 Component Check List 2x RH Leg Side Panels 2x LH Leg Side Panels 2x Front Guard Rails 2x Rail Support Braces 2x RH Leg Front Panels 2x LH Leg Front Panels 1x LH Ladder Side 1x RH Ladder Side 2x Headboard Rails 2x Headboards 2x Tread Panels 1x Slat Set...
  • Page 4 Component Check List 32x Cover Caps 28x Wooden Dowels 20x Wooden Dowels 28x Screws 40mmL 35mmL 35mmL You will need (not supplied) 8x Bolts 24x Bolts 1x Allen Key Hammer 40mmL 50mmL You will need (not supplied) Phillips Head Screwdriver 8x Connecting Bolts 10x Barrel Nuts 80mmL...
  • Page 5 STEP 1: STEP 2: Take the 2x headboards F, 2x headboard rails E, 2x RH leg front panels C and 2x LH Build the two RH legs by securing one of the RH leg side panels A to one of the RH leg front panels D and insert the shorter wooden dowels (#1) into the edges of the leg front panels C using the bolts (#4).
  • Page 6 STEP 3: STEP 4: Assemble the bed end by locating one of the prepared headboards and headboard Secure these panels to the assembled legs using the shorter screws (#8). rails into the LH assembled leg. Once all 4 panels are in place locate the RH Repeat this for the second bed end.
  • Page 7 STEP 5: IMPORTANT: Take the 2x front guard rails I, 1x rear guard rail H and 2x side rails G and insert the Two people are required from this point forward. longer wooden dowels (#2) as shown. STEP 6: Hardware for Step 6: Attach the rear side rail G and guard rail H to one of the assembled bed ends using the connecting bolts and barrel nuts as shown.
  • Page 8 STEP 8: Locate the RH and LH ladder sides onto the front guard rails. STEP 7: Hardware for Step 7: Attach the front side rail G and 2x front guard rails I to the assembled bed ends using the connecting bolts and barrel nuts as shown.
  • Page 9 STEP 10: Secure the 2x tread panels M to the ladder sides with the longer bolts (#4). Tighten the bolts using the Allen key provided. Hardware for Step 9: 8x #3 Bolts STEP 9: Secure the ladder sides to the front guard rails using the shorter connecting bolts (#7) and barrel nuts (#6) Hardware for Step 10: as shown.
  • Page 10 Do not use the caps if children under 3 years have access to the bed as they could become a choking 4x #4 Bolts 28x #9 Screws 35mmL hazard. Copyright© 2016 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.

Table of Contents