Table of Contents
Advertisement
Quick Links
Sixpence Play Shop & Theatre
L4446
Assembly Difficulty
two-person job
easy -
medium
- hard
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone's
favourite way to spend their time, so we've tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you'll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.flatpackconstruction.co.uk.
A few important pointers before you start:
•
Please read the instructions right through before you start, and check
that all the components have been included in the pack; we find
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
•
Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You'll find details of the tools
you need at the beginning of the instructions.
•
Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
V1
20/08/2018
1
Advertisement
Table of Contents
Related Manuals for Great Little Trading Sixpence Play Shop & Theatre L4446
Summary of Contents for Great Little Trading Sixpence Play Shop & Theatre L4446
- Page 1 Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone’s favourite way to spend their time, so we’ve tried to make assembling this item as quick and painless as possible. Hopefully our efforts will have been worthwhile and you’ll sail through the whole process.
- Page 2 Safety Warnings: Customer Service: • If you find that any components are missing or damaged, please do • Warning: Not suitable for children under 3 years due to small parts not begin assembly and do not use the item. Please contact GLTC which may become detached an present a choking hazard.
- Page 3 Component Check List 3x Rods Please note that x1 rod is shorter than the other 2. The shorter rod is for the curtain rail, you can identify this rod as its the only rod with no pre drilled holes at each end. 1x Headboard 1x Left Side Panel 1x Right Side Panel...
- Page 4 Component Check List 10x Cam Dowels 10x Cam Locks 35mmL 14mm Diameter 2x Curtains & Tie Backs 1x Canopy 12x Wooden Dowels 8x Screws 20mmL 12mmL Allen Key You will need (not supplied) You will need (not supplied) 34x Screws 10x Screws 16mmL 35mmL...
- Page 5 STEP 1: STEP 2: Attach the 4x castors (#9) to the base panel (C) using the 4x medium screws (#5) per castor. STEP 1: Hardware for Step 1: Lie panels A and B down with drill holes facing up. Starting with the right hand panel (A), insert 5x cam dowels (#1) and secure 1x pole cradle (#8) 10x #1Cam Dowels using x1 medium screw (#5) as shown above.
- Page 6 STEP 3: STEP 4: Attach the 2x magnetic door catches to panel C using 4x short screws (#4). Attach the hinges to cupboard door panels G and H using 4x medium screws (#5) on each door. It is important the hinges are attached to the panels as shown below.
- Page 7 The help of a second STEP 5: person may make this step easier. Attach the counter (F) to side panel (B) using 2x cam locks (#2). Turn cam STEP 6: locks clockwise to lock. With the help of a second person attach the middle shelf (D) to side panel (B) using 2x long screws (#6).
- Page 8 STEP 7: STEP 8: Attach the bottom shelf (E) to side panel (B) using 2x long screws (#6). Please Insert 4x cam locks (#2) into the holes on panel C as shown below, the arrows use the allen key provided to tighten the screws. on the cam locks should point towards the holes on the edge.
- Page 9 STEP 10: STEP 9: With the help of a second person. Carefully turn the structure on its side, as Attach rod (J) to side panel B using using 1x long screw (#6). Please use the shown below. This makes attaching the head board (I) easier. allen key provided to tighten the screws.
- Page 10 STEP 12: STEP 11: Slide chalkboard panel (K) into the groove on the top side of panel C and the Slide chalkboard panel (L) into the groove on the underside of panel F and the inside of panel B. The panel should rest against shelf E when inserted. inside of panel B.
- Page 11 STEP 13: STEP 14: Slide rod (J) into the canopy as shown below. Slide the partially assembled canopy into place whilst ensuring that the 3 loops are slid through the fixed rod from step 10. Please ensure the x3 loops all slide over the rod. When selecting the rod.
- Page 12 STEP 15: STEP 16: Insert 2x cam locks (#2) into panel F, the arrows on the cam locks should point Carefully position panel A over the partial assembled unit. Carefully ensure all of the towards the hole on the top edge. Now insert 1x cam lock (#2) into panel I, ensuring cam dowels, wooden dowels and rods fit into the right holes.
- Page 13 STEP 17: STEP 18: Secure shelves (D and E) and rod (J) to panel A using 5x long screws (#6). Attach the right hand door (H) to side panel (B) using 4x medium screws (#5). Please use the allen key provided to tighten the screws. The help of a second person may make this step easier.
- Page 14 STEP 19: STEP 20: Attach the left hand door (G) to side panel (B) using 4x medium screws (#5). Slide the curtains and pole cradle covers (#7) over the currtain rod (J). The help of a second person may make this step easier.
- Page 15 A and B. Once the pole is in positon. Slide the pole cradle covers outwards so they cover the pole cradles. Copyright© 2018 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Need help?
Do you have a question about the Sixpence Play Shop & Theatre L4446 and is the answer not in the manual?
Questions and answers