Table of Contents
Advertisement
D.1.2 6300ESB (Hance Rapids) ICH Chipset Software Installation
1. If not already present, insert the Windows Drivers CD‐ROM.
2. Click Start, Run, Browse.
Select the CD‐ROM drive in the Look in pull‐down selection menu.
Double‐click on the Hance Rapids folder.
Double‐click on the Applications folder.
Double‐click on infinst_enu.
Click OK.
3. Click Next at the Intel Chipset Software Installation Utility window.
Click Yes to agree to the software license agreement.
Click Next.
Click Continue Anyway at each of the following Hardware Installation win‐
dows.
4. Ensure Yes, I want to restart my computer now is selected.
Click Finish. The computer will restart.
D.1.3 USB 2.0 EHCI Host Controller
Depending on how the operating system and the latest service pack were
installed, the USB 2.0 controller driver may or may not be running.
Visit http://support.microsoft.com and search for Availability of USB 2.0 Support
in Windows 2000 SP1, for more information on this topic.
To determine whether the driver for the USB 2.0 controller is running:
1. Right‐click on My Computer and select Manage.
2. Click on Device Manager in the left pane of the Computer Management win‐
dow.
+
3. Click on the '
' next to Universal Serial Bus controllers in the right pane to
expand the group. If there is a Standard Enhanced PCI to USB Host Controller
listed in the group, the USB 2.0 EHCI Host Controller driver is already run‐
ning, and no further configuration is necessary for the device.
If there is a device labeled Universal Serial Bus (USB) controller under the Other
devices section in the right pane of the Computer Management window, the driver
has not been installed.
To install the driver:
1. Right‐click on the Universal Serial Bus (USB) controller and select Proper‐
ties from the drop‐down menu.
2. Select the Driver tab and select Update Driver.
3. When the wizard starts, choose Next and Search for a suitable driver and
Next again. The Hardware Update Wizard will find the appropriate driver
and begin installation automatically.
4. Click Next as necessary.
5. Click Finish and Close to close the drivers properties dialog box. Device
Manager will relocate the device to the Universal Serial Bus controllers section
in the right pane.
Appendix D: System Driver Software 70
Hide quick links:
Advertisement
Table of Contents
