C.2 BIOS Features Setup
C.1.2 Boot Menu
The second method of enabling the Boot from LAN BIOS option is to press the
key during system boot. This will access the BIOS Setup Utility. Advance to
DEL
the Boot menu, and to the Boot Device Priority sub‐menu. Use the arrow keys to
highlight the Network: IBA GE slot option. Repeat entering <+> until the desired
network port is at the top of the list.
Advance to the Exit menu, select Exit Saving Changes and press
system prompts for confirmation, press Yes. The computer will then restart the
system bootup. The system will boot from this connection until it is changed in
the BIOS setup utility.
Table C-2 Boot-From-LAN BIOS Boot Menu
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
After the Intel Boot Agent has been enabled, the following information will
appear at the top of the screen.
Initializing Intel (R) Boot Agent GE v1.2.40
PXE 2.1 Build 085 (WfM2.0)
Press Ctrl+S to enter Setup Menu...
Once you press CTRL-S, the Boot Agent setup menu will appear. PXE is the boot
option available on the VMIVME‐7807/VME‐7807RC. You can change the settings
for the Setup Prompt and Setup Menu Wait Time. You can either enable or disable
the prompt, and you can set the amount of wait time for the setup menu.
Network Boot Protocol
Boot Order
Show Setup Prompt
Setup Menu Wait Timer
Once the configuration is set, the SBC will begin to establish the new link.
Initializing Intel (R) Boot Agent GE v1.2.40
Copyright (C) 1997-2006, Intel Corporation
Initializing and establishing link...
BIOS SETUP UTILITY
Boot
[MBA UNDI (Bus2 Slot5)]
[1st Floppy Drive]
[Hard Drive]
PXE (Preboot eXecution Environment)
Use BIOS Setup Boot Order
Enabled
2 Seconds
. When the
ENTER
Specifies the boot
sequence from the
available devices.
←→
Select Screen
↑↓
Select Item
+-
Go to Sub Screen
F1
General Help
F10
Save and Exit
ESC
Exit
Appendix C: Remote Booting 68