Table of Contents
Advertisement
4.11 RETURNING TO THE HOME SCREEN
Press the "HOME" Icon at the top left of the screen to display the "HOME" screen.
4.12 CHANGING OPERATOR
If 2 or more operators have been defined during the installation, then the "Active" operator can log-off by
pressing on the "CHANGE USER" Icon on at the top of the screen (2nd Icon from the left) to display the
"LOGIN" screen. Another operator can now "LOGIN" using the defined User Name and Password.
Note that the "HOME" screen has 4 Icons along the top if the operator is defined as a Supervisor, but only 2
Icons along the top if the operator is defined as a User, i.e. this operator has restricted access rights.
Home Screen for a Supervisor
Home Screen for a User
Note that a "User" can select tests and perform tests but cannot create a new test, edit a test or change
any program or machine settings. For additional security, a "User" won't be able to exit into Windows
as the "X" button is disable.
CS User Manual 25
Advertisement
Table of Contents
Need help?
Do you have a question about the CS2-225 and is the answer not in the manual?
Questions and answers
Hi there! I was wondering how to set the computer so it has a user interface so the user doesn't have to keep setting the parameters. For example if the test is always being run at 0.5in/sec and 4in in distance, how can I set the interface up?
To set up the Ametek CS2-225 to automatically run tests at 0.5 in/sec and 4 in distance:
1. Go to the "LIMITS" screen by pressing "OK" after the basic settings are set.
2. Set the Test Speed:
- Press the "TEST SPEED" entry field.
- Enter 0.5 using the keypad, then press ENTER.
- Change the unit to inches per second (in/sec) using the button next to the entry field.
3. Set the test to stop at a distance:
- Select the "DISTANCE" option as the stop method.
- Press the relevant distance entry field.
- Enter 4 using the keypad, then press ENTER.
This configures the test to automatically run at 0.5 in/sec until it reaches a distance of 4 inches.
This answer is automatically generated