Ametek CS2-225 User Manual page 109

Force tester
Table of Contents

Advertisement

SPK-CS2-1100 Sheet A
SPK-CS2-1100 Sheet B
CS User Manual 109

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS2-225 and is the answer not in the manual?

Questions and answers

Mikayla Schmidt
April 10, 2025

Hi there! I was wondering how to set the computer so it has a user interface so the user doesn't have to keep setting the parameters. For example if the test is always being run at 0.5in/sec and 4in in distance, how can I set the interface up?

1 comments:
Mr. Anderson
April 10, 2025

To set up the Ametek CS2-225 to automatically run tests at 0.5 in/sec and 4 in distance:

1. Go to the "LIMITS" screen by pressing "OK" after the basic settings are set.
2. Set the Test Speed:
- Press the "TEST SPEED" entry field.
- Enter 0.5 using the keypad, then press ENTER.
- Change the unit to inches per second (in/sec) using the button next to the entry field.
3. Set the test to stop at a distance:
- Select the "DISTANCE" option as the stop method.
- Press the relevant distance entry field.
- Enter 4 using the keypad, then press ENTER.

This configures the test to automatically run at 0.5 in/sec until it reaches a distance of 4 inches.

This answer is automatically generated

This manual is also suitable for:

Cs2-1100

Table of Contents