Using The Service Application - Yamaha CS-700 Operation Manual

Using the Service Application

The service application supports similar functionality to the web user interface.
However, in some areas it supports less, e.g. in network management, while in
others it supports more, e.g. in video control. See the following sections for the
supported functionality in the service application.
Start-up
When starting the service application, a start-up window will be displayed. On
the bottom of the application window the current status of the USB connection
is displayed.
If a CS-700 device is connected and detected no an USB connection, the service
application will request the password to access the system. The password is
the same as used for any user interface and factory preset to 7386.
58