Telnet / Ip Interface; Usb/Telnet Cli Commands - Yamaha CS-700 Operation Manual

Telnet / IP interface

To use an IP connection for the control, with the CS-700 being the server, the
"Enable telnet access" check box on the Admin Settings page of the web UI has
to be checked.
Start the telnet connection by connecting to the IP address of the CS-700 unit,
providing the standard Telnet port number 23. The username is roomcontrol
and the password is Yamaha-CS-700, both case sensitive. Once connected,
CLI commands as listed in the next section can be sent to the CS-700.

USB/Telnet CLI Commands

Below a subset of the available commands is listed including the properties,
status items and parameters that are available. Notifications are identified with
their corresponding property or status item. Examples for using these
commands with the CLI are provided.
The command syntax is as follows:
<parameter>
<"call-status">
<0|1|2>
<connected|disconnected>
Items in angle brackets are parameters
A quoted item represents the name of a parameter further described
in the Parameters section.
A list of possible values are separated by vertical bars.
An unquoted parameter is a literal value.
104