Use Of Controls - ABB C1900 Operating Manual

...3 DISPLAYS & CONTROLS
3.2 Use of Controls – Fig. 3.2(a) to (f)
Page 1
Frame 1
Frame 2
Frame 3
Return from
Frame 4
any frame
Fig. 3.2(a) Advancing to Next Page
Advance to
next Frame
Fig. 3.2(b) Moving Between Parameters
Parameter Value
Note. Continued pressure on the
causes the rate of change of the displayed value to
increase. To make small adjustments operate the keys
momentarily.
Fig. 3.2(c) Adjusting a Parameter Value
Parameter X
Note. Continued pressure on the
causes the rate of change of the displayed value to
increase. To make small adjustments operate the keys
momentarily.
Fig. 3.2(d) Selecting a Parameter Choice
6
Page 2
Frame 1
Frame 2
Frame 3
Page X
Frame 1
Frame 2
Frame 3
Frame 4
Adjust
and keys
Y
Select
Z
and keys
Lift/Lower pen on alternate operations
Notes.
• The key can be enabled or disabled in the
,
Chart Page BASIC CONFIGURATION LEVEL
• If ' ' has been selected in the
Auto Pen Lift Drop
, the pens return automatically to their
Chart Page
operating positions after a five minute delay.
Fig. 3.2(e) Lifting/Lowering the Pens
Information. The key is programmed in the
Function Keys Page, ADVANCED CONFIGURATION
LEVEL.
Acknowledge all alarms
Return operator to top of
Op. Page Page X
Parameter 1 Parameter 1
Parameter 2 Parameter 2
Note. The key returns the instrument display to the
start of the operating page only when the display is at
the top of any page.
Fig. 3.2(f) Selecting Programmable Functions
Set Up
.
Set Up
Set Up
or
.
Operating Page
Page X
Parameter 1
Parameter 2