Table of Contents
Advertisement
Com port setting
USA/INT/CAN
RADIO SETUP
GPS/DATA
WATCH MODE
DSC SETUP
WX ALERT
>RADIO SETUP
>COM PORT
Reset to factory defaults
USA/INT/CAN
RADIO SETUP
GPS/DATA
WX ALERT
DSC SETUP
COM PORT
>RADIO SETUP
>RESET
CHECKSUM
ENT>ON
ESC>OFF
If you have a group of boat instruments that
communicate with each other using NMEA
protocol, you can add the radio to the group.
1. Scroll through the radio menu until RADIO
SETUP is displayed.
2. Move the cursor to RADIO SETUP and press
>ENT.
RESET RADIO
ARE YOU SURE
ENT>YES
ESC>NO
You can reset the radio back to the following
factory defaults:
Time offset:
00.00
Time format:
24 hour clock
Time display:
On
LL display:
On
GPS alert:
Off (USA), On (Europe)
Individual reply:
Manual
LL reply:
Manual
WX alert:
On
Contrast:
8
Priority channel: CH16
Watch mode:
CH16
Your buddy list and group list are not deleted
when you reset the radio.
3. Move the cursor to COM PORT then press
>ENT.
4. Press >ENT again to select CHECKSUM ON
and have the radio communicate with the
other instruments through NMEA protocol.
Some older intruments may need CHECKSUM
to be set OFF, so they can access GPS data.
1. Scroll through the radio menu until RADIO
SETUP is displayed.
2. Move the cursor to RADIO SETUP and press
>ENT.
3. Scroll through the RADIO SETUP menu until
the cursor is next to RESET then press >ENT.
4. The radio asks you to reconfirm that you really
want to reset to the factory defaults. Press
>ENT to reset the radio
OR
press <ESC to keep all your preferences.
33
Advertisement
Table of Contents
