Edit Or Delete A Channel Name; Set The Contrast - NorthStar NS100 SS Quickstart Manual And Reference Manual

Edit or delete a channel name

USA/INT/CAN RADIO SETUP
GPS/DATA >CH NAME
DSC SETUP CONTRAST
>RADIO SETUP WATCH MODE

Set the contrast

USA/INT/CAN RADIO SETUP
GPS/DATA CH NAME
DSC SETUP >CONTRAST
>RADIO SETUP WATCH MODE
CH NAME TELEPHONE
>TELEPHONE >EDIT
DELETE
The channel banks are listed in Appendix C with
their default names. You can edit the individual
channel names or delete them.
1. Scroll through the radio menu until RADIO
SETUP is displayed.
2. Move the cursor to RADIO SETUP and press
>ENT.
3. Press >ENT again to select CH NAME.
4. Use ^CH/SELv to select the channel and
display the associated name tag, then press
>ENT.
The LCD screen shows the existing channel
name and invites you to edit or delete it.
CONTRAST
LO HI
You can adjust the contrast on the LCD screen
to suit your own preference. There is a choice
of 16 contrast levels.
1. Scroll through the radio menu until RADIO
SETUP is displayed.
2. Move the cursor to RADIO SETUP and press
>ENT.
3. Move the cursor to CONTRAST and press
EDIT CH NAME EDIT CH NAME
TELEPHONE PHONE AAAA
ENT>YES
ESC>NO
5. Press >ENT to edit the channel name and
then enter the new name over the existing
name. It can be a maximum of 12 characters.
(In this example, TELEPHONE is changed to
PHONE AAAA.)
OR
move the cursor to DELETE and then press
>ENT to delete the existing name. In this case,
no name will be displayed on the LCD screen
when the channel is operational.
6. Press >ENT again to confirm the new channel
name or deletion.
>ENT.
4. Use ^CH/SEL or CH/SELv to increase or
decrease the contrast to the desired level.
The lowest contrast levels 1 thru 3 are all
shown by one bar only on the LCD screen.
The highest contrast levels 14 thru 16 are all
shown by 12 bars on the LCD screen. The
example here indicates contrast level 6.
31