Table of Contents
Advertisement
Select the channel bank
BUDDY LIST
CH SELECT
LOCAL/DIS
>USA
>USA/INT/CAN
INT
GPS/DATA
CAN
This option is not
available in Europe
because the channel
bank is preset to INT
(international).
Set your position and time manually
BUDDY LIST
GPS/DATA
LOCAL/DIS
>MANUAL
USA/INT/CAN
SETTING
>GPS/DATA
In the USA and Canada, a choice of 3 channel
banks is available;
• USA
• INT (International)
• CAN (Canadian).
Appendix C shows the channel bank details.
1. Move the cursor to USA/INT/CAN and press
>ENT.
MANUAL LL
N __`__.__`
E___`__.__`
MAN --:--UTC
If your boat has an operational GPS navigation
receiver, the radio automatically detects and
updates the vessel position and the local time.
However, if the GPS navigation receiver is
disconnected or absent, you can specify your
boat's position and the local time manually,
using the GPS/DATA menu option. This
information is important because it will be used
if you transmit a DSC DISTRESS call.
1. Move the cursor to GPS/DATA and press
>ENT.
2. Move the cursor to MANUAL and press
>ENT.
2. Press >ENT again to select the USA channel
bank
OR
move the cursor to INT or CAN and then
press >ENT.
Depending on your selection, USA, INT or CAN
will be shown on the LCD screen.
4. Enter your latitude and press >ENT. Enter
your longitude and press >ENT.
5. Enter your local time in UTC format; e.g. if
the local time is 1715 and you are 3.5 hours
behind UTC, enter the time as 2045. A world
time chart is shown for your information.
6. Press >ENT when all the information is
correct.
The vessel's latitude and longitude are shown
on the LCD screen, with the UTC time. The
prefix MAN indicates a manual entry.
If a real GPS position is received, your manual
entries are cancelled and MAN disappears off
the LCD screen.
27
Advertisement
Table of Contents
