Connection Via Ppu (Only 828D) - Siemens SINUMERIK Series Function Manual

3.10.2

Connection via PPU (only 828D)

Parameter assignment
Handwheels directly connected to terminal X143 of the PPU are parameterized using the
following NCK machine data:
● MD11350 $MN_HANDWHEEL_SEGMENT[<
● MD11351 $MN_HANDWHEEL_MODULE[<
● MD11352 $MN_HANDWHEEL_INPUT[<
Example
Parameter assignment of two handwheels connected via terminal X143 of the PPU.
Machine data
MD11350 $MN_HANDWHEEL_SEGMENT[0]
MD11351 $MN_HANDWHEEL_MODULE[0]
MD11352 $MN_HANDWHEEL_INPUT[0]
MD11350 $MN_HANDWHEEL_SEGMENT[1]
MD11351 $MN_HANDWHEEL_MODULE[1]
MD11352 $MN_HANDWHEEL_INPUT[1]
Extended Functions
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
When directly connected to the PPU, a 2 (8xxD_HW) must always be entered as
handwheel segment.
When directly connected to the PPU, a 1 must always be entered.
connection
>
The number of the handwheel has to be entered: 1 or 2
Note
Two handwheels can be connected to a PPU (terminal X143).
H1: Manual and handwheel travel
Handwheel_No._in_NCK - 1
Handwheel_No._in_NCK - 1
Handwheel_No_in_NCK - 1
Value Meaning
1st handwheel:
2 Hardware segment: 8xxD_HW
1 ---
1 1st handwheel connection of X143
2nd handwheel:
2 Hardware segment: 8xxD_HW
1 ---
2 2nd handwheel connection of X143
3.10 Start-up: Handwheels
>] = 2
>] = 1
Handwheel
>] = <
201