Testing; Sample Baseline Package Customization - Motorola SB1 Integrator Manual

Testing

To test an application on the SB1:
Install a Developer Back Housing onto the SB1. See
1.
information.
Connect the SB1 to a workstation using a micro USB cable. Ensure that the UserDrive folder can be
2.
accessed on the workstation.
Copy the baseline content to the config and/or apps folders on the SB1.
3.
Copy the application content (under the apps folder) to the SB1 apps folder.
4.
Copy the simple apps.json file for the application to the SB1 config folder.
5.
Disconnect the micro USB cable.
6.
Reboot the SB1 by pressing and holding the Scan and Home buttons for about five seconds until a beep is
7.
heard.
Touch the application icon in the Applications screen and test the application functionality.
8.
Modify application content and repeat above the steps until behavior is acceptable.
9.

Sample Baseline Package Customization

The Sample Baseline package is provided to a sample package to create new packages from. To customize
the Sample Baseline package:
Locate the sample Sb1SampleBasline.apf package file in the folder to which you extracted the MSP
1.
4.2 Supplement for SB1.
Using the MSP Package Builder, open the sb1samplebasline.apf package file.
2.
Select Tools > Convert to Project.
3.
Enter a name for the new package.
4.
Enter the location for the new package project file (.MSPPROJ) and the extracted content files.
5.
Select OK.
6.
Select File > Save to save the new package project file.
7.
Modify the files in the folder to which the sample package content files were extracted based on application
8.
requirements and by following the SB1 Programmer's Guide.
Open the package project file in MSP Package Builder.
9.
Select the Files section of the project and delete the UserDrive folder.
10.
Drag the UserDrive folder into the Client File System pane of the project.
11.
Select File > Save to save the modified package project file.
12.
Select Tools > Generate APF File to make a package file containing the modified content.
13.
Enter a package version number.
14.
Staging and Deployment 4 - 11
Developer Back Housing on page 2-12
for more