For Use By Device Deployers - Motorola SB1 Integrator Manual

For Use by Device Deployers

lists specific packages for use by device deployers.
Table 4-7
Packages for Use by Device Developers
Table 4-7
Package Name
EndUpdateInProgress
RebootEnableOverride
SB1SaveCalibration
SB1WipeCalibration
Sb1PrepareForOsUpdate
UpdateInProgress
1 2
WipeUserDrive
1
FinishStaging
1
Package is used during staging of the SB1.
2
Package can be used when MSP is managing the SB1.
Source
MSP 4.2 Supplement
1 2
for SB1
MSP 4.2 Supplement
1 2
for SB1
MSP 4.2 Supplement
1 2
for SB1
MSP 4.2 Supplement
1 2
for SB1
MSP 4.2 Supplement
1 2
for SB1
MSP 4.2 Supplement
1 2
for SB1
MSP 4.2 Supplement
for SB1
MSP 4.2 Supplement
for SB1
Staging and Deployment
Description
Reverses the effects of UpdateInProgress.
Required after an update if UpdateInProgress was
used.
Required in a bundle just before the abup30
Package to allow it to work when warm boot is not
supported.
Required once after calibration and before cold boot
if it is desired to prevent the need to recalibrate.
Reverses the effect of the SB1SaveCalibration
package.
Prepares the SB1 for OS Update. Required before
any OSUpdate package to allow the update to work
correctly.
Informs the user that an update is in progress and
block the starting of new applications.
Can optionally be used in a bundle before non-OS
Update Packages.
Wipes the contents of the UserDrive folder. Optional
to revert the SB1 back to the factory default (empty)
state and restore the default behavior of the SB1
Shell.
Optional to suppress the "Your Device is Ready to
Use" message after staging is complete.
4 - 9