Table of Contents
Advertisement
3 - 20 SB1 Integrator Guide
Supported WLAN Options (Continued)
Table 3-11
Options
System Options
Auto PAC Settings
IPv6
Profile Roaming - if this is selected, profiles will be searched for an
available network. By default, this is enabled.
Enable IPv4 Management - When enabled, IPv4 address management
is performed by Fusion instead of by the Operating System. By default,
this is enabled.
Auto Time Config - If enabled, Fusion will update the time on the terminal
provided a Network Time Protocol server is available and the
Symbol/Motorola access point is enabled for this feature. By default, Auto
Time Config is enabled.
Allow Provisioning - If this is allowed, and no PAC is available, device
will allow server to provide one. This is disabled by default.
Allow Refreshing - If this is allowed, and the available PAC has expired,
the device will allow the Server to provide a new one. This is disabled by
default.
Enable IPv6 - if enabled, IPv6 stack will be enabled. By default, IPv6 is
disabled.
Description
Advertisement
Table of Contents
