Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Schlage Encode
Summary of Contents for Schlage Encode
- Page 1 Quick Start Guide...
- Page 2 Parts Backup Backplate Battery Touchscreen Cover Assembly Inside Assembly Strike Reinforcement Bolt Plate Backplate Reinforcement Screws Screws Bolt/Strike Inside Assembly Screws Screws...
- Page 3 Start here! schlage.com/encode-workswith Visit schlage.com/encode-workswith to setup and control your with your smartphone.
- Page 4 Touchscreen Programming and Input Communication Icon • Flashes when lock is connecting to WiFi to check for updates. • Flashes white on every digit that is entered. Low Battery Icon • Amber when using manual programming mode. • Flashes after code is entered when battery is low.
- Page 5 Don’t use a power drill! step Remove existing lock. Remove the entire deadbolt, including the bolt. You may also want to remove the strike. A standard Schlage deadbolt is shown. Check with your specific deadbolt manufacturer if you need help.
- Page 6 Need Help? Visit schlage.com/faqs-encode. Install the bolt. You may have to adjust your bolt length. Make sure the slot in the bolt is centered in the hole. Slot is Make sure the centered word “TOP” is in the hole.
- Page 7 Need Help? Trouble installing the strike reinforcer? Visit schlage.com/faqs-encode and follow interactive instructions. Install the strike into the door frame. If you have a window next to your door, you may not be able to use the longer wood screws to install the reinforcer.
- Page 8 Is the tailpiece not installing correctly? If your through hole seems too small, you may need to remove the spacer. Visit schlage.com/faqs-encode. Install the touchscreen. Route the cable through the door BELOW the bolt. Align the tailpiece as shown and push the touchscreen onto the door.
- Page 9 step Phillips screwdriver Don’t use a power drill! You may damage your lock! Install the backplate. Route the cable under the bolt and through the hole on the bottom of the backplate. Secure the backplate with screws. Make sure the outside touchscreen is straight before tightening screws all the way.
- Page 10 step Connect the cable. Tuck the cable and connector in the space above the spindle.
- Page 11 step Phillips screwdriver Don’t use a power drill! You may damage your lock! Secure the lock to the door. If the bump on the tailpiece doesn’t align with the slot in the back of the inside assembly, make sure your thumbturn is vertical (up and down).
- Page 12 step Install batteries and slide the cover on. Pull out battery Install holder. batteries. Reinstall battery holder. Turn the battery holder around so the batteries face the door.
- Page 13 If the bolt 3. Make sure the bolt retracts doesn’t smoothly. extend or 4. Open your door. retract during testing,visit 5. Extend the bolt using the schlage.com/ inside thumbturn. faqs-encode. 6. Now enter a user code at the touchscreen.
- Page 14 Visit schlage.com/encode-workswith for a list of compatible smart home apps that allow you to control your with your smartphone.
- Page 15 Lock and unlock To lock your door just tap the lock icon. You can also lock your door from inside by turning the thumbturn toward the door edge. To unlock your door enter a user code. You can also unlock your door from inside by turning the thumbturn away from the door edge.
- Page 16 Questions about your new Smart WiFi Deadbolt? Please don’t return it to the store! Let us help you first! www.schlage.com/faqs-encode *P518-415* © Allegion 2018 Printed in U.S.A. P518-415 Rev. 08/18-d P518-415...
Need help?
Do you have a question about the Encode and is the answer not in the manual?
Questions and answers
Don't how how to use
To use the Schlage Encode Smart WiFi Deadbolt, you can lock and unlock it using a user code. If a wrong user code is entered, the “X” symbol will flash. For additional help, visit the Schlage support website.
This answer is automatically generated