Blower/Fan Assembly - Mitsubishi Electric M Series Service Manual

13-4. Blower/Fan Assembly

Exercise caution when removing heavy parts.
1. Remove the Blower and Filter panel (along
with
filter if installed) indicated in section 2.
2. Remove the (1 or 2) brackets that secure the
coil assembly.
3. Remove the door that covers the small enclosure
attached to the fan assembly (Fig.12).
Unplug the motor and route the wire harness out
of the enclosure.
4. Remove the (2) screws that secure the fan
assembly and slide out.
Fig. 11
Fig. 12
43
© 2016 Mitsubishi Electric US, Inc.