Coil Assembly - Mitsubishi Electric M Series Service Manual

13-3. Coil Assembly

Exercise caution when removing heavy parts.
1. Remove the Electrical, Blower and Filter panel
indicated in sections 1 and 2.
2. Remove the Coil panel by removing all of the
screws securing it to the (3) smaller panels for
refrigerant and drain lines.
3. Slide the smaller panels in the directions indicated
and remove.
4 Remove the (1 or 2) brackets that secure the
coil, unplug the thermistors from the control
board and route the wires out of the control box
area and into the coil section. Next, slide the
coil from the frame.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
41
© 2016 Mitsubishi Electric US, Inc.