Fig. 29: Read/Write Parameter Groups And Parameters - Pfeiffer Vacuum TPG 361 Operating Instructions Manual

Measurement mode
Power on
Fig. 29: Read/write parameter groups and parameters
Change parameters
1. Press the "Parameter" button to switch to parameter mode.
– The display shows the respective parameter group instead of the bar graph. The symbol for
Parameter mode lights up.
2. Press the "UP" and "DOWN" arrow buttons to select a parameter group.
3. Press the "Parameter" button to confirm the parameter group.
4. Read the parameters of the selected parameter group using the "UP" and "DOWN" arrow buttons.
5. Press the "Parameter" button to confirm the desired parameter.
– The value flashes and you can now change it.
6. Use the "UP" and "DOWN" arrow buttons to change the value.
7. Press the "Parameter" button to save the change.
– You then return to read mode.
Parameter
group
<
>10 s
>10 s
Operation
Display
parameter parameter
<
Edit
39/72