Table 2-7 Pa-2Daid Lamp Indication Reference Table - NEC NEAX 2400 ICS Manual

LAMP INDICATIONS:
• Table 2-7 shows the lamp indications.
LAMP NAME COLOR
OPE1 Green
OPE0 Green
LINK1 Green
LB1 Red
ALM1 Red
RM/BLU1 Red
PALM1 Red
LINK0 Green
LB0 Red
ALM0 Red
RM/BLU0 Red
PALM0 Red
BL Green
BL0 – BL7 Red
CHAPTER 2
Page 22
Revision CD 1.0

Table 2-7 PA-2DAID Lamp Indication Reference Table

Indicates that the No. 1 circuit is operating normally.
Indicates that the No. 0 circuit is operating normally.
Indicates that a signal link with the DRU is established.
Indicates that a loop-back test is in progress.
Indicates that a CRC error, PCM loss, frame alignment loss, or
multi frame alignment loss has been detected.
Indicates that the DRU has detected a frame loss and it has been
alerted from the remote office as an remote office alarm or de-
tecting a blue signal from the DRU.
Power supply to Analog PB TEL/D
one circuit among No. 0 through No. 29 circuits.
Indicates that a signal link with the DRU is established.
Indicates that a loop-back test is in progress.
Indicates that a CRC error, PCM loss, frame alignment loss, or
multi frame alignment loss has been detected.
Indicates that the DRU has detected a frame loss and it has been
alerted from the remote office as an remote office alarm or de-
tecting a blue signal from the DRU.
Power supply to Analog PB TEL/D
one circuit among No. 0 through No. 29 circuits.
Indicates that more than one circuit of No. 0 through No. 29 cir-
cuit is used.
(1) When lit, indicates that the corresponding circuit is in ac-
tive state.
(2) When flickering, indicates that the corresponding circuit
is in Make Busy state or there is no system data available
for that circuit.
ND-45383 (E)
STATE
term
is abnormal at more than
term
is abnormal at more than
REMARKS
for No. 1 DLI
for No. 0 DLI
Lamp Number can be
changed via switch setting
on the circuit card.