Neo:6 Mode - Samsung HT-AS710 Instruction Manual

NEO:6 mode

You can play back 2 channel sound over 6.1 channel when enjoying music or a movie.
REMOTE CONTROL
Press NEO:6 MODE button.
• Each time you press this button, MUSIC
To set sound image of centre speaker
If TV (or screen) is installed high on a wall, you can raise the sound image
of the centre speaker to compensate.
1
2
3
To exit setup mode
Wait for about 5 seconds or press SETUP/MENU button.
•
"SETUP OFF" appears on the display and Setup Mode is exited.
NEO : 6 Mode
This mode decodes 2 channel signals to high precision digital matrix decoder.
DTS NEO:6 decoder discretes 2 channel sound to discrete 6.1 channel sound.
MUSIC : NEO:6 MUSIC mode is optimized for music playback
•
CINEMA : NEO:6 CINEMA mode is optimized for movie playback.
•
42
CINEMA will be selected in turn.
Press SETUP/MENU button, and then press ENTER
button.
• "SETUP MODE" appears on the display and goes into Setup Mode.
Press button to select the "NEO:6 MODE", and then
press ENTER button.
"CEN : IMG : 2" appears on the display.
Press ...† button to set the sound image you want.
You can set the sound image from 0 to 5.
•
• NEO:6 mode can be used with DTS and Dolby Digital multi channel signals.
Pro Logic works only for PCM audio signals with sampling frequency of
•
32KHz, 44KHz or 48KHz.
•
MAIN UNIT
1
Press SURROUND button briefly to select "NEO:6" mode.
• Each time you press this button, DPLIIx NEO:6
selected in turn.
2
Press SELECT( , ) button.
• Each time you press this button, MUSIC CINEMA will be selected in turn.
To set sound image of centre speaker
If TV (or screen) is installed high on a wall, you can raise the sound image
of the centre speaker to compensate.
1
Press SETUP button.
• "SETUP MODE" appears on the display and goes into Setup Mode.
2
Press FUNCTION button to select the "NEO:6 mode".
3
Press SURROUND button.
"CEN : IMG : 2" appears on the display.
•
4
Press SELECT( ) button to set the sound image you want.
,
• You can set the sound image from 0 to 5.
To exit setup mode
• Wait for about 5 seconds or press SETUP button.
"SETUP OFF" appears on the display and Setup Mode is exited.
You can use this function to set the sound image of centre speaker
•
only via the main unit.
GB
SFE STEREO will be
43