Setting The Speaker Mode - Samsung HT-AS610 Instruction Manual

Digital surround av receiver system
Hide thumbs Also See for HT-AS610:
Table of Contents

Advertisement

Setting the Speaker Mode

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Frequency response from the speaker will be adjusted according to your speaker configuration and whether certain
speakers are used or not.
REMOTE CONTROL
1
2
3
To Exit Setup Mode
Wait for about 5 seconds or press the SPK SELECT button of the remote control to
select SPK MODE OFF.
To turn the SUBWOOFER On or Off.
Press SUBWOOFER button on the remote.
Each time you press this button, SW SPK : YES, SW SPK : NO will be selected in turn.
If F.SPK is set to LARGE, you can select YES or NO for SW SPK.
If F. SPK is set to SMALL,SW SPK is automatically set to YES. NO cannot be
selected.
22
All manuals and user guides at all-guides.com
Press SPK SELECT button to select the speaker you want.
Each time you press this button, F.SPK
C.SPK
S.SPK
CROVR
SPK MODE OFF will be selected in turn.
Press ...† button to set the mode (Large, Small etc.) for the
selected speaker.
Repeat steps 1-2 to set the mode for each speaker.
SW SPK
Setting the Speaker
SPEAKER
F.SPK(Front)
C.SPK(Center)
S.SPK(Surround)
SW SPK(Subwoofer)
CROVR
(Crossover Frequency)
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and enters into Setup Mode.
2
Press FUNCTION button 1 time.
"SPK SETUP" appears in the display.
3
Press SURROUND button to select the speaker you
want.
Each time you press this button, F.SPK
CROVR will be selected in turn.
4
Press SELECT (
selected speaker.
5
Repeat steps 3-4 to adjust each speaker.
To Exit Setup Mode
Wait for about 5 seconds or press SETUP button.
"SETUP MODE OFF" appears on the display and exits Setup Mode.
• LARGE : Select when using large speakers. You can listen to full
Possible Settings
Default Setting
LARGE,SMALL
SMALL
• SMALL : Select this when using small speakers.
LARGE,SMALL,NONE
SMALL
• NONE : Select this when you use no speaker.
LARGE,SMALL,NONE
SMALL
• YES(Subwoofer) : Select this when using the Subwoofer
YES,NO
YES
60,80,100,120,
• NO(Subwoofer) : Select when not using the Subwoofer
150Hz
150,180,200(Hz)
• CROVR: Select the crossover frequency for the best bass
C.SPK
S.SPK
SW SPK
,
) button to set the mode for the
range sound.
Bass below 100Hz will not be output.
Speaker.
Speaker.
response in your room.
23

Advertisement

Table of Contents
loading

Table of Contents