1. Manuals
  2. Brands
  3. Wilko Manuals
  4. Grill
  5. HG1449WK
  6. Assembly instruction manual

Wilko HG1449WK Assembly Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

4 BURNER GAS BBQ
Assembly instruction (0408877)
0359-17
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HG1449WK and is the answer not in the manual?

Questions and answers

Related Manuals for Wilko HG1449WK

Summary of Contents for Wilko HG1449WK

  • Page 1 4 BURNER GAS BBQ Assembly instruction (0408877) 0359-17...

  • Page 2: Expanded View

    Expanded View...

  • Page 3: Parts Supplied

    Parts Supplied Please check parts against the list below before assembling your Barbecue Grill. Take a few moments to familiarise yourself with the contents. Check that all holes are clear of paint before assembly, if you find a blockage, please use a screw driver to clear the blocked hole. Lid handle Tool Hook Temperature gauge...

  • Page 4: Fittings Supplied

    Fittings Supplied Screw ST4.8x10 Wing nut M6 Washer 6 Screw M4x10 Bolt M6x16 Lock washer 6 Screwdriver Wing M6x10 bolt Nut M10 Wrench M6 & M10 Screwdriver (included), wrench (included) and plastic head hammer (not included) are required to assemble the Barbecue. •...
  • Page 5 Assembly Please read all instructions thoroughly before proceeding. Find a large, clean area in which to assemble your barbecue. Please refer to parts list and assembly diagram as necessary. Assembly of the barbecue involves many large components, it is advisable to have two people assemble the unit. STEP 1: A: Attach end cap of left cart frame (23) to left cart frame (17) ((A) Screw 2Pcs).
  • Page 6 STEP 2: A: Attach axle (22), wheel (21) to right cart frame (18) ((E) Nut 2Pcs). Note: Make sure the right cart frame must be faced to the correct orientation as shown in below diagrams. (18) (21) (22) (21) STEP 3: A: Attach upper front panel (24) and lower front panel (25) to the assembled cart frame ((C) Bolt 8Pcs).
  • Page 7 STEP 4: A: Attach rear cart frame support (20) to the assembled cart frame ((C) Bolt 4Pcs). (20) STEP 5: A: Attach lighting hook (19) to the assembled right cart frame ((D) Wing bolt 1Pc). B: Hang the lighting hook onto wing bolt. (19) (19)
  • Page 8 STEP 6: A: Attach lid handle (1) onto lid & fire-bowl assembly ((G) Washer 2Pcs / (H) Lock washer 2Pcs / (F) Wing nut 2Pcs). B: Attach temperature gauge (2) onto lid & fire-bowl assembly (5). STEP 7: A: Attach lid & fire-bowl assembly onto the assembled cart frame ((C) Bolt 4Pcs / (H) Lock washer 4Pcs / (G) Washer 4Pcs)..
  • Page 9 STEP 8: A: Attach tool holder (12) and tool hook (13) to left side shelf (11) ((C) Bolt 2Pcs). Note: Bottle opener is pre-assembled on the left side shelf (11). (13) (13) (13) (13) (12) (11) STEP 9: A: Fix 2 bolts (C) into the upper bolt hole of left cart frame and leave 5mm space for hanging the left side shelf (11) ((C) Bolt 2Pcs).
  • Page 10 STEP 10: A: Fix 2 bolts (C) into the upper bolt hole of right cart frame and leave 5mm space for hanging the right side shelf for side burner (16) ((C) Bolt 2Pcs). B: Hang the right side shelf for side burner (16) onto 2 upper bolt heads. C: Fix another 3 bolts (C) into the remaining bolt hole of right cart frame.
  • Page 11 STEP 12: A: Insert the end tube of side burner (8) into the slot of side burner pan (See diagram a & b). B: Insert the end tube of side burner into the side burner valve (See diagram c). Note: Make sure the end tube of side burner must be covered the side valve stem properly. C: Secure side burner at the bottom of side shelf by using screw B ((B) Screw 2Pcs) (See diagram d).
  • Page 12 STEP 14: A: Place heat plate (6) into fire-bowl assembly. B: Place cooking grid (4) into fire-bowl assembly. STEP 15: A: Place warming rack (3) onto hole of fire-bowl assembly.
  • Page 13 STEP 16: A: Attach grease cup (14) onto fire-bowl assembly. B: Place grease tray (15) onto grease tray support. (15) (14)

  • Page 14: General Safety Warnings

    General Safety Warnings Important: Read all the safety warnings and assembly instructions before use and retain all information for future reference. • Read assembly instruction enclosed & all the safety warning before using the appliance. Failure to follow instructions could result in death, serious body injury or property loss. •...

  • Page 15: Installing Gas Cylinder

    Installing Gas Cylinder To operate you will need (1) precision-filled gas cylinder between 11kg and 15kg. Your barbecue will perform better if propane gas cylinder is used. CAUTION: Gas cylinder must be properly disconnected and removed prior to moving this grill. Specification of Gas Cylinder*（*Gas cylinder not included）.
  • Page 16 Connect Gas Cylinder 1. Make sure control knobs are “OFF” position. 2. The regulator rubber hose and regulator are properly and securely connected. 3. The regulator handle is in the “OFF” position. (Figure C). 4. Remove the seal cap from the automatic valve on the gas cylinder. 5.

  • Page 17: Checking For Leaks

    Checking for Leaks Burner Connections 1. Make sure the regulator valve and hose connections are securely fastened to the burner and the gas cylinder. Visually check the connection between the burner venture pipe and orifice. Make sure the burner venture pipes fit over the orifice.
  • Page 18 4. Connect gas cylinder per “Installing Gas Cylinder” section. 5. To turn regulator ON, turn the regulator valve counterclockwise to the “ON” position. (Figure D) Caution: If you are unable to turn the regulator handle to the “ON” position, your regulator is not properly connected. Do not force the handle to open.

  • Page 19: Operating Side Burner

    6. Turn grill “OFF” per “Turning off” instruction. For more tips on direct cooking please see “Tips for Better Cookouts and Longer Grill Life”. Indirect Cooking CAUTION: Do not leave grill unattended while preheating, cooking or burning off food residue on “HIGH”. If grill has not been cleaned, a grease fire can occur.

  • Page 20: Cleaning And Care

    Turning off 1. Turn gas cylinder valve to “CLOSED”. 2. Turn all control knobs clockwise to the “OFF” position. Note: A “poof” sound is normal as the last of the Propane gas is burned 3. Disconnect gas cylinder per “Disconnect Gas Cylinder” instructions. CO Warning: 1.

  • Page 21: Technical Specification

    6. Place protective cap cover on gas cylinder and store tank outdoors in a well ventilated area out of the direct sunlight. 7. If storing the grill outdoors, cover the grill with a grill cover for protection from the weather. Technical Specification Model Number: HG1449WK Gas Category: I 3+(28-30/37)

  • Page 22: Troubleshooting

    Troubleshooting Produced in China for Wilko, Roebuck Way, Manton Wood, Worksop, Nottinghamshire, S80 3EG Careline 08000 329 329 www.wilko.com...

Table of Contents