Table of Contents
Advertisement
PROGRAMMING THE CYCLOCOMPUTER
PROGRAMMING THE CYCLOCOMPUTER
SETTING ODOMETER
SpeedZone Cycle Computers allow you to manually adjust the Odometer. From the SET ODO screen
PRESS the PREV key to enter the setting sequence.
adjust value
PRESS
NEXT
SET MPH/KPH
SET VALUE
PRESS PREV
PRESS PREV
NOTE:
PRESS & HOLD the NEXT key while adjusting a value to fast advance in a continuous loop.
NOTE:
PRESS & HOLD the PREV key in any primary or secondary set screen to escape to main mode screens.
14
continue
adjust value
SETTING SEQUENCE
through all fields.
Return to MAIN
PRESS
SET PROGRAM:
NEXT
PRESS PREV
SET VALUE
PRESS PREV
RESET THE CYCLOCOMPUTER
To reset the computer, from any operating mode screen PRESS & HOLD the PREV and NEXT keys simultaneously to reset
the cyclocomputer.
PRESS & HOLD
.5 SEC
MAIN MODE
RESET
SCREEN
SEQUENCE
PRESS & HOLD
2 SEC
SCREEN AFTER
REST
15
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SpeedZone Sport and is the answer not in the manual?
Questions and answers
How do I turn off my speed zone sport?
The Specialized SpeedZone Sport has an auto-wake/auto-timer function, meaning it does not require manual turning off. It will automatically enter a low-power state when not in use.
This answer is automatically generated
The image below shows a Specialized Speedzone Sport that is not shown in any your manuals and I do not see how to change from km to mi
To change the display from kilometers to miles on a Specialized SpeedZone Sport:
1. Press the "MODE" button until (OD) appears on the bottom of the screen.
2. Hold down the "FUNCTION" button and tap the "MODE" button once.
3. The Km/h indicator will flash.
4. If you want miles instead of kilometers, press the "MODE" button to toggle the setting.
5. Once the correct unit is displayed, press the "FUNCTION" button to confirm.
This answer is automatically generated