Maintenance Of The Pump Juwel Eccoflow In The Filter System Bioflow Super M, L, Xl - juwel TRIGON 190 Instruction Manual

OPTIONAL:
BioBoost
JUWEL bioBoost immediately activates new filter media and accelerates the filtration
performance in your aquarium. It promotes the vitality of fish and plants. After 4
weeks, the bag with the nutrient residues can be removed or replaced, if required.
Amorax
Amorax is a highly efficient filter medium made of natural zeolite. It quickly and
effectively binds ammonium, thereby preventing the formation of ammonia and
promotes the vitality of your fish. Replace the JUWEL Amorax every 3 months.
Carbax
Carbax's excellent absorption
discolourations, odours and toxic substances and ensure crystal-clear water. We
recommend replacing JUWEL Carbax every 2 months.
Cirax
Cirax is a biological filter medium which creates the perfect colonisation conditions
for useful bacteria, due to its large, highly porous surface. We recommend changing
JUWEL Cirax every 12 months.
Phorax
JUWEL Phorax is a highly effective filter medium used to break down phosphates in
your aquarium. This effectively reduces the growth of algae and can contribute to
improved plant growth. Change JUWEL Phorax every 2 weeks.
Important:
Always use original JUWEL Aquarium filter media to ensure the optimum
performance of your system.
Maintenance of the pump JUWEL Eccoflow in the filter system
Bioflow Super M, L, XL
The JUWEL Eccoflow pump should be checked with regard to functionality and cleaned at regular intervals (at least once a
month).
Please proceed as follows to this end:
1. Disconnect all electrical devices that are operated in the water from the power grid.
2. Remove the outlets.
3. Remove the pump from the pump retainer of the filter.
4. Disconnect the adapter (A) from the motor by turning it counter-clockwise and remove the impeller from the chamber.
5. Now clean all components thoroughly. Deposits and dirt should in particular be removed from the pump chamber, the
impeller and pump shaft. Otherwise the functionality of the pump will be impaired.
6. Check the impeller for damage and possible signs of wear of the magnet. You should also ensure that the two rubber
bearings are located on the ends of the pump shaft.
After that, please reinstall the pump in reverse order in the filter.
properties permanently and quickly bind
9