Using For The First Time; Selecting Language; Filling The Water Circuit With Water - V-ZUG SUPREMO XSL Operating Instructions Manual

2

Using for the first time

Coffee has been used to factory test the appliance, and so it is possible that there
may be traces of coffee in the mill. The appliance is, however, guaranteed to be
completely new.
Before operating the appliance for the first time, the following steps should be taken:
2.1

Selecting language

▸ If you have not already done so, connect the appli-
ance to the mains electricity supply: Insert the mains
plug into a suitable mains socket.
▸ Slide the appliance out.
▸ Set the main switch to I.
▸ Touch .
– The user settings menu appears in the display.
▸ Touch or repeatedly until the user setting
pears in the display.
▸ Set the language.
▸ Slide the appliance in.
2.2

Filling the water circuit with water

Danger of burns!
Do not leave the appliance unattended while hot water is being delivered!
▸ When the corresponding message appears in the dis-
play: Fill the water tank and then place it back in the
appliance (see page 14).
▸ When the corresponding message appears in the dis-
play: Slide the hot-water/steam spout 1 on the con-
nection nozzle 2 and place a 0.5-litre receptacle un-
der the water spout.
– In the display appears: «Water circuit empty. Press
to fill»
▸ Touch .
– Hot water comes out of the hot-water/steam spout
1.
When hot water stops coming out of the hot-water/
steam spout 1:
– the main menu appears in the display.
– the appliance is ready for use.
10
ap-
2
1