Table of Contents
Advertisement
Performing an Exam
NOTE
If you press a trackball button, unfreeze the image, or change the imaging mode or settings that
affect the trackball assignment, annotation mode goes into standby. To return to annotation,
press ABC Label.
2. Touch ABC Labels.
3. Use the trackball to position the text cursor on the display, or touch Home to return it to
the home location.
NOTE
You cannot move a label once you have added it to the display.
4. Do any of the following:
•
•
•
•
•
•
•
•
•
•
NOTE
Erase Last erases all arrows from the image display before it erases text labels.
160
To add text, type the text that you want to appear on the display.
To display predefined labels, touch a label control to display its text.
To display an arrow, press the Arrow soft key, position the arrow with the trackball,
and then click to fix the position.
To erase an arrow, touch Erase Last.
To erase the last word typed, touch Erase Last to erase all arrows and then erase
words one at a time.
To erase all text, touch Erase All.
To move the text cursor to the home position, touch Home.
To set a new home position, position the cursor and touch Set Home.
To exit annotation mode, press ABC Label again.
To use text replace, see Changing Labels Using Text Replace in the online help.
Annotation
EPIQ 7 User Manual 4535 617 25341
Advertisement
Table of Contents
