Aruba 200 Series Installation Manual

The Aruba AP-204 and AP-205 wireless access points support the IEEE 802.11ac and 802.11n standards for high-performance
WLAN. These access points use MIMO (Multiple-in, Multiple-out) technology and other high-throughput mode techniques to
deliver high-performance, 802.11n 2.4 GHz and 802.11ac 5 GHz functionality while simultaneously supporting legacy 802.11a/b/g
wireless services. The AP-200 Series access points work only in conjunction with an Aruba Controller. The Aruba AP-200 Series
access point provides the following capabilities:
Wireless transceiver

Protocol-independent networking functionality

IEEE 802.11a/b/g/n/ac operation as a wireless access point

IEEE 802.11a/b/g/n/ac operation as a wireless air monitor

Compatibility with IEEE 802.3af PoE

Central management configuration and upgrades through a controller


Package Contents

AP-204 or AP-205 Access Point

9/16" and 15/16" Ceiling Rail Adapters

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including
the original packing materials. Use these materials to repack and return the unit to the supplier if needed.

Hardware Overview

The following sections outline the hardware components of the 200 Series access point.
Aruba AP-200 SeriesLEDs
Figure 1
LEDs
The AP-200 Series is equipped with four LEDs that indicate the status of the various components of the AP.
PWR: Indicates whether or not the AP-200 Series is powered-on and shows basic system status

ENET: Indicates the status of the AP-200 Series' Ethernet port

5 GHz: Indicates the status of the 802.11a/n/ac radio

2.4 GHz: Indicates the status of the 802.11b/g/n radio

Aruba 200 Series Access Points

Installation Guide

XXX-IG-0X | Month Year1