1. Manuals
  2. Brands
  3. Cincoze Manuals
  4. Industrial PC
  5. DA-1100 Series
  6. User manual

Cincoze DA-1100 Series User Manual

Fanless computing solution. intel pentium n4200/ celeron n3350 processor affordable fanless embedded computer
Hide thumbs Also See for DA-1100 Series:
Table of Contents

Advertisement

Quick Links

Fanless Computing Solution
Intel® Pentium® N4200/ Celeron® N3350 Processor
Affordable Fanless Embedded Computer
DA-1100 Series

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DA-1100 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Cincoze DA-1100 Series

Summary of Contents for Cincoze DA-1100 Series

  • Page 1 Fanless Computing Solution Intel® Pentium® N4200/ Celeron® N3350 Processor Affordable Fanless Embedded Computer DA-1100 Series...

  • Page 2: Table Of Contents

    | User’s Manual DA-1100 Series Rugged Embedded Computer Contents Prefaces Revision …………………………………………………..……………….………… 04 Copyright Notice ……………………………………………………………………. 04 Acknowledgement …..………………………………………………..... 04 Disclaimer …………………………………………………………………………… 04 Declaration of Conformity …………………………………………………………. 04 Product Warranty Statement ……………………………………………………… 05 Technical Support and Assistance ……………………………………………….. 06 Conventions Used in this Manual ………………………………………………… 06 Safety Precaution ……...……………………………………………………………...
  • Page 3 | User’s Manual DA-1100 Series Rugged Embedded Computer Chapter 4 BIOS Setup 4.1 BIOS Introduction …….……….……….…….…….…..….…………... 45 4.2 Main Setup ……..……….…………….…….…..….………………..46 4.3 Advanced Setup ……………………….……….……………………….. 47 4.3.1 ACPI Settings ……..…………….……….………………………. 47 4.3.2 F81866 Super IO Configuration ..…….………………………... 48 4.3.3 Hardware Monitor ………………..……………………………..50 4.3.4 S5 RTC Wake Setting …….……..……………..……………..

  • Page 4: Revision

    2019/01/08 Copyright Notice © 2017 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied, modified, or reproduced in any form or by any means for commercial use without the prior written permission of Cincoze Co., Ltd.

  • Page 5: Product Warranty Statement

    (such as a fuse, battery, etc.), re not warranted. Before sending your product in, you will need to fill in Cincoze RMA Request Form and obtain a RMA number from us. Our staff is available at any time to provide you with the most friendly and immediate service.

  • Page 6: Technical Support And Assistance

    | User’s Manual DA-1100 Series Rugged Embedded Computer Technical Support and Assistance 1. Visit the Cincoze website at www.cincoze.com where you can find the latest information about the product. 2. Contact your distributor or our technical support team or sales representative for technical support if you need additional assistance.

  • Page 7: Safety Precaution

    | User’s Manual DA-1100 Series Rugged Embedded Computer Safety Precautions Before installing and using this device, please note the following precautions: 1. Read these safety instructions carefully. 2. Keep this User’s Manual for future reference. 3. Disconnected this equipment from any AC outlet before cleaning.

  • Page 8: Package Content

    | User’s Manual DA-1100 Series Rugged Embedded Computer Package Contents Before installation, please ensure all the items listed in the following table are included in the package. Q’ty Item Description DA-1100 Affordable Fanless Embedded Computer Utility DVD Driver Thermal Pad (for CPU Thermal Block)

  • Page 9: Optional Modules & Accessories

    | User’s Manual DA-1100 Series Rugged Embedded Computer Optional Modules & Accessories Model No. Description CMI Module with 1x Display Port / 1x Universal Bracket with DP Cutout for CMI-DP101/UB0406 DA Series CMI Module with 1x DVI-D Connector / 1x Universal Bracket with DVI-D...

  • Page 10: Chapter 1 Product Introductions

    Chapter 1 Product Introductions...

  • Page 11: Overview

    | User’s Manual DA-1100 Series Rugged Embedded Computer 1.1 Overview Cincoze’ DA-1100 affordable fanless embedded computer is based on the Intel® Pentium® N4200 / Celeron® N3350 processor. This mainstream Intel® SoC (Apollo Lake) integrates the Intel® Gen 9 graphics architecture with triple display support in 4K/2K UHD resolution.

  • Page 12: Product Pictures

    | User’s Manual DA-1100 Series Rugged Embedded Computer 1.3 Product Pictures 1.4 Key Features • Onboard Intel ® ® ® Pentium N4200 / Celeron N3350 Processors • Supports Triple Independent Display • Supports PoE+ Function (with optional CFM Module) • Supports CMI Interface for I/O Expandability •...

  • Page 13: Hardware Specification

    | User’s Manual DA-1100 Series Rugged Embedded Computer 1.5 Hardware Specification Processor Power Requirement • Onboard Intel • Supports AT/ATX Power Type ® ® Pentium N4200 Quad Core Processor, • Power Input Voltage 9~48VDC up to 2.50 GHz • Onboard Intel •...

  • Page 14: System I/O

    | User’s Manual DA-1100 Series Rugged Embedded Computer 1.6 System I/O Front Panel USB 3.0 Port ATX Power On/Off Switch Used to connect USB 3.0/2.0/1.1 device Press to power-on or power-off the system USB 2.0 Port Power LED Used to connect USB 2.0/1.1 device...
  • Page 15 WiFi module Universal I/O Bracket This expansion area is reserved for Mini-PCIe expansion or Cincoze own pin-defined interface (CMI). CMI interfaces supports various type of I/O modules such as COM / DIO / DisplayPort / DVI / LPT & PS2 / VGA / HDMI.

  • Page 16: Mechanical Dimension

    | User’s Manual DA-1100 Series Rugged Embedded Computer 1.7 Mechanical Dimensions Each of DA-1100 series computers has the same mechanical dimension. Unit: mm...

  • Page 17: Chapter 2 Switches And Connectors

    Chapter 2 Switches and Connectors...

  • Page 18: Jumper Settings

    | User’s Manual DA-1100 Series Rugged Embedded Computer 2.1 Jumpers Settings DA-1100 is featured with jumper-free design 2.2 Location of the Switches and Connectors 2.2.1 Top View...

  • Page 19: Bottom View

    | User’s Manual DA-1100 Series Rugged Embedded Computer 2.2.2 Bottom View...

  • Page 20: Switch And Connector Definition

    | User’s Manual DA-1100 Series Rugged Embedded Computer 2.3 Switch and Connector Definition List of Switch & Connector Connector Location Definition PWR_SW2 Power Button AT_ATX AT / ATX Power Mode Switch CLR_CMOS Clear CMOS Mode Switch MINIPCIE1 Mini PCI-Express Socket + 4G Module...

  • Page 21: Definition Of Switches

    | User’s Manual DA-1100 Series Rugged Embedded Computer 2.4 Definition of Switches PWR_SW1 : System Power Button Switch Definition Push Power System AT_ATX : AT / ATX Power Mode Switch Switch Definition 1-2 (Left) AT Power Mode 2-3 (Right) ATX Power Mode (Default)

  • Page 22: Definition Of Connectors

    2.5 Definition of Connectors MINIPCIE1： Mini PCI-Express Socket (Support 4G Module) Definition Definition WAKE# 3.3V +1.5V SMB_CLK PETN0/USB3TN0 1.5V SMB_DATA PETP0/USB3TP0 SIM_VCC SIM_DATA USB_D- REFCLK- RESERVED SIM_CLK USB_D+ RESERVED REFCLK+ SIM_Reset 3.3V SIM_VPP 3.3V PERST# PERN0/USB3RN0 3.3V PERP0/USB3RP0 +3.3V...
  • Page 23 MINIPCIE2 : Mini PCI-Express Socket (Support mSATA) Definition Definition WAKE# 3.3V +1.5V SMB_CLK PETN0/SATATN0 1.5V SMB_DATA PETP0/SATATP0 USB_D- REFCLK- USB_D+ 3.3V REFCLK+ 3.3V 3.3V PERST# +1.5V PERN0/SATARP0 +3.3V PERP0/SATARN0 +3.3V...
  • Page 24 | User’s Manual DA-1100 Series Rugged Embedded Computer PWR_SW1 : Remote Power On/Off Connector Definition PWR_SW (Note: Please do not apply power to the pins. This port is used to connect a switch.) DC_IN1 : DC Power Input Connector (+9~48V) Connector Type: Terminal Block 1X3 3-pin, 5.0mm pitch...
  • Page 25 | User’s Manual DA-1100 Series Rugged Embedded Computer COM1_1 / COM2_1 : RS232 / RS422 / RS485 Connector Connector Type: 9-pin D-Sub RS422 / 485 Full RS485 Half RS232 Definition Duplex Definition Duplex Definition DATA1- DATA1+ POWER1 : Power Connector Connector Type: 1x4 4-pin Wafer, 2.0mm pitch...

  • Page 26: Chapter 3 System Setup

    Chapter 3 System Setup...

  • Page 27: Removing The Chassis Bottom Cover

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.1 Removing the Chassis Bottom Cover In order to prevent electric shock or system damage, before removing the chassis cover, must turn off power and disconnect the unit from power source. 1. Turn over the unit to have the bottom side face up, loosen the 4 screws of bottom cover and place them aside.

  • Page 28: Removing The Chassis

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.2 Removing the Chassis 1. Hold front and rear panel and lift up the body of unit vertically. 2. Turn over the body of the unit and place it gently.

  • Page 29: Installing The Antennas

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.3 Installing the Antennas 1. Remove the antenna hole covers at back panel. 2. Have antenna jack penetrate through the hole. 3. Put on washer and fasten the nut with antenna jack.
  • Page 30 | User’s Manual DA-1100 Series Rugged Embedded Computer 4. Assemble the antenna and antenna jack together. 5. Attach the RF connector at another end of cable onto the module.

  • Page 31: Installing A Full-Size Mini Pcie Card On Bottom Side

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.4 Installing a Full-Size Mini PCIe Card on Bottom Side, including Half-Size Mini PCIe card 1. Turn over the body of unit. Unscrew the 4 screws on HDD bracket and remove the bracket.
  • Page 32 | User’s Manual DA-1100 Series Rugged Embedded Computer 3. Tilt the Mini PCIe modules at 45 degree angle and insert it to the slot until the gold- pated connector of module contacted firmly with the slot. 45° 45° 4. Press down the module and use the two screws to fix the module.

  • Page 33: Installing A Sata Hard Drive

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.5 Installing a SATA Hard Drive 1. Lift up the empty HDD bracket by unscrewing the 4 screws. 2. Make the PCB side of the HDD face up, place the HDD bracket on it. Ensure the direction of bracket is correct and use 3 provided screws to assemble HDD and HDD bracket together.

  • Page 34: Installing A Sodimm

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.6 Installing a SODIMM 1. Locate SODIMM socket. 2. Tilt the SODIMM module at a 45 degree angle and insert it to SODIMM socket until the gold-pated connector of module contacted firmly with the socket.

  • Page 35: Installing The Chassis

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.7 Installing the Chassis 1. Hold the body of unit, and make sure the both sides of front and rear panels are in the chassis grooves and insert the body of unit into chassis.

  • Page 36: Installing The Chassis Bottom Cover

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.8 Installing the Chassis Bottom Cover 1. Level the grooves on the cover at front and rear panels. Put on the cover. 2. Fasten the 4 screws to fix the cover.

  • Page 37: Installing A Sim Card

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.9 Installing a SIM Card 1. Loosen 2 screws on front panel to remove cover plate. 2. SIM card slot is at the front panel of the system. 3. Insert the SIM card.

  • Page 38: Wall Mount Brackets

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.10 Wall Mount Brackets DA-1100 offers Wall Mount that customers can install system on the wall in convenient and economical way. 1. The mounting holes are at the bottom side of system. Use provided 4 screws to fasten the bracket with each side on system together.

  • Page 39: Side Mount Bracket

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.11 Side Mount Bracket DA-1100 offers Side Mount that customer can install system to the right or left side of wall to create effectiveness of space. 1. The mounting holes are at the bottom side of system. Remove the 2 screws at the right side on the bottom plate.
  • Page 40 | User’s Manual DA-1100 Series Rugged Embedded Computer 3. Place the side mount bracket on the bottom of system as shown in the picture below, and fasten the rest of 4 screws to fix the side mount bracket with system together.

  • Page 41: Vesa Mount Bracket

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.12 VESA Mount Bracket DA-1100 offers VESA Mount that customer can mount system with panel complying with VESA 75mm standard for various usage. 1. Provided below is the base of the system unit and screw holes specified to be mounted from VESA stand.
  • Page 42 | User’s Manual DA-1100 Series Rugged Embedded Computer 3. Provided below is completion of mounting with VESA stand.

  • Page 43: Din-Rail Mount Bracket

    | User’s Manual DA-1100 Series Rugged Embedded Computer 3.13 DIN-Rail Mount Bracket DA-1100 offers DIN-Rail Mount that customer can install system on the DIN Rail. 1. The mounting holes are at the bottom of system. Fasten the 2 screws to fix the DIN-...

  • Page 44: Chapter 4 Bios Setup

    Chapter 4 BIOS Setup...

  • Page 45: Bios Introduction

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.1 BIOS Introduction The BIOS (Basic Input/Output System) is a program located on a Flash Memory on the motherboard. When you start the computer, the BIOS program will gain control. The BIOS first...

  • Page 46: Main Setup

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.2 Main Setup Press <Del> key to enter BIOS CMOS Setup Utility, the Main Menu (as shown below) will appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu.

  • Page 47: Advanced Setup

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.3 Advanced Setup This section allows you to configure and improve your system and allows you to set up some system features according to your preference. 4.3.1 ACPI Settings...

  • Page 48: F81866 Super Io Configuration

    | User’s Manual DA-1100 Series Rugged Embedded Computer ■ Enable ACPI Auto Configuration [Disabled] Enables or disables BIOS Advanced Configuration Power Interface® (ACPI) auto configuration. ■ Enable Hibernation [Enabled] Enables or disables system ability to hibernate state (OS/S4 state). This option may not be effective with some OS.
  • Page 49 | User’s Manual DA-1100 Series Rugged Embedded Computer ■ Serial Port 1~4 Configuration ❑ Serial Port [Enabled] Enables or disables serial port. ❑ Change Settings [Auto] Allows you to change the IO Address & IRQ settings of the specified serial port.

  • Page 50: Hardware Monitor

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.3.3 Hardware Monitor This screen displays the current status of all monitored hardware devices/components such as voltages, temperatures. 4.3.4 S5 RTC Wake Settings...

  • Page 51: Serial Port Console Redirection

    | User’s Manual DA-1100 Series Rugged Embedded Computer ■ Wake system from S5 [Disabled] Enables or disables wake system from S5 (soft-off state). [Disabled]: Disables wake system from S5. [Fixed Time]: Sets a fixed time (HH:MM:SS) to wake system from S5.

  • Page 52: Cpu Configuration

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.3.6 CPU Configuration ■ Socket 0 CPU Information This section provides information on your CPU, frequency, and cache memory. ■ Active Processor Cores [Enabled] Number of cores to enable in each processor package.

  • Page 53: Network Stack Configuration

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.3.7 Network Stack Configuration ■ Network Stack [Disabled] Enables or disables UEFI Network Stack. 4.3.8 CSM Configuration This option controls legacy/UEFI ROMs priority.
  • Page 54 | User’s Manual DA-1100 Series Rugged Embedded Computer ■ CSM Support [Disabled] Enables or disables compatibility support module. ■ Boot option filter [UEFI and Legacy] Allows you to select which type of operating system to boot. [UEFI and Legacy]: Allows booting from operating systems that support legacy option ROM or UEFI option ROM.

  • Page 55: Usb Configuration

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.3.9 USB Configuration ■ Legacy USB Support [Enabled] This item allows you to enable or disable legacy USB support. When set to [Auto], legacy USB support will be disabled automatically if no USB devices are connected.

  • Page 56: Chipset Setup

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.4 Chipset Setup This section allows you to configure chipset related settings according to user’s preference. 4.4.1 North Bridge This section provides information on the installed memory size.

  • Page 57: South Bridge

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.4.2 South Bridge ■ OS Selection [Windows] Allows you to configure Operating System version to install. Configuration options: [Windows] [Intel Linux] ■ Mini PCIE2/mSATA Switch [Mini PCIE] Allows you to change Mini PCIE2 as [Mini PCIE] or [mSATA].

  • Page 58: South Cluster Configuration

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.4.3 South Cluster Configuration ■ PCI Express Configuration...
  • Page 59 | User’s Manual DA-1100 Series Rugged Embedded Computer PCI Express Root Port 5 (MiniPcie2) ❑ PCI Express Root Port 5 (MiniPcie2) [Enabled] Enables or disables PCI Express Root Port. ❑ PCIeSpeed [Auto] Allows you to select PCI Express port speed.
  • Page 60 | User’s Manual DA-1100 Series Rugged Embedded Computer ■ Miscellaneous Configuration ❑ Restore AC Power Loss [Last state] Allows you to specify which power state system will enter when power is resumed after a power failure (G3 state). [Always on]: Enters to power on state.

  • Page 61: Security Setup

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.5 Security Setup This section allows you to configure BIOS security settings. ■ Administrator Password Allows you to set Administrator Password to control access to the BIOS Setup utility. ■ User Password Allows you to set User Password to control access to the system at boot and to the BIOS Setup utility.

  • Page 62: Boot Setup

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.6 Boot Setup This section allows you to configure Boot settings. ■ Bootup NumLock State Allows you to set NumLock key to [On] or [Off] state when system boots up. ■ Quiet Boot Allows you to enable or disable Quiet Boot function.

  • Page 63: Save & Exit

    | User’s Manual DA-1100 Series Rugged Embedded Computer 4.7 Save & Exit ■ Save Changes and Reset This item allows you to reset the system after saving changes. ■ Discard Changes and Reset This item allows you to reset system setup without saving any changes.

  • Page 64: Chapter 5 Product Application (For Cmi-Dio100 Only)

    Chapter 5 Product Application (For CMI-DIO100 Only)

  • Page 65: Digital I/O (Dio) Application

    This section describes DIO application of the product. The content and application development are better understood and implemented by well experienced professionals or developers. 5.1.1 Digital I/O Programming Guide 5.1.1.1 Pins for Digital I/O for Cincoze DA series product Item Standard GPIO54 (Pin13)
  • Page 66 | User’s Manual DA-1100 Series Rugged Embedded Computer 5.1.1.3 Relative Registers To program the F81866A configuration registers, the following configuration procedures.
  • Page 67 | User’s Manual DA-1100 Series Rugged Embedded Computer 5.1.1.4 Sample Code in C Language 5.1.1.4 .1 Control of GP54 to GP57 #define AddrPort 0x4E #define DataPort 0x4F <Enter the Extended Function Mode> WriteByte(AddrPort, 0x87) WriteByte(AddrPort, 0x87) // Must write twice to enter Extended mode <Select Logic Device>...
  • Page 68 | User’s Manual DA-1100 Series Rugged Embedded Computer 5.1.1.4 .2 Control of GP60 to GP63 #define AddrPort 0x4E #define DataPort 0x4F <Enter the Extended Function Mode> WriteByte(AddrPort, 0x87) WriteByte(AddrPort, 0x87) // Must write twice to enter Extended mode <Select Logic Device>...
  • Page 69 | User’s Manual DA-1100 Series Rugged Embedded Computer 5.1.1.5 Change base address <Enter the Extended Function Mode> WriteByte(AddrPort, 0x87) WriteByte(AddrPort, 0x87) // Must write twice to enter Extended mode <Select Logic Device> WriteByte(AddrPort, 0x07) WriteByte(dataPort, 0x06) // Select logic device 06h...

  • Page 70: Digital I/O (Dio) Hardware Specification

    | User’s Manual DA-1100 Series Rugged Embedded Computer 5.1.1.7 DIO I/O Port Address Pin Definition Data Bits 0xA05 0xA03 I/O Port address 5.2 Digital I/O (DIO) Hardware Specification • XCOM+ / 2XCOM+ : Isolated power in V+ • XCOM- / 2XCOM- : Isolated power in V- •...

  • Page 71: Dio Connector Definitions

    | User’s Manual DA-1100 Series Rugged Embedded Computer 5.2.1 DIO Connector Definitions DIO1: Digital Input Connector Connector Type: Terminal Block 1X10 10-pin, 3.5mm pitch Definition XCOM+ XCOM- Pin 1 Pin 1...

  • Page 72: Chapter 6 Optional Module Pin Definitions And Settings

    Chapter 6 Optional Module Pin Definitions and Settings...

  • Page 73: Location Of The Connectors And Switches

    | User’s Manual DA-1100 Series Rugged Embedded Computer 6.1 Location of the Connectors and Switches Model No. Description CMI Module with 2x RS232/422/485 / 1x Universal Bracket with 2x CMI-COM102/UB0403 DB9 Cutout for DA Series CMI Module with 8x Optical Isolated DIO (4 in/4 out) / 1xUniversal...

  • Page 74: Installing A Cmi-Com Module

    | User’s Manual DA-1100 Series Rugged Embedded Computer 6.2 Installing a CMI-COM Module 1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-COM module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it.
  • Page 75 | User’s Manual DA-1100 Series Rugged Embedded Computer COM34_SEL1 : COM3 and COM4 Voltage Select Function COM3 0V (RI) 7-9 (Default) COM4 0V (RI) 8-10 (Default) COM3_1 / COM4_1 : RS232 / RS422 / RS485 Connector Connector Type: 9-pin D-Sub...

  • Page 76: Installing A Cmi-Dio Module

    | User’s Manual DA-1100 Series Rugged Embedded Computer 6.3 Installing a CMI-DIO Module 1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-DIO module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it.

  • Page 77: Installing A Cmi-Dp Module

    | User’s Manual DA-1100 Series Rugged Embedded Computer 6.4 Installing a CMI-DP Module 1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-DP module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it.

  • Page 78: Installing A Cmi-Dvi Module

    | User’s Manual DA-1100 Series Rugged Embedded Computer 6.5 Installing a CMI-DVI Module 1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-DVI module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it.

  • Page 79: Installing A Cmi-Vga Module

    | User’s Manual DA-1100 Series Rugged Embedded Computer 6.6 Installing a CMI-VGA Module 1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-VGA module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it.

  • Page 80: Installing A Cmi-Hdmi Module

    | User’s Manual DA-1100 Series Rugged Embedded Computer 6.7 Installing a CMI-HDMI Module 1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-HDMI module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it.

  • Page 81: Installing A Cmi-Lpps Module

    | User’s Manual DA-1100 Series Rugged Embedded Computer 6.8 Installing a CMI-LPPS Module 1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-LPPS module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it.

  • Page 82: Installing A Cfm-Poe Control Module

    | User’s Manual DA-1100 Series Rugged Embedded Computer 6.9 Installing a CFM-PoE Control Module Model No. Description CFM-PoE02 CFM Module with PoE Control Function, Individual Port 25.5W 1. Locate the PoE connector on system motherboard as indicated. 2. Insert the female connector of CFM-PoE module to the male connector on system...
  • Page 83 | User’s Manual DA-1100 Series Rugged Embedded Computer 3. Turn over the heatsink and paste the thermal pad onto the marked by red squares. 4. Paste the heatsink onto the CFM-PoE module carefully and fasten 2 screws to fix it.
  • Page 84 © 2014 Cincoze Co., Ltd. All rights reserved. The Cincoze logo is a registered trademark of Cincoze Co., Ltd. All other logos appearing in this catalog are the intellectual property of the respective company, product, or organization associated with the logo.

This manual is also suitable for:

Da-1100-n33Da-1100-n42

Table of Contents