Related Manuals for Cincoze DA-1100 Series
Summary of Contents for Cincoze DA-1100 Series
- Page 1 DA-1100 Series User Manual Fanless Computing Solution Intel® Pentium® N4200/ Celeron® N3350 Processor Affordable Fanless Embedded Computer Version: V1.14...
-
Page 2: Table Of Contents
2.4 Definition of Connectors …...….……...……….....………………......24 Chapter 3 System Setup 3.1 Removing the Top Cover ……...……………………………….….…………………..29 3.2 Installing SO-DIMM Memory………………………..…………..…………….……………31 3.3 Installing Mini-PCIe Cards on Bottom Side……..……………………………..32 3.4 Installing a SATA Hard Drive…………………………………………………………………34 3.5 Installing a Half-Slim SSD……………………………………………………………………35 DA-1100 Series | User Manual... - Page 3 4.7 Save & Exit …...……….….………………….…..….…..………………………....64 Chapter 5 Product Application (For CMI-DIO100 Only) 5.1 Digital I/O (DIO) application ………..………………………………………………………66 5.1.1 Digital I/O Programming Guide ……………………………………………………66 5.2 Digital I/O (DIO) Hardware Specification ……………………………………………………71 5.2.1 DIO Connector Definition ………………..……...…………….........71 DA-1100 Series | User Manual...
- Page 4 6.4 Installing a CMI-DIO Module…..….…….……………………………………..……….……..77 6.5 Installing a CMI-DP Module…..….…….………..……………………………..……….…….78 6.6 Installing a CMI-DVI Module.……….……………………………………………..……..…79 6.7 Installing a CMI-VGA Module.……….…………………………………………………..…..80 6.8 Installing a CMI-HD Module……………………..……….………………………………..81 6.9 Installing a CMI-LPPS Module……………………..……….……………………………..82 6.10 Installing a CFM-PoE Module…….…..……………………………….……..……….……..83 DA-1100 Series | User Manual...
-
Page 5: Revision
2020/09/10 Copyright Notice © 2019 by Cincoze Co., Ltd. All rights are reserved. No parts of this manual may be copied, modified, or reproduced in any form or by any means for commercial use without the prior written permission of Cincoze Co., Ltd. All information and specification provided in this manual are for reference only and remain subject to change without prior notice. -
Page 6: Product Warranty Statement
Product Warranty Statement Warranty Cincoze products are warranted by Cincoze Co., Ltd. to be free from defect in materials and workmanship for 2 years from the date of purchase by the original purchaser. During the warranty period, we shall, at our option, either repair or replace any product that proves to be defective under normal operation. -
Page 7: Technical Support And Assistance
Limitation of Liability Cincoze’ liability arising out of the manufacture, sale, or supplying of the product and its use, whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original selling price of the product. The remedies provided herein are the customer’s sole and exclusive remedies. -
Page 8: Conventions Used In This Manual
11. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage. 12. Never pour any liquid into an opening. This may cause fire or electrical shock. DA-1100 Series | User Manual... - Page 9 The equipment has obvious signs of breakage. ⚫ 14. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. 15. Equipment intended only for use in a RESTRICTED ACCESS AREA. DA-1100 Series | User Manual...
-
Page 10: Package Contents
Note: Notify your sales representative if any of the above items are missing or damaged. Ordering Information Model No. Product Description Intel® Pentium®™ Processor N4200 Affordable Fanless DA-1100-N42 Embedded Computer Intel® Celeron® Processor N3350 Affordable Fanless Embedded DA-1100-N33 Computer DA-1100 Series | User Manual... -
Page 11: Optional Modules & Accessories
18AWG/3C Black 1.8M SL-2+SL-3 EU 2 heads power cord, EU G type to IEC C13, H05VV-F SL6-SL3 0.75mm2/3G Black 1.8M SL-6+SL-3 UK 2 heads power cord, UK I type to IEC C13, H05VV-F QP026-SL3 0.75mm2/3G Black 1.8M QP026+SL-3 DA-1100 Series | User Manual... -
Page 12: Chapter 1 Product Introductions
Chapter 1 Product Introductions DA-1100 Series | User Manual... -
Page 13: Overview
1.1 Overview Cincoze’ DA-1100 affordable fanless embedded computer is based on the Intel® Pentium® N4200 / Celeron® N3350 processor. This mainstream Intel® SoC (Apollo Lake) integrates the Intel® Gen 9 graphics architecture with triple display support in 4K/2K UHD resolution. DA-1100 supports both... -
Page 14: Product Pictures
1 x 2.5’’ SATA Drive Bay, 1x mSATA Socket ⚫ 2 x Full Size Mini-PCIe Socket, 1 x SIM Card Socket ⚫ Ultra Compact Size (150x 105 x 52.3mm) ⚫ Wide Operating Temperature -40°C to 70°C ⚫ Safety: LVD EN60950-1 DA-1100 Series | User Manual... -
Page 15: Hardware Specification
• 1x SIM Socket • EMC: CE, FCC Class A • 2x Antenna Holes • Safety: LVD (EN60950-1) Other Function • Watchdog Timer: Software Programmable Supports 256 Levels System Reset • Supports Instant Reboot Technology (0.2 sec) DA-1100 Series | User Manual... -
Page 16: System I/O
Clear CMOS LAN Port 1 & 2 Used to clear CMOS to reset BIOS Used to connect the system to a local area AT/ATX Mode Select Switch network Used to select AT or ATX power mode DA-1100 Series | User Manual... -
Page 17: Rear
Mini-PCIe WiFi module Universal I/O Bracket This expansion area is reserved for Mini-PCIe expansion or Cincoze own pin-defined interface (CMI). CMI interfaces supports various type of I/O modules such as COM / DIO / DisplayPort / DVI / LPT & PS2 / VGA / HDMI. -
Page 18: Mechanical Dimension
1.7 Mechanical Dimension Unit: mm DA-1100 Series | User Manual... - Page 19 Chapter 2 Switches & Connectors DA-1100 Series | User Manual...
-
Page 20: Location Of Switches And Connectors
2.1 Location of Switches and Connectors 2.1.1 Top View DA-1100 Series | User Manual... -
Page 21: Bottom View
2.1.2 Bottom View DA-1100 Series | User Manual... -
Page 22: Switches And Connectors Definition
RS232 / RS422 / RS485 Connectors SODIMM1 SODIMM DDR3L Socket POE_PH1 POE Board to Board Connector BTB_FH1 CMI Module Board to Board Connector SATA1 SATA with Power Connector POWER1 Power Connector with +5V/ +12V Power Output DA-1100 Series | User Manual... -
Page 23: Definition Of Switches
1-2 (Left) Clear CMOS 2-3 (Right) Normal Status (Default) LED1: Power / HDD Access LED Status LED Color Status POWER ON POWER Green HDD Read/Write Blinking Yellow RESET1: Reset Button Switch Definition Push Reset System DA-1100 Series | User Manual... -
Page 24: Definition Of Connectors
+1.5V 46 NA 11 REFCLK- 47 NA 12 SIM_CLK SMB_CLK 48 NA PETN0/USB3TN0 49 NA REFCLK+ 14 SIM_Reset SMB_DATA 50 GND 15 GND PETP0/USB3TP0 51 NA 16 SIM_VPP 52 +3.3V 17 NA 18 GND USB_D- DA-1100 Series | User Manual... - Page 25 +1.5V 46 NA 11 REFCLK- 47 NA 12 NA SMB_CLK 48 +1.5V REFCLK+ PETN0/SATATN0 49 NA 14 NA SMB_DATA 50 GND 15 GND PETP0/SATATP0 51 NA 16 NA 52 +3.3V 17 NA 18 GND USB_D- DA-1100 Series | User Manual...
- Page 26 Reserved LAN1 / LAN2: LAN LED Status Definition Act LED Status Definition Blinking Yellow Data Activity No Activity Link LED Status Definition Steady Green 1Gbps Network Link Steady Orange 100Mbps Network Link 10Mbps Network Link DA-1100 Series | User Manual...
- Page 27 COM1_1 / COM2_1: RS232 / RS422 / RS485 Connector Connector Type: 9-pin D-Sub RS422 / 485 RS485 RS232 Full Duplex Half Duplex Definition Definition Definition DATA - DATA + POWER1: Power Connector Connector Type: 1x4 4-pin Wafer, 2.0mm pitch Definition +12V DA-1100 Series | User Manual...
-
Page 28: Chapter 3 System Setup
Chapter 3 System Setup DA-1100 Series | User Manual... -
Page 29: Removing The Top Cover
3.1 Removing the Top Cover 1. Turn over the unit to have the bottom side face up, loosen the 4 screws of bottom cover and place them aside. 2. Remove the bottom cover from the chassis. DA-1100 Series | User Manual... - Page 30 3. Hold front and rear panel and lift up the body of unit vertically. 4. Turn over the body of the unit and place it gently. DA-1100 Series | User Manual...
-
Page 31: Installing So-Dimm Memory
2. Tilt the SO-DIMM module at a 45-degree angle and insert it to SO-DIMM socket until the gold-pated connector of module contacted firmly with the socket. 3. Press the modules down until it’s fixed firmly by the two locking latches on the sides. DA-1100 Series | User Manual... -
Page 32: Installing Mini-Pcie Cards On Bottom Side
Turn over the body of unit. Unscrew the 4 screws on HDD bracket and remove the bracket. Locate the Mini PCIe slots. Please note that the right connector is shared mSATA/Mini-PCIe interface, and left connector (Support SIM Card to Link feature) is Mini-PCIe interface. DA-1100 Series | User Manual... - Page 33 45° 45° Press down the module and fasten two screws to secure the module. If you have a Half-size Mini-PCIe card, make sure use extender to make it Full-size as shown below. DA-1100 Series | User Manual...
-
Page 34: Installing A Sata Hard Drive
4 provided screws to assemble HDD and HDD bracket together. 3. Turn over the HDD bracket. Connect the HDD bracket to the SATA connector of the unit and fasten the 3 screws. DA-1100 Series | User Manual... -
Page 35: Installing A Half-Slim Ssd
1. Lift up the empty HDD bracket by unscrewing the 4 screws. 2. Fasten the 4 copper pillars. 3. Connect the Half Slim SSD to the SATA connector of the unit and fasten the 4 screws. DA-1100 Series | User Manual... -
Page 36: Installing Antennas
3.6 Installing Antennas 1. Remove the antenna rubber covers on rear panel. 2. Have antenna jack penetrate through the hole. 3. Put on washer and fasten the nut with antenna jack. DA-1100 Series | User Manual... - Page 37 4. Assemble the antenna and antenna jack together. 5. Attach the RF connector at another end of cable onto the module. DA-1100 Series | User Manual...
-
Page 38: Assembling The System
1. Hold the body of unit, and make sure the both sides of front and rear panels are in the chassis grooves and insert the body of unit into chassis. 2. Level the grooves on the cover at front and rear panels. Put on the cover. DA-1100 Series | User Manual... - Page 39 3. Fasten the 4 screws to fix the cover. DA-1100 Series | User Manual...
-
Page 40: Installing A Sim Card
3.8 Installing a SIM Card 1. Loosen 2 screws on the front panel to remove the cover plate. 2. SIM card slots are at the front panel of the system. 3. Insert the SIM card. DA-1100 Series | User Manual... -
Page 41: Wall Mount Brackets
1. The mounting holes are at the bottom side of system. Use provided 4 screws to fasten the bracket with each side on system together. 2. Fasten the screws through the bracket mounting hole to mount system on the wall. DA-1100 Series | User Manual... -
Page 42: Side Mount Bracket
1. Place the side mount bracket on the bottom of system as shown in the picture below, and fasten the rest of 4 screws to fix the side mount bracket with system together. 2. Fasten the screws through the bracket mounting hole to mount system on the wall. DA-1100 Series | User Manual... -
Page 43: Din-Rail Mount Bracket
DA-1100 offers DIN-Rail Mount Bracket that customer can install system on the DIN Rail. 1. The mounting holes are at the bottom of system. Fasten the 2 screws to fix the DIN-Rail mount bracket with system together. DA-1100 Series | User Manual... -
Page 44: Din-Rail Mount Clips (On Side Mount Bracket)
1. Fasten 2 DIN rail mounting clips to the side mount bracket with provided 4 screws as illustrated. 2. Refer to section 3.10 Side Mount Bracket to install the mounting bracket at a side of system. DA-1100 Series | User Manual... -
Page 45: Vesa Mount Bracket
DA-1100 offers VESA Mount that customer can mount system with panel complying with VESA 75mm standard for various usage. 1. Provided below is the base of the system unit and screw holes specified to be mounted from VESA stand. 2. Provided below is mounted with VESA stand. DA-1100 Series | User Manual... - Page 46 3. Provided below is completion of mounting with VESA stand. DA-1100 Series | User Manual...
-
Page 47: Chapter 4 Bios Setup
Chapter 4 BIOS Setup DA-1100 Series | User Manual... -
Page 48: Bios Introduction
You can use arrow keys ( ↑↓ ) to highlight the field and press <Enter> to call up the sub-menu. Then you can use the control keys to enter values and move from field to field within a sub-menu. If you want to return to the main menu, just press the <Esc >. DA-1100 Series | User Manual... -
Page 49: Main Setup
Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. 4.2.1 System Date Set the date. Please use <Tab> to switch between date elements. 4.2.2 System Time Set the time. Please use <Tab> to switch between time elements. DA-1100 Series | User Manual... -
Page 50: Advanced Setup
■ Enable ACPI Auto Configuration [Disabled] Enables or disables BIOS Advanced Configuration Power Interface® (ACPI) auto configuration. ■ Enable Hibernation [Enabled] Enables or disables system ability to hibernate state (OS/S4 state). This option may not be effective with some OS. DA-1100 Series | User Manual... -
Page 51: F81866 Super Io Configuration
Enables or disables Lock Legacy Resources. 4.3.2 F81866 Super IO Configuration Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an optimal setting for the Super IO Device. ■ Serial Port 1~4 Configuration. DA-1100 Series | User Manual... -
Page 52: Hardware Monitor
■ Watch Dog Timer [0] Allows you to set watchdog timer’s value in the range of 0 to 255. 4.3.3 Hardware Monitor This screen displays the current status of all monitored hardware devices/components such as voltages, temperatures. DA-1100 Series | User Manual... -
Page 53: S5 Rtc Wake Settings
[Dynamic Time]: Sets an increase minute(s) from current time to wake system from S5. 4.3.5 Serial Port Console Redirection ■ Console Redirection [Disabled] Allow users to enable or disable COM1, COM2, COM3, COM4 console redirection function. DA-1100 Series | User Manual... -
Page 54: Cpu Configuration
Enables or disables Intel Virtualization Technology. Virtualization enhanced by Intel Virtualization Technology will allow a platform to run multiple operating systems and applications in independent partitions. With virtualization, one computer system can function as multiple virtual systems. 4.3.7 Network Stack Configuration DA-1100 Series | User Manual... -
Page 55: Csm Configuration
[UEFI]: Enables UEFI option ROM only. [Legacy]: Enables legacy option ROM only. ■ Video [UEFI] Controls the execution of UEFI and Legacy Video option ROM. [Do not launch]: Disables option ROM execution. [UEFI]: Enables UEFI option ROM only. DA-1100 Series | User Manual... -
Page 56: Usb Configuration
Enables or disables XHCI (USB3.0) hand-off function. Use this feature as a workaround for operating systems without XHCI hand-off support. ■ USB Mass Storage Driver Support [Enabled] Enables or disables USB mass storage driver support. DA-1100 Series | User Manual... -
Page 57: Chipset Setup
4.4 Chipset Setup This section allows you to configure chipset related settings according to user’s preference. 4.4.1 North Bridge This section provides information on the installed memory size. DA-1100 Series | User Manual... -
Page 58: South Bridge
Allows you to change Mini PCIE2 as [Mini PCIE] or [mSATA]. ■ PSE Enable Selection [Enabled] Enables or disables PSE (Power Sourcing Equipment). ■ LAN1 [Enabled] Enables or disables LAN1 Controller. ■ LAN2 [Enabled] Enables or disables LAN2 Controller. DA-1100 Series | User Manual... -
Page 59: South Cluster Configuration
❑ PCIe Speed [Auto] Allows you to select PCI Express port speed. Configuration options: [Auto] [Gen1] [Gen2]. PCI Express Root Port 6 (MiniPcie) ❑ PCI Express Root Port 6 (MiniPcie) [Enabled] Enables or disables PCI Express Root Port. DA-1100 Series | User Manual... - Page 60 Configuration options: [Auto] [Gen1] [Gen2]. ■ SATA Devices SATA Port 0 ❑ Port 0 [Enabled] Enables or disables SATA Port 0. SATA Port 1 Port 1 [Enabled] ❑ Enables or disables SATA Port 1. ■ Miscellaneous Configuration DA-1100 Series | User Manual...
- Page 61 ❑ Wake On Lan [Enabled] Enables or disables Wake On LAN (WOL) function. ❑ BIOS Lock [Disabled] Enables or disables BIOS the SC BIOS Lock enable feature. It is required to be enabled to ensure SMM protection of flash. DA-1100 Series | User Manual...
-
Page 62: Security Setup
This section allows users to configure BIOS security settings. 4.5.1 Administrator Password Administrator Password controls access to the BIOS Setup utility. 4.5.2 User Password User Password controls access to the system at boot and to the BIOS Setup utility. DA-1100 Series | User Manual... -
Page 63: Boot Setup
Allows you to enable or disable Quiet Boot function. ■ Fast Boot Allows you to enable or disable Fast Boot function. If enabled, system boots with initialization of a minimal set of devices required to launch active boot option. DA-1100 Series | User Manual... -
Page 64: Save & Exit
■ Save as User Defaults This item allows you to save the changes done so far as user defaults. ■ Restore User Defaults This item allows you to restore the user defaults to all the setup options. DA-1100 Series | User Manual... -
Page 65: Chapter 5 Product Application (For Cmi-Dio100 Only)
Chapter 5 Product Application (For CMI-DIO100 only) DA-1100 Series | User Manual... -
Page 66: Digital I/O (Dio) Application
The configuration register is used to control the behavior of the corresponding devices. To configure the register, use the index port to select the index and then write data port to alter the parameters. The default index port and data port are 0x4E and 0x4F, respectively. DA-1100 Series | User Manual... - Page 67 Following is an example to enable configuration and to disable configuration by using debug. -o 4e 87 -o 4e 87 (enable configuration) -o 4e aa (disable configuration) 5.1.1.3 Relative Registers To program the F81866A configuration registers, see the following configuration procedures. DA-1100 Series | User Manual...
- Page 68 WriteByte(DataPort, (ReadByte(DataPort) ǀ 0x0X)) // Set (bit 4~7) = 0 to select GP 54~57 as Input mode. <Input Value> WriteByte(AddrPort, 0xA1) // Select configuration register A1h ReadByte(DataPort, Value) // Read bit 4~7 (0xFx)= GP54 ~57 as High. DA-1100 Series | User Manual...
- Page 69 // Must write twice to enter Extended mode <Select Logic Device> WriteByte(AddrPort, 0x07) WriteByte(dataPort, 0x06) // Select logic device 06h WriteByte(AddrPort, 0x60) // Select configuration register 60h WriteByte(DataPort, (ReadByte(DataPort) ǀ 0x03)) WriteByte(AddrPort, 0x61) // Select configuration register 61h WriteByte(DataPort, (ReadByte(DataPort) ǀ 0x20)) DA-1100 Series | User Manual...
- Page 70 7 6 5 4 3 2 1 0 1 0 0 0 - - - - value - - - - 1 0 0 0 value DIO I/O Port Address 5.1.1.7 Pin Definition Data Bits 0xA05 0xA03 I/O Port address DA-1100 Series | User Manual...
-
Page 71: Digital I/O (Dio) Hardware Specification
DO Signal have to pull up resistor to XCOM+ for external device, the resistance will affect the pull up current Signal High Level: Pull up resistor to XCOM+ Signal Low Level: = XCOM- Sink Current: 1A (Max) DA-1100 Series | User Manual... -
Page 72: Dio Connector Definition
5.2.1 DIO Connector Definition DIO1: Digital Input / Output Connector Connector Type: Terminal Block 1X10 10-pin, 3.5mm pitch Definition XCOM+ XCOM- Pin 1 Pin 1 DA-1100 Series | User Manual... -
Page 73: Chapter 6 Optional Modules And Accessories
Chapter 6 Optional Modules and Accessories Pin Definitions and Settings DA-1100 Series | User Manual... -
Page 74: Location Of The Connectors For Cmi Modules
Bracket with HDMI Cutout for DA Series CMI Module with 1x LPT Port, 1x PS/2 / 1x Universal Bracket CMI-LPPS102/UB0409 with PS/2, LPT Cutout for DA Series Locate the CMI connector on system motherboard as indicated. DA-1100 Series | User Manual... -
Page 75: Cmi-Com Connector Definition And Settings
Connector Type: 9-pin D-Sub RS422 / 485 RS485 RS232 Full Duplex Half Duplex Definition Definition Definition DATA - DATA + COM34_SEL1: COM3 and COM4 Voltage Select Function COM3 0V (RI) 7-9 (Default) COM4 0V (RI) 8-10 (Default) DA-1100 Series | User Manual... -
Page 76: Installing A Cmi-Com Module
1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-COM module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it. 3. Attach the CMI-COM bracket, and fasten 2 screws as marked on photo. DA-1100 Series | User Manual... -
Page 77: Installing A Cmi-Dio Module
1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-DIO module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it. 3. Attach the CMI-DIO bracket, and fasten 2 screws as marked on photo. DA-1100 Series | User Manual... -
Page 78: Installing A Cmi-Dp Module
1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-DP module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it. 3. Attach the CMI-DP bracket, and fasten 2 screws as marked on photo. DA-1100 Series | User Manual... -
Page 79: Installing A Cmi-Dvi Module
1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-DVI module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it. 3. Attach the CMI-DVI bracket, and fasten 2 screws as marked on photo. DA-1100 Series | User Manual... -
Page 80: Installing A Cmi-Vga Module
2. Insert CMI-VGA module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it. 3. Attach the CMI-VGA bracket, fasten 2 screws and 2 D-Sub jack screws as marked on photo. DA-1100 Series | User Manual... -
Page 81: Installing A Cmi-Hd Module
1. Unscrew 2 screws to remove bracket from rear panel. 2. Insert CMI-HD module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it. 3. Attach the CMI-HD bracket, fasten 2 screws as marked on photo. DA-1100 Series | User Manual... -
Page 82: Installing A Cmi-Lpps Module
2. Insert CMI-LPPS module vertically to the female connector on the system’s mainboard, and fasten 2 screws to fix it. 3. Attach the CMI-LPPS bracket, fasten 2 screws and 2 D-Sub jack screws as marked on photo. DA-1100 Series | User Manual... -
Page 83: Installing A Cfm-Poe Module
1. Locate the PoE connector on system motherboard as indicated. 2. Insert the female connector of CFM-PoE module to the male connector on system motherboard. 3. Turn over the heatsink and paste the thermal pad onto the marked by red squares. DA-1100 Series | User Manual... - Page 84 4. Paste the heatsink onto the CFM-PoE module carefully and fasten 2 screws to fix it. 5. Paste the thermal pads onto the heatsink and coil carefully. 6. When the system is power on, please note that the POE LED will light on if the POE module is properly installed. DA-1100 Series | User Manual...
- Page 85 © 2020 Cincoze Co., Ltd. All rights reserved. The Cincoze logo is a registered trademark of Cincoze Co., Ltd. All other logos appearing in this catalog are the intellectual property of the respective company, product, or organization associated with the logo.
Need help?
Do you have a question about the DA-1100 Series and is the answer not in the manual?
Questions and answers