6
Trouble-shooting
You may be able to trouble-shoot the following errors yourself. If not, note down the error
message in full (message, F and E numbers) and call Customer Services.
6.1
Error messages
Display
Possible cause
▪ The foreign body trap is
clogged.
▪ The drain pump is
blocked.
▪ The drain hose is bent or
kinked.
▪ The outlet or drain trap is
clogged.
▪ The foreign body trap is
clogged.
▪ Large items are unevenly
distributed in the washing
drum.
▪ Pillows or similar items in
the wash.
▪ Wash items are tangled. ▸ Separate the wash items.
▪ The foreign body trap is
missing or is not sitting
correctly.
▪ The water tap is turned
off.
▪ The water inlet filter is
clogged.
▪ Water supply is interrup-
ted.
▪ Water pressure is too
low.
Solution
▸ Check causes (see page 21).
▸ Press the
button.
▸ Restart the programme.
▸ Check causes (see page 21).
▸ Press the
button.
▸ Restart the programme.
▸ Wash large and small items together.
▸ Remove the pillows.
▸ Spin the washing again.
▸ Spin the pillows separately.
▸ Fasten duvet covers and pillow cases.
▸ Spin the washing again.
▸ Check causes (see page 21).
▸ Press the
button.
▸ Restart the programme.
▸ Clean water inlet filter or restore water
supply (see page 19).
▸ Press the
button.
▸ Restart the programme.
6 Trouble-shooting
23
Need help?
Do you have a question about the Adora L and is the answer not in the manual?
Questions and answers
Can't find the wool program setting
To find the wool program setting on a V-ZUG Adora L washing machine, follow these steps:
1. Look at the operating and display elements on the machine.
2. Identify the main programmes section.
3. Locate the "Woollens" program, which operates at 30°C.
You can select this program using the control panel to wash wool fabrics safely.
This answer is automatically generated